Mobile repair shop · 5 min read

Which repairs should my mobile repair shop offer and which should it refuse?

The short answer

Offer the repairs you can do reliably with parts whose grade you can name and a tool you own: for most new shops that is screens, batteries, charging ports and software. Send board-level and data-recovery jobs to a specialist until you have the skill and the kit, and refuse anything that touches an IMEI or unlocks a phone without proof of ownership, because that carries up to 3 years in jail. A short menu that you do well beats a long one you do badly, and the 'no' list is as important as the 'yes' list.

Not sure about your case? Ask an expert, free ↓

The board nobody should have touched

A customer brings a phone with a dead board. 'The shop next door said they could do it.' The owner has never done board work, and has no microscope, but it is a ₹2,000 job and the customer is waiting. He says yes. The phone comes back worse, and a ₹2,000 job becomes a refund and a one-star review.

Every repair you offer is a promise. So choose the list the way you choose a supplier: by what you can deliver, not by what is asked.

Three questions for every repair

  • Can I do it reliably? Have you done it ten times on practice phones, and did every one pass? If not, it is not on the menu yet.
  • Can I get the part, and name its grade? If the only source is an unknown seller, you cannot write the grade on the bill. See original, OEM, copy and TFT screens.
  • Does it pay? Price it with the part, your time and the odds of a comeback. See what margin to keep on parts.

If the answer to any is no, the repair goes to the 'later' or 'refer' list.

A menu in four tiers

Our suggested tiers; costs are from IndiaMART and lender pages. A typical kit with microscope, OCA machine and ultrasonic cleaner is about ₹60,000.
TierRepairsTools and cost
Core: offer on day oneScreen, battery, charging port, speaker or mic, software and updatesA hand kit is about ₹17,600
Add when busyBack glass, camera glass, vibration, buttons, basic water-damage cleanAdd an ultrasonic cleaner (₹3,000–8,000) and a microscope
Add with a skilled technicianBoard-level repair, charging and power circuits, data recoveryA fuller board-level set is ₹60,000–2,50,000
Refer or refuseIMEI changes, unlocking without proof, repairs with a part you cannot trace, repairs that need a tool you do not haveNo tool fixes a legal risk

An OCA laminator is worth buying only if you refurbish screens, which is a separate business. The research notes a pattern of owners spending ₹60,000 or more on an OCA laminator before there were customers for it.

The refuse list, and why each is there

Refusing is easier with a line: 'The shop does not do this.' It is not personal and it is not a negotiation.

How to refer a job well

Referring a board job to a specialist is not a loss. Agree beforehand how you split the charge, who talks to the customer and who stands behind the result. We found no source describing how these deals work, so write the terms down. See sending complex jobs to a specialist. Tell the customer who is doing the work, and keep the job card in your name.

Customers who prefer a repair in their presence (92% of brand-service users in one survey) may not like a phone leaving the shop. Say where it is going and when it will be back.

If you are small, if you are large

Small. Keep the menu to five or six repairs and say so. A short list helps you stock the right parts and keep the bench clear. Add a repair only when you have been asked for it three times and can do it.

Large. Each added line needs a person who can do it and a person who can cover. If your board technician leaves, that line leaves too, so decide whether to keep it on the card. See what happens if a technician leaves.

What usually goes wrong

  • Saying yes to a job you have never done because the customer is waiting.
  • Offering board work without a microscope.
  • Buying a tool because a video made the repair look easy.
  • Taking an IMEI or unlocking job for a regular who 'lost the bill'.
  • A menu so long that nobody can say what the shop is good at.

Apply it to your shop

If you want help choosing what to add next, tell us your skills, tools and the jobs you turn away.

Questions people ask

Which repairs should a new mobile repair shop start with?

Screens, batteries, charging ports and software, with parts whose grade you can name. Add the rest as skill and demand grow.

Should I do board-level repair?

Only with the skill and the kit. A fuller set costs ₹60,000–2,50,000. Until then, refer such jobs.

Is unlocking a phone allowed?

Not without proof of ownership. Police advisories in some districts say to check ID and the IMEI database first.

How many repairs should be on my menu?

As many as you can do reliably. For a new counter that is often five or six.

Where these numbers come from

  1. Longest jail term for tampering with an IMEI or knowingly keeping a tampered handset: 3 years (all India; Telecommunications Act 2023 s.42(3)(c) and (f); a fine up to ₹50 lakh, or both). Official source: PIB, Telecommunications Act 2023 section 42: IMEI tampering and possession of tampered handsets (17 Nov 2025), checked 14 November 2026.
  2. Low tool kit: screwdrivers, a budget hot air gun, soldering iron, multimeter, separator, pry tools and DC supply: ₹17,600 (India, our sum of IndiaMART and lender low ends (500 + 1,550 + 1,999 + 800 + 5,600 + 200 + 7,000); the lender's Maharashtra basic kit is ₹8,000-15,000). Ballpark Sum of the lowest listing prices on IndiaMART and the lender blogs (hot air 1,550 is an older listing price; the live page now starts at 1,700), asking prices, ex-GST
  3. Ultrasonic cleaner: ₹3,000–8,000 (Tamil Nadu lender figure; the project-report vendor lists ₹8,000-20,000 by capacity). Reported: IIFL, how to start a mobile repair shop in Tamil Nadu (26 Jun 2026), checked 14 November 2026.
  4. Full tool set for fuller, board-level service: ₹60,000–2,50,000 (India; microscope and soldering ₹25,000-80,000, hot air ₹8,000-30,000, diagnostics ₹15,000-60,000, ultrasonic ₹10,000-40,000). Reported: IIFL, financing a mobile repair shop: spare parts inventory and tools (14 Jul 2026), checked 14 November 2026.
  5. Typical kit: the low kit plus a trinocular microscope, an OCA machine and an ultrasonic cleaner: ₹60,000 (India, our sum (17,600 + 16,500 + 23,250 + 3,000); the OCA machine now lists from about ₹24,999, so about ₹62,000). Ballpark Sum of IndiaMART asking prices for the low kit, a trinocular microscope (16,500), an OCA machine (23,250 then, 24,999 now) and an ultrasonic cleaner (3,000), ex-GST
  6. Largest fine for tampering with an IMEI: ₹50 lakh (all India; Telecommunications Act 2023 s.42(3); jail, fine or both). Official source: PIB, Telecommunications Act 2023 section 42: IMEI tampering and possession of tampered handsets (17 Nov 2025), checked 14 November 2026.
  7. Bail position of an IMEI-tampering offence: cognizable and non-bailable (s.42(7)); abetment carries the same punishment (s.42(6)) (all India). Official source: PIB, Telecommunications Act 2023 section 42: IMEI tampering and possession of tampered handsets (17 Nov 2025), checked 14 November 2026.
  8. Longest jail term for receiving or keeping stolen property: 3 years (all India; BNS s.317(2); jail, fine or both; helping to hide or dispose of it is also up to 3 years (s.317(5))). Official source: Bharatiya Nyaya Sanhita 2023, section 317 (Gazette of India no. 53, 25 Dec 2023), checked 14 November 2026.
  9. Brand-service users who prefer a repair done in their presence: 92% (13 tier 1-2 cities, 2,000+ users, Counterpoint Aug 2024; brand-sponsored). Reported: Communications Today, Counterpoint survey on repair in presence (Aug 2024), checked 14 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Product and pricing · Mobile repair shop

More on product and pricing for a mobile repair shop

13 pages on this. You are on number 12.

  1. How do I avoid a price war with the shop next door in my mobile repair business?
  2. Should I put up a rate card for repairs at my mobile repair shop?
  3. Should I charge a fee just to look at a phone in my mobile repair shop?
  4. Should I take an advance on a mobile repair, and how much?
  5. What do I tell a customer whose phone is not worth repairing?
  6. How do I price and promise a water-damage job at my mobile repair shop?
  7. Which repairs should my mobile repair shop offer and which should it refuse?
  8. Which accessories actually make money in a mobile repair shop?
All 13 on product and pricing →

Reading about it is one thing; doing it in your mobile repair shop is another. If you'd like a hand getting your offer and pricing right, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert