Mobile repair shop · 4 min read

How do I test a parts shipment when it arrives at my mobile repair shop?

The short answer

Open the box in front of the courier or on video, match each part to the order, and test every piece before it goes on a customer's phone: a screen on a test phone or tester, a battery for fit and voltage, a port for fit and charging. Write the result in a batch log with the supplier's name. If anything fails, decide whether to pay, refuse or return before you accept the box.

Not sure about your case? Ask an expert, free ↓

What is the sequence at the counter?

The courier hands over a box and a pen. Behind you a customer waits for the screen inside it. The pressure to sign and move on is exactly when a wrong part gets through, so decide the routine before the box arrives.

  1. Film the box before you open it, showing the label, seal and the courier's name. This is your evidence if the box was tampered with.
  2. Open it on camera and match every part to the order: model number, colour, grade, quantity. A display for one model often looks like another until you hold them side by side.
  3. Compare each part with the invoice. The grade should be written there; see why the grade belongs on the invoice.
  4. Test each part before paying if the supplier offers pay-after-check or cash on delivery. Some online wholesalers advertise open-box delivery and pay-after-check; ask for it in writing before you order.
  5. Log it: date, supplier, part, model, grade claimed, test result.

How do I test each kind of part?

A practice checklist, not a standard. The national technician qualification asks the technician to test with appropriate equipment and to confirm the fault is fixed with no collateral damage.
PartTestReject if
Display or comboConnect it to a test phone or screen tester; check touch across the screen, brightness, dead pixels, lines, colour; check the frame fitsTouch zones fail, lines, uneven colour, wrong connector
BatteryCheck the model code and capacity on the label, fit, and swelling; note the dateSwollen, wrong size, no markings, hot on charge
Charging port or flexFit check, then test on a spare phone for charge and dataLoose pins, misfit, no charging
Small parts, speakers, camerasTest on a spare phoneDistortion, blur, no response

A spare phone of a popular model, kept as a test bench, is a cheap way to test displays and ports: use it only for testing, never for a customer. Keep it charged and clean.

Check the grade by what you can see and measure. A copy screen is often thinner or dimmer than an original, but you cannot prove origin by eye. That is why the invoice grade and a test matter more than your opinion. If a customer asks, say the grade you were sold.

What do you do with a failed test?

If the supplier offers pay-after-check, refuse the piece. If you have paid, write to the supplier the same day with photos and the batch log and follow what to do when the wrong part arrives or how to return a faulty batch. Do not fit a part that failed the test to "see if it works". It will come back as a comeback on a customer's phone.

Keep a rolling record of failures by supplier. After a quarter it tells you who to drop, and gives you facts to show the supplier. See how to tell a good supplier from a bad one.

What usually goes wrong?

  • Signing for a box and opening it later, when the courier is gone.
  • Testing only the first piece of ten.
  • Fitting a screen without testing it, then opening the phone again after the customer sees a line.
  • Not logging, so a bad batch looks like several unrelated comebacks.

Where do I stand?

Set up a spare test phone and a small batch log (a notebook is enough) before your first order. Add a line to your supplier terms: "test on delivery, return within seven days if faulty", and see whether they accept it. If you want help writing that line, tell us where you are.

Questions people ask

Can I tell an original screen from a copy by looking?

Not reliably. Rely on the invoice grade, a test and the supplier's record, not on how it looks.

How long do I have to return a faulty part?

No general rule applies to wholesale parts; it depends on your supplier's terms. Agree a return window in writing before you order.

Should I film every delivery?

For new suppliers and for expensive parts, yes. It costs nothing and settles arguments.

Operations · Mobile repair shop

More on operations for a mobile repair shop

30 pages on this. You are on number 10.

  1. Should a mobile repair shop photograph or film the phone at drop-off?
  2. How do I record the IMEI of every phone I take in at my mobile repair shop?
  3. How do I test a parts shipment when it arrives at my mobile repair shop?
  4. How do I get customers to collect their phone from my repair shop, and what can I do after three months?
  5. What do I do if the wrong part arrives from a distant mobile parts supplier?
  6. What does a mobile repair shop need ready in the last two weeks before opening?
  7. What should I do when police come to my mobile repair shop asking about a handset?
  8. How do I reduce comebacks after repairs at my mobile repair shop?
All 30 on operations →

Reading about it is one thing; doing it in your mobile repair shop is another. If you'd like a hand running it smoothly day to day, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert