Read first
Three rooms, one empty
A PG near an IT park has twelve rooms: eight triples, two doubles and two singles. By August the triples are full. A single has been empty for six weeks because the rent is too high for the area. A double has one empty bed because the second resident is waiting for a friend to join. The owner has a full house on paper and two rooms producing less than half what they could.
The mix is set when you build or convert. It is hard to change later without walls, so it is worth getting roughly right before the first resident.
What each room type earns
| Room | Who takes it | Rent per resident | What to watch |
|---|---|---|---|
| Triple or four-sharing | Students, early-career staff, the price-sensitive | The lowest per person | Fills fastest; most wear on the room; privacy complaints |
| Double | Friends, couples of the same kind of resident, working people who want some privacy | Middle | Often the highest rent per bed; a vacancy in one bed empties half the room |
| Single | Working professionals, women living alone, residents who pay for quiet | The highest per person | Fills slowest where the lane is price-sensitive; ties up the most space per rupee |
A Bengaluru example from Whitefield and ITPL: single ₹13,000 to ₹18,000, double ₹9,500 to ₹13,500, triple ₹7,000 to ₹10,000 a month per occupant (Whitefield and ITPL, 2026). In Marathahalli: single ₹10,000 to ₹14,000, double ₹8,000 to ₹11,000, triple ₹6,000 to ₹9,000 a month per occupant (Marathahalli). The step from triple to single is large and the middle step is not small either: the market is paying for privacy. See PG rent by city for the other cities.
Per bed, per room and per square foot
Three ways to compare, and they give different answers. In the 50-bed model, a full triple room earns ₹25,500 per room per month and a full double ₹23,000 per room per month. Per room the triple wins, because it has three paying residents. Per bed the double wins, at ₹11,500 against ₹8,500. Per square foot at 70 square feet a person, about ₹121 a sq ft for the triple (₹25,500 over 210 sq ft) and about ₹164 for the double (₹23,000 over 140 sq ft).
Seventy square feet an occupant is the floor in Bengaluru's court-recorded PG framework (70 sq ft per occupant), used here as a yardstick. Other cities set their own or none; see beds per room and area per person.
If space is the constraint, the double earns more from the same floor. If demand is the constraint, the triple fills first. The honest answer is both: you want a mix, and the weight depends on whether your problem is empty beds or thin rent.
What the mix does to occupancy and break-even
- Triples give you volume. More beds in the same building, a faster fill, and a lower break-even occupancy because each occupied bed adds its rent against fixed costs.
- Singles give you margin and risk. A single earns most per resident but a single vacancy is a whole room. In a lane where singles do not fill, one or two vacant rooms can undo the extra.
- Doubles are the middle. They suit residents who want some privacy and will pay for it, and they are the usual way to lift the average rent per bed without losing the beds.
- Empty beds cost the same in any room. In our models an empty bed costs about ₹4,734 in the 10-bed owned house and ₹6,106 in the 50-bed leased PG, which is 57% and 63% of the bed's rent each month; a room type that sits empty costs that for every bed.
So test the mix against the rent per bed your building needs. See what to charge per bed for the break-even rents in the models: a leased building with a high lease needs the double-and-single mix to reach its average, while a house with no rent can live with triples.
How to choose the mix for your PG
- Start from the resident. Students and early-career staff want a triple or double at the lowest rent; working professionals in an IT park want a double or single; a ladies' PG often has more singles and doubles because parents pay for safety and privacy.
- Check the lane. Count the triples, doubles and singles within a kilometre and see which are vacant. A lane with a lot of vacant singles does not need yours.
- Keep the mix flexible. Fix the rooms but price the beds. A double that can take a third bed at a lower rent in the admission season gives you a way to fill.
- Plan for the slow months. In a student PG the triples fill in the season and empty after; see the admission season.
- Mind the rules. Some cities set an area per resident, which limits how many beds fit in a room. See the city rules.
What usually goes wrong
- Building mostly singles in a lane where residents share, and watching rooms sit empty.
- Packing triples into rooms too small for the area rule, then facing a notice.
- Pricing the single from the other cities' guides and not from the lane.
- Leaving a double half-full for months instead of offering the second bed at a fair rate.
- Changing the mix after opening without costing the walls and the time rooms are closed.
Apply it to your PG
If you are choosing the mix for a building you are about to lease or convert, tell us the rooms, the lane and the rent you hope for and we will help you run the mix both ways.
Questions people ask
Which PG room type earns the most?
Per room, usually the triple; per bed and per square foot, the double or single. Which wins depends on whether your problem is demand or space.
How many single rooms should a PG have?
Only as many as your lane will fill at a rent that pays. Check the vacancies in nearby PGs before you build singles.
Is it better to convert triples to doubles?
It raises rent per bed and cuts beds. Work out the room's rent before and after and the walls and time it needs.
Do couples or friends take doubles?
Friends and residents who want some privacy do. Some PGs do not let couples stay; set the house rule early.
Where these numbers come from
- Monthly rent of one full triple room in the 50-bed model (3 beds at ₹8,500): ₹25,500 per room per month (worked model, 50-bed leased PG with meals). Ballpark 3 x ₹8,500, the triple-bed rent in pg-accommodation.model-leased-50bed-assumptions.
- Monthly rent of one full double room in the 50-bed model (2 beds at ₹11,500): ₹23,000 per room per month (worked model, 50-bed leased PG with meals). Ballpark 2 x ₹11,500, the double-bed rent in pg-accommodation.model-leased-50bed-assumptions.
- Rent per square foot of room at 70 sq ft per occupant: triple room against double room, in the 50-bed model: about ₹121 a sq ft for the triple (₹25,500 over 210 sq ft) and about ₹164 for the double (₹23,000 over 140 sq ft) (worked model; 70 sq ft per occupant is the Bengaluru court-recorded floor (pg-accommodation.bbmp-pg-min-area), used here only as a yardstick). Ballpark ₹25,500 / (3 x 70) = ₹121.4; ₹23,000 / (2 x 70) = ₹164.3. Room size is the only input beyond the model rents.
- PG rent Whitefield/ITPL single/double/triple: single ₹13,000 to ₹18,000, double ₹9,500 to ₹13,500, triple ₹7,000 to ₹10,000 a month per occupant (Whitefield and ITPL, 2026) (Karnataka, Bengaluru Whitefield, 2026). Reported: A co-living operator's blog (name withheld), PG rent Whitefield/ITPL single/double/triple, checked 14 November 2026.
- PG rent Marathahalli: single ₹10,000 to ₹14,000, double ₹8,000 to ₹11,000, triple ₹6,000 to ₹9,000 a month per occupant (Marathahalli) (Karnataka, Bengaluru, single/double/triple). Reported: A co-living operator's blog (name withheld), PG rent Marathahalli, checked 14 November 2026.
- Minimum area per occupant, Bengaluru PG licensing: 70 sq ft per occupant (Bengaluru). Official source: Karnataka High Court order, Princess Ladies PG v Chief Commissioner (10 Sep 2026), Minimum area per occupant, Bengaluru PG licensing, checked 14 November 2026.
- What an empty bed costs a PG each month: about ₹4,734 in the 10-bed owned house and ₹6,106 in the 50-bed leased PG, which is 57% and 63% of the bed's rent (worked models). Ballpark Rent x 0.98 minus the food (₹2,500) and power (₹900) that stop when the bed is empty. 10-bed: ₹8,300 x 0.98 - 3,400 = ₹4,734; 50-bed: ₹9,700 x 0.98 - 3,400 = ₹6,106. Five points of occupancy in 50 beds (2.5 beds) is ₹15,265 a month.
Fees, rates and rents change. Check the official source before you pay or sign anything.
Product and pricing · PG or paying guest accommodation
More on product and pricing for a pg or paying guest accommodation
8 pages on this. You are on number 2.
- What should I charge per bed in my PG: single, double or triple sharing?
- Single, double or triple rooms: which mix fills fastest and pays most in a PG?
- How much more should an AC room cost in a PG, and does an AC room pay back?
- What should PG rent include: meals, laundry, Wi-Fi, power and housekeeping?
- Should my PG serve meals or not? What each choice does to cost, staff and profit
- How do I plan a PG's weekly menu so residents stay and costs hold?
- A new PG or co-living building opened nearby. How do I price now?
- How and when can I raise PG rent without losing residents?
Reading about it is one thing; doing it in your pg or paying guest accommodation is another. If you'd like a hand getting your offer and pricing right, tell us where you are and a person will reply, free.
Get help with this ↓What now?
Where are you?
One tap, and we point you to the right next step.