Read first
What does the law actually ask for?
Picture a busy Saturday. Your RO plant stopped working on Thursday, the plumber is coming Monday, and the kitchen has been using borewell water straight from the tank. Nobody falls sick, but a food safety officer walks in for a routine check and asks to see your water report. The last one is from the day you applied for the licence.
The rules come from Schedule 4 of the FSSAI licensing regulations, the hygiene rulebook every food business follows:
- Everyone, including small registered businesses: water used for cleaning, washing and preparing food must be potable. Drinking water you carry or store (bottled, boiled or purified) must be kept in clean, covered containers away from dust.
- Licensed businesses: only potable water may go into food. Water storage tanks must be cleaned periodically, with a register to prove it. Non-potable water is allowed only for things like fire-fighting or cleaning equipment that never touches food, in separate, clearly marked pipes.
- Ice and steam that touch food must be made from potable water, and handled and stored so they can't get dirty.
FSSAI's inspection checklist for catering and food service, and the Hygiene Rating checklist, turn this into a scored item: potable water meeting IS 10500, tested Twice a year, at least six months apart, with records. It is starred, which means a miss counts heavily against you.
FSSAI's documents don't all say the same thing. Schedule 4 sets no frequency, and the Hygiene Rating guidance document asks for a yearly test, but the checklists inspectors score against ask for Twice a year, at least six months apart. Following the checklist covers both. Ask your food safety officer if you're unsure what applies to your kind of business.
This page is general information, not legal advice. Check the current rules on the FSSAI and FoSCoS portals before you rely on them.
Do I need a test if I use municipal water?
Usually not a lab test. The checklist note says it plainly: Not required if the water comes from the municipal corporation and you keep the water bills; water from a mall, market or private supplier needs that supplier's test report at the same frequency.
That exemption covers the paperwork, not the water itself. Municipal water passes through your building's sump and overhead tank before it reaches the tap, and a dirty tank or a cracked pipe can spoil good water. Keep the bills, clean the tanks on a schedule, and test anyway if the water looks, smells or tastes off.
A water test report also comes up when you apply. The FoSCoS document list for a licence includes a chemical and bacteriological report of the water used as an ingredient, from a recognised or public health lab, for most manufacturers and many other kinds of business. Basic registration doesn't ask for one. See registration or licence for the full document list.
Where does your water come from, and what can go wrong?
| Source | Main risks | What to do |
|---|---|---|
| Municipal supply | Usually treated, but can pick up dirt in your sump, tank or old pipes; supply is often intermittent | Keep water bills; clean tanks; cover tanks tightly; test if anything changes |
| Borewell | Hardness, high TDS, nitrate from nearby septic tanks, fluoride or iron in some regions, and bacteria if the bore or tank isn't sealed | Full IS 10500 test before you start; regular tests after; treatment matched to the report |
| Tanker | You don't know where it was filled; tankers and hoses are often dirty | Use one regular supplier; ask for their source and a recent test report; test your own tank |
| Mall, market or commercial building supply | Same as municipal or borewell, depending on what the building uses | Ask the building management for their test report at the same frequency |
| Packaged drinking water cans (large jars) | Fake or unlicensed brands, refilled jars, dirty seals, cans stored in the sun | Buy only cans with an FSSAI licence number on the label; check seals; store in shade; keep purchase bills |
If you rely on a borewell or tankers, a test is not optional in practice. These are the sources most likely to fail, and the ones an inspector will ask about first.
What does a water test check?
IS 10500 lists dozens of parameters. A lab report for a food business usually covers two groups. You don't need to understand the chemistry, only what each test is looking for.
| Test | What it tells you | IS 10500 limit |
|---|---|---|
| Total coliforms | Whether bacteria have got into the water somewhere, often a dirty tank or leaking pipe | Not detectable in any 100 ml sample |
| E. coli | Whether there is sewage or faecal contamination, the most serious failure | Not detectable in any 100 ml sample |
| pH | How acidic or alkaline the water is | 6.5–8.5 |
| TDS (total dissolved solids) | How much salt and mineral is dissolved; high TDS tastes salty and scales kettles | 500 mg/l acceptable; up to 2,000 mg/l only where no other source is available |
| Turbidity | How cloudy the water is | 1 NTU acceptable; up to 5 NTU only where no other source is available |
| Nitrate | Often from sewage or fertiliser seeping into groundwater | 45 mg/l, no relaxation |
| Fluoride | Naturally high in groundwater in some regions; too much harms teeth and bones | 1.0 mg/l acceptable; up to 1.5 mg/l only where no other source is available |
| Colour, odour, taste, hardness, iron, chloride | The basic physical and chemical checks FSSAI lists for water and ice | Limits set in IS 10500; the report shows each one |
The checklist asks for testing against IS 10500 except the radioactive parameters. Ask the lab for an IS 10500 report suitable for FSSAI; that phrase tells them what you need. A full panel includes heavy metals and pesticides, which matters most for borewell water and for businesses where water is a main ingredient, such as juice, ice or beverage makers.
Where do I get it tested, and what does it cost?
Use a lab whose report an inspector will accept:
- FSSAI-notified labs: FSSAI publishes the list of notified food testing labs on its website, searchable by state.
- NABL-accredited labs: the NABL website has a directory of accredited labs. Check that the lab's accreditation scope covers drinking water testing under IS 10500, not just food or soil.
- State public health or water labs: many states run labs under the public health engineering or water supply department, often at lower rates. Confirm the report will be accepted before you use one for a licence application.
A basic potability test: the common chemical checks plus coliforms and E. coli.
A full IS 10500 panel, with heavy metals and pesticides, costs more: ₹5,000–15,000 per sample. Ask two or three labs to quote for the same list of parameters, since a cheap quote often covers fewer tests. Some labs send someone to collect the sample, which helps because the report then names who collected it and when.
How do I take a water sample properly?
A badly taken sample can fail a good water supply, or pass a bad one. Follow the lab's instructions; this is what they usually ask:
- Get bottles from the lab. Microbiological tests need a sterile bottle, and chemical tests need a separate clean one. Don't reuse a mineral water bottle.
- Pick the tap you actually cook with, usually the kitchen tap or the outlet of your purifier, not a garden tap or the tank lid. If you have two sources, sample both.
- Remove any hose, aerator or filter cup from the tap, and wipe the mouth clean.
- Let the water run for a few minutes to flush the pipe.
- Fill without touching the inside of the bottle or the cap. Leave a little air space if the lab asks for it.
- Label it with the date, time, place and which tap.
- Keep it cool and get it to the lab quickly, within the time the lab gives. Bacteria grow in a warm sample, so a bottle left in a hot scooter boot gives a wrong result.
Take the sample on a normal working day, not just after you've cleaned the tank or changed the filters. The point is to know what your kitchen really uses.
How do I read the report?
A good lab report lists every parameter in a table with your result, the IS 10500 limit and the test method, and ends with a conclusion such as "conforms to IS 10500" or "does not conform". Check:
Results within the permissible limit but above the acceptable one are a warning. They often mean the source is getting worse, or your treatment needs servicing.
Treating water: RO, UV and filters
Treatment fixes specific problems. Match it to your report rather than buying the biggest machine:
| Treatment | What it fixes | What it needs |
|---|---|---|
| Sediment and carbon filters | Dirt, cloudiness, chlorine smell and taste | Cartridges changed on the maker's schedule; dirty filters breed bacteria |
| UV | Bacteria and viruses, in water that is already clear | Lamp changed on schedule; it doesn't work on cloudy water or remove salts |
| RO | High TDS, hardness, nitrate, fluoride and many metals | Membranes and pre-filters changed on schedule; wastes a lot of water; set it so the output doesn't become too low in minerals |
| Boiling | Bacteria, for small quantities | Cool and store covered; doesn't remove chemicals |
| Softener | Hardness that scales boilers, coffee machines and dishwashers | Salt and regeneration; doesn't make water safe to drink |
A purifier only helps if it's maintained. Keep a service card on or near each unit with the date of each filter, membrane or lamp change and who did it. An inspector looks for that, and it's the first thing to check when a test fails.
Clean overhead and underground tanks regularly. Schedule 4 says periodically without fixing how often, so set your own schedule, and clean again after any contamination or failed test. Note each cleaning in a register, as the rules require for licensed businesses.
Ice in drinks counts too
Ice that goes into drinks, juices, shakes or a salad counter is food. It must be made from potable water and kept clean: a covered bin, a scoop with a handle that never rests in the ice, and no hands, glasses or bottles dipped in it.
- Making your own: fill the ice machine from your treated, tested line, and clean and descale the machine on schedule.
- Buying ice: buy only from a supplier with an FSSAI licence for edible ice, and keep their bills. Industrial block ice used for cooling fish or crates is not made for eating and must never go into a drink.
- Keep cooling ice separate: ice used to chill bottles or tubs stays out of drinks.
What if the water test fails?
Don't panic, and don't hide it. Act the same day:
- Stop using that water for food, ice and drinking. Switch to packaged drinking water cans from a licensed supplier until it's fixed.
- Find the cause. For a bacterial failure, check tank lids, the last tank cleaning, the purifier's filters and lamp, and any leak near drains or a septic tank. For a chemical failure such as high TDS or nitrate, the source itself is usually the problem.
- Fix it: clean and disinfect the tanks and pipes, service the purifier, or add the treatment the report points to.
- Retest before you go back to normal use. IS 10500 itself says a coliform result calls for immediate investigation and, at minimum, a repeat sample.
- Write it down: what failed, what you did, and the clean retest report. This turns a failure into proof that your system works.
If an inspector finds the problem first, you'll usually get an improvement notice with time to fix it. Records of what you did help. Read what happens in an FSSAI inspection to know what to expect.
Which records should I keep?
- Every water test report, newest on top.
- Municipal water bills, if you rely on the municipal supply.
- The building's or supplier's test report, if your water comes from a mall, market or tanker supplier.
- The tank cleaning register: date, which tank, who cleaned it.
- Purifier service cards: filter, membrane and lamp changes.
- Bills for packaged drinking water cans and edible ice, showing the supplier's FSSAI number.
- Any failure and the action taken, with the retest.
Keep them in one file in the kitchen office. These sit alongside your other hygiene records, such as cleaning schedules and pest control visits.
Water checklist for a food business
Questions people ask
Does a small registered food business need a water test report?
Basic registration doesn't ask for one, but the water you use must still be potable. Testing is still the only way to know, especially if you use a borewell or tanker.
How often should a restaurant test its water?
FSSAI's inspection and hygiene checklists say Twice a year, at least six months apart, unless you use municipal water and keep the bills. That also covers the yearly test in FSSAI's Hygiene Rating guidance.
Is RO water automatically safe?
No. An RO unit with old membranes or dirty filters can grow bacteria. Test the water coming out of the purifier, and keep its service record up to date.
Can I use packaged drinking water cans instead of testing?
For drinking water and ice, cans from a supplier with a valid FSSAI licence are a sound choice; keep the bills. Water used to cook and wash food still has to be potable, so the tap supply needs the same care.
How much does a water test cost?
A basic potability test is about ₹1,000–3,000 per sample; a full IS 10500 panel is about ₹5,000–15,000 per sample. These are estimates; get quotes for the same list of parameters.
Who should collect the water sample?
You can collect it yourself with the lab's sterile bottle, but many labs send a technician, and the report then names who collected it and when. Licence applications can ask for that detail.
Where these numbers come from
- Cost of a basic water potability test (common chemical and microbiological parameters): ₹1,000–3,000 per sample (all India, NABL-accredited private labs; government labs may charge less). Ballpark Rough range from lab rate sheets and marketplace listings seen online in 2025-26 for an IS 10500 chemical and microbiological package aimed at FSSAI applicants (listings around ₹1,000–2,500, one at ₹1,500; one state lab rate sheet charging ₹800–1,000 for microbial analysis alone). Not a quote; the parameters included vary by lab.
- How often FSSAI's inspection and hygiene checklists expect water to be tested (IS 10500): Twice a year, at least six months apart (FSSAI-licensed food businesses whose water goes into food or touches food or food-contact surfaces; not needed for municipal supply if you keep the water bills. FSSAI's Hygiene Rating guidance asks for at least one test a year). Official source: FSSAI Hygiene Rating Checklist for food service establishments, item 8* and note, checked 9 November 2026.
- Water testing when you use municipal supply: Not required if the water comes from the municipal corporation and you keep the water bills; water from a mall, market or private supplier needs that supplier's test report at the same frequency (food service businesses (FSSAI hygiene rating checklist note)). Official source: FSSAI Hygiene Rating Checklist for food service establishments, item 8* and note, checked 9 November 2026.
- Coliform and E. coli limit under IS 10500: Not detectable in any 100 ml sample (all India (BIS IS 10500:2012, Table 4)). Official source: BIS IS 10500:2012 Drinking Water Specification, Table 4 (hosted by the National Consumer Helpline), checked 9 November 2026.
- pH range for drinking water under IS 10500: 6.5–8.5 (all India (BIS IS 10500:2012, Table 1)). Official source: BIS IS 10500:2012 Drinking Water Specification, Table 1 (hosted by the National Consumer Helpline), checked 9 November 2026.
- Total dissolved solids (TDS) limit under IS 10500: 500 mg/l acceptable; up to 2,000 mg/l only where no other source is available (all India (BIS IS 10500:2012, Table 1)). Official source: BIS IS 10500:2012 Drinking Water Specification, Table 1 (hosted by the National Consumer Helpline), checked 9 November 2026.
- Turbidity (cloudiness) limit under IS 10500: 1 NTU acceptable; up to 5 NTU only where no other source is available (all India (BIS IS 10500:2012, Table 1)). Official source: BIS IS 10500:2012 Drinking Water Specification, Table 1 (hosted by the National Consumer Helpline), checked 9 November 2026.
- Nitrate limit under IS 10500: 45 mg/l, no relaxation (all India (BIS IS 10500:2012, Table 2)). Official source: BIS IS 10500:2012 Drinking Water Specification, Table 2 (hosted by the National Consumer Helpline), checked 9 November 2026.
- Fluoride limit under IS 10500: 1.0 mg/l acceptable; up to 1.5 mg/l only where no other source is available (all India (BIS IS 10500:2012, Table 2)). Official source: BIS IS 10500:2012 Drinking Water Specification, Table 2 (hosted by the National Consumer Helpline), checked 9 November 2026.
- Cost of a full IS 10500 water test (all parameters except radioactive): ₹5,000–15,000 per sample (all India, NABL-accredited private labs). Ballpark Indicative range published by NABL-accredited private labs online in 2025-26 for a full IS 10500 drinking-water panel. Not a quote; price depends on how many parameters (heavy metals and pesticides cost the most) and the city.
Fees, rates and rents change. Check the official source before you pay or sign anything.
Operations · Food and drink
More on operations for a food and drink
5 pages on this. You are on number 4.
- Shelf life of common ingredients and cooked food
- Kitchen hygiene rules for food businesses in India: Schedule 4 in plain words
- Pest control for a food business: how often, who to hire and what records to keep
- Water testing for a food business: when you need it and how to do it
- Food safety inspection: what the officer checks and how to be ready
Reading about it is one thing; doing it in your food and drink is another. If you'd like a hand running it smoothly day to day, tell us where you are and a person will reply, free.
Get help with this ↓What now?
Where are you?
One tap, and we point you to the right next step.