Mobile repair shop · 3 min read

How do I test a phone before and after a repair at my mobile repair shop?

The short answer

Test the same list twice. Before the repair, test everything that still works and note what does not, so you cannot be blamed for it later. After the repair, run the list again, with the customer watching, and sign off only when the original fault is fixed and nothing else has broken. A list of about a dozen functions takes a few minutes and catches many comebacks at the counter.

Not sure about your case? Ask an expert, free ↓

What is the list?

The customer is standing at the counter, bag in hand, and you say "all tested." He walks out. On the road he finds the earpiece is silent. It was silent before the repair, but nobody noted it. A list in your hand and a tick on the card would have settled it.

A practice list built on the national technician standard, which asks for testing with appropriate equipment, parts seated properly and no collateral damage.
FunctionHow to testBeforeAfter
TouchDraw across the whole screen and into the cornersNote dead zonesAll zones respond
DisplayFull white, black and colour; look for lines, dead pixels, uneven lightNote defectsClean and even
Camera, front and rearPhoto and video; check focus and flashNote blurClear
Mic and speakersVoice note; call; play a clip at full volumeNote which failsClear on both
ChargingPlug in, check it charges and reads the cableNote slow or looseCharges steadily
SIM and networkPlace a call; check signal and dataNote faultsConnects
Wi-Fi and BluetoothConnect to the shop's Wi-Fi; pair a deviceNoteWorks
Fingerprint or face unlockRegister and unlockNoteWorks
Buttons and vibrationPress each; trigger vibrationNoteAll respond
Proximity and light sensorsCover the sensor during a callNoteScreen turns off
BatteryCheck percentage movement and heatNote any swellingNo heat; no swelling

How do I do it without opening the customer's data?

Test with the shop's own SIM and your own audio clips and photos where you can. If a test needs the phone unlocked, ask the customer to unlock it or remove the lock, rather than take his passcode. Do not scroll through messages or the gallery. A test photo you take yourself checks the camera; the customer's old photos tell you nothing about it. See what to do if personal photos show up while testing.

What do I do at handover?

  1. Run the after-list at the counter with the customer, not at the back.
  2. Show the original fault is gone, then show the rest of the list works.
  3. Point to anything that was already faulty on the card and say so.
  4. Hand over the card and bill, and have him sign that the phone was tested and received.
  5. Tell him when you will call to check on it.

A signed handover is the last link in the chain that starts at check-in. When something fails later, the two lists show what changed.

What equipment helps?

A DC power supply, at about ₹7,000 per piece, shows how much current a phone draws and exposes shorts. A multimeter checks continuity. For ordinary jobs, the phone itself and a few apps are enough. See what tools a shop needs on day one.

What usually goes wrong?

  • Testing only the repaired function and nothing else.
  • Testing after packing the phone, in a hurry.
  • No before-list, so an old fault becomes your fault.
  • A battery that feels hot on the bench and is handed over anyway.

Where do I stand?

Print the table, cut out the columns and stick it above the bench. Run it on your next ten phones and see which line catches the most. If you want a short version for a tablet or a laptop, tell us where you are.

Questions people ask

How long should a post-repair test take?

A few minutes on a list of a dozen functions once you have the habit.

Should I test before I quote?

Do a quick pre-test at check-in. A fuller test happens once the phone is open.

What if the customer will not wait?

Test it yourself and sign the card, and tell him you tested it.

Where these numbers come from

  1. Adjustable DC power supply, 30 V 5 A: ₹7,000 per piece (IndiaMART seller, New Delhi). Reported: IndiaMART, SK Telecom (New Delhi), mobile repairing tools listing, checked 14 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Operations · Mobile repair shop

More on operations for a mobile repair shop

30 pages on this. You are on number 23.

  1. Why should the part grade be written on the supplier's invoice at a mobile repair shop?
  2. What do I do with mobile repair parts for a model that has gone out of sale?
  3. How do I test a phone before and after a repair at my mobile repair shop?
  4. Mobile repair parts prices in India: wholesale and what customers pay
  5. Should a mobile repair shop send complex jobs to a chip-level specialist?
  6. How do I store customers' phones overnight and keep them from getting mixed at my repair shop?
  7. What do I do with old screens, batteries and dead boards at my mobile repair shop?
  8. What work records should a mobile repair shop keep for tax and for the police?
All 30 on operations →

Reading about it is one thing; doing it in your mobile repair shop is another. If you'd like a hand running it smoothly day to day, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert