Mobile repair shop · 4 min read

Why is my mobile repair shop not profitable? How to find the real problem

The short answer

Check five numbers in this order: jobs a day against your break-even, what each job keeps after parts, how many jobs come back, rent and pay against takings, and the cash tied up in stock. In our worked examples, a solo counter needs about 3.6 jobs per day before any pay and a two-technician metro shop about 6.8 jobs per day; a shop below its number is losing on volume, a shop above it but still thin is losing on margin, comebacks or stock. Fix the biggest gap first, not everything at once.

Not sure about your case? Ask an expert, free ↓

The month the numbers did not add up

The counter is busy, the phone rings, and at the end of the month there is nothing left. The owner blames the neighbouring shop, the supplier or the season. All may be partly true. But a busy shop that loses money has a number wrong somewhere, and busy is not the number to look at.

Work through the five checks below with your last three months of bills. A notebook is enough. Each check points at a different fix.

The five checks

Our diagnostic order. Any one of the five can drain a shop that looks busy.
CheckHow to measureIf it is wrong
1. Jobs a day against break-evenCount jobs on ordinary weekdays and compare with the number from break-evenVolume problem: more customers, lower fixed costs or both
2. What each job keepsAverage bill minus parts and a share for labour; a published screen example keeps 40%Margin problem: pricing, part grade, markup of 20–40% on parts, discounts
3. ComebacksCount jobs redone or refunded in a monthQuality problem: part grade, testing, warranty terms
4. Rent and pay against takingsFixed costs from monthly costs divided by takingsCost problem: rent, a technician you cannot keep busy
5. Cash tied upValue of parts stock and accessories not sold in 60 daysStock problem: dead stock, over-buying

What each answer usually means

  • Below break-even jobs: your lane, rent or visibility is wrong. See first fifty customers and the growth chapter; or cut fixed costs.
  • Enough jobs, low margin: you may be matching the shop next door's price on a copy part. A Nehru Place technician said shops kept lowering prices until it was not sustainable.
  • Many comebacks: parts quality or testing. A failing copy part is a free redo and a lost customer; write the grade on the bill.
  • Costs too high for takings: a second technician hired before volume, or a rent set by a busy lane that your jobs do not match.
  • Stock heavy: parts for models that have gone out of sale, an accessories shelf that does not move, or tools bought and unused.

A shop can have more than one problem. Fix the largest by rupees first.

A worked diagnosis

Our example, not a real shop. A solo counter has fixed costs of ₹15,000 and each job keeps ₹160, so it needs about 94 jobs a month, or 3.6 jobs per day, before pay. The owner counts 70 jobs in the last month: volume is short by about 24 jobs, or ₹3,800 of gross profit. He also counts six jobs redone. Each redo costs the part and the technician's time with no income, so comebacks may cost him as much as the volume gap. Two fixes, one in marketing and one in quality, are better than one fix in either.

Fixes to try, in order of cost

  • Put the part grade and a warranty on every bill; it lowers comebacks and disputes.
  • Raise or hold price on jobs where you give a better part or a warranty; do not follow a cheaper shop down.
  • Clear dead stock at cost and buy to order for slow models.
  • Reduce the technician's idle hours before reducing pay; see the pay and team pages.
  • Renegotiate or move if rent is the cause; see lease terms.
  • Add one line only if the first is working; see the growth chapter.

How this changes by type and size

A counter's first suspects are volume and comebacks. A shop-in-shop owner should look at the host's share. A repair-and-accessories shop should check whether accessories are earning or tying up cash. A chip-level lab should check its success rate on board jobs and whether other shops send enough work. A used-phone dealer should check stock turn and legal exposure. A larger shop should check idle technician hours.

What usually goes wrong

  • Blaming the market and changing nothing.
  • Cutting price when the problem is volume or comebacks.
  • Adding a new line before fixing the old one.
  • Paying a technician below the legal floor and losing him.
  • Not looking at numbers until the cash runs out.

This page is general information, not financial advice. Our diagnostic order and examples are not audited; use your own records, and take a CA's view if the losses are large.

Run the check this week

If cash is the immediate problem, see my repair shop is running out of cash.

Questions people ask

Should I cut prices to win customers back?

Only if you know your margin can take it. Price cuts that your margin cannot carry make a busy shop poorer.

How long should I give it before closing?

Set the test in advance, for example a jobs-a-day number by a date. See the close-or-continue page in this chapter once it is published.

These are ballpark figures to plan with, not a forecast for your business. Your own quotes and numbers come first.

Where these numbers come from

  1. Repair jobs a day a solo technician needs to cover fixed costs, before any owner pay: 3.6 jobs per day (tier-2 town; fixed cost ₹15,000 a month, ticket ₹400, gross margin 40% (₹160 per job), 26 working days = 94 jobs a month). Ballpark ₹15,000 fixed (lender Delhi low end) / (₹400 ticket x 40% margin from the project-report example) = 94 jobs a month / 26 days. At a 30% margin it is 4.8 jobs a day.
  2. Repair jobs a day a two-technician metro shop with accessories needs, before owner pay: 6.8 jobs per day (metro; fixed ₹60,000 (rent 25,000, two technicians at 15,000, other 5,000), ticket ₹600, 40% margin (₹240), accessories contribute ₹17,550 at an assumed 30% margin; the 30% is not sourced). Ballpark (₹60,000 - ₹17,550) / ₹240 = 177 jobs a month / 26 days; if accessory margin is 20% add about one job a day
  3. Gross contribution on a ₹1,500 screen job (screen ₹900, labour ₹300, markup ₹300): 40% (India, illustrative worked example; a ₹600 battery job (battery ₹350, labour ₹150, markup ₹100) gives about 42%). Reported: Sharda Associates, mobile repairing project report sample, checked 14 November 2026.
  4. Markup on spare parts over cost: 20–40% (India; labelled illustrative in the project report). Reported: Sharda Associates, mobile repairing project report sample, checked 14 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Money and tax · Mobile repair shop

More on money and tax for a mobile repair shop

18 pages on this. You are on number 3.

  1. How much does it cost to open a mobile repair shop in India?
  2. Is a mobile repair shop still a good business with phones getting cheaper?
  3. Why is my mobile repair shop not profitable? How to find the real problem
  4. How much does a mobile repair shop owner really earn a month?
  5. My mobile repair shop is running out of cash. What are my options?
  6. What goes into a mobile repair shop's startup cost, line by line?
  7. How much money do I need to start a small mobile repair counter?
  8. What does a mobile repair shop spend every month: rent, pay, parts, power and software?
All 18 on money and tax →

Reading about it is one thing; doing it in your mobile repair shop is another. If you'd like a hand working out your own numbers, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert