Mobile repair shop · 4 min read

How much does a chip-level mobile repair kit really cost: microscope, hot air and power supply?

The short answer

A full tool set for board-level work runs ₹60,000–2,50,000 in our sources, and adding chip-level repair and data recovery to an existing counter was estimated by one owner at about ₹2–3 lakh of extra equipment. A whole chip-level lab, with stock and fit-out, is ₹12–25 lakh in a project-report vendor's range. The tools are the small part; the skill and the steady supply of jobs decide whether you earn it back.

Not sure about your case? Ask an expert, free ↓

What is in a board-level set, and what does each part cost?

A phone arrives dead after a fall. The customer has no backup and says the photos matter more than the phone. This is the job chip-level kit is for, and the kit is a long list.

Listings and consultant ranges, November 2026. Ask for written quotes: prices differ widely between sellers.
ItemRangeNotes
Microscope and soldering₹25,000–80,000A trinocular stereo microscope alone is ₹16,500–23,000 per piece at one Delhi seller
Hot air rework₹8,000–30,000Budget guns start at ₹1,700–5,000 per piece; BGA stations go to about ₹40,000
Diagnostics₹15,000–60,000Power supply, meters and testers; a 30 V 5 A supply is about ₹7,000 per piece
Ultrasonic cleaning₹10,000–40,000A lender gives ₹3,000–8,000; the project-report vendor lists more for larger units
Total set₹60,000–2,50,000Project-report vendor ranges

A programmer or flashing box is another ₹5,000 to ₹15,000 and not a necessity. Some boxes are made to change IMEI numbers, and tampering with an IMEI can bring up to 3 years in jail and a fine up to ₹50 lakh. Use a box only for legal software work, and keep a record of what you flashed and why.

What does a whole chip-level lab cost?

Tools are a fraction. A project-report vendor puts a full chip-level lab, including fit-out and stock, at ₹12–25 lakh, against ₹2–5 lakh for a basic counter. That range is a consultant's, not owner data, and published estimates of this sort differ by about three times.

The people cost more than the tools. A chip-level lab runs with two to four people. Board-level technicians are scarcer than screen technicians and can set up across the road once they know the work; the option of sending complex jobs to a specialist avoids hiring for them.

What did an owner say about getting it back?

An owner in Agartala told a reporter in 2025 that newer phones need specialisation part by part, and that he was unsure he could recover the investment in the microscope and assembly machine he was considering. He had learned from Facebook and YouTube videos. That is one owner, so it is an anecdote, not a pattern, but it names the right worry.

The research also lists "equipment not recovering cost" among common operating failures. Board-level work charges more per job than a screen swap, but you need enough jobs, and enough of them must succeed. A failed board repair earns nothing and may cost a part.

How do I decide before I buy?

  1. Count the board jobs you turned away in the last three months. If it is fewer than a handful, wait.
  2. Ask two nearby counters whether they would send you their board work. If yes, that is a B2B base; the chip-level lab type page explains how that work comes in.
  3. Rate your own skill honestly. A course or an apprenticeship under a board repairer comes before the microscope.
  4. Buy the cheapest level that lets you do the jobs you are sure of: USB camera first, trinocular microscope next, better rework station last.
  5. Price one job type, such as charging IC replacement, and work out how many repairs repay the kit.

A written rule helps: for each board job you accept, decide before opening the phone whether it is worth repairing or writing off; the chip-level lab type page covers how labs make that call.

What usually goes wrong?

  • Spending the whole loan on tools and having no cash for parts or rent.
  • Buying the microscope but not the practice time, so jobs fail.
  • Taking board jobs from other shops at low rates because you need volume.
  • Handling dead phones with data and no record of consent; see what to do when personal photos show up.

Where do I stand?

Start with do I need a hot air station and a microscope, and when. If you still want the whole set after counting turned-away jobs, bring that count and your cash position when you tell us where you are.

Questions people ask

Can I start a chip-level lab with ₹1 lakh?

You can buy a basic set for that, but a lab with stock and fit-out is ₹12–25 lakh in a project-report vendor's range. Start with the tools you can use on jobs you already get.

Is a flashing box legal?

Using it for legitimate software work is fine. Changing an IMEI is a crime with up to 3 years in jail and a fine up to ₹50 lakh.

How long does a chip-level kit take to pay back?

No source measures it for chip-level labs. General counter payback is in the range of 8 to 25 months on our arithmetic.

Where these numbers come from

  1. Full tool set for fuller, board-level service: ₹60,000–2,50,000 (India; microscope and soldering ₹25,000-80,000, hot air ₹8,000-30,000, diagnostics ₹15,000-60,000, ultrasonic ₹10,000-40,000). Reported: IIFL, financing a mobile repair shop: spare parts inventory and tools (14 Jul 2026), checked 14 November 2026.
  2. Extra equipment to add chip-level repair and data recovery to a counter shop: ₹2–3 lakh (India; one Agartala, Tripura owner's own estimate in 2025, who was unsure he could recover it). Reported: India Development Review, can local repair shops help reduce e-waste (27 Mar 2025), checked 14 November 2026.
  3. Total cost to open a mobile repair shop, by type (project-report vendor ranges): ₹2–5 lakh (India. Standalone counter, repair-and-accessories and chip-level are the vendor's basic, multi-service and advanced bands (they include stock and fit-out); other types have their own facts below). Reported: Sharda Associates, mobile repairing project report sample, checked 14 November 2026.
  4. Trinocular stereo microscope: ₹16,500–23,000 per piece (IndiaMART seller, New Delhi; a USB digital microscope camera is about ₹2,700-3,000). Reported: IndiaMART, SK Telecom (New Delhi), mobile repairing tools listing, checked 14 November 2026.
  5. Hot air rework station: ₹1,700–5,000 per piece (IndiaMART sellers, Nov 2026; budget units mostly ₹3,500-5,000; better units ₹8,000-15,000; multifunction BGA stations up to about ₹40,000). Reported: IndiaMART, SMD rework station listings, checked 14 November 2026.
  6. Adjustable DC power supply, 30 V 5 A: ₹7,000 per piece (IndiaMART seller, New Delhi). Reported: IndiaMART, SK Telecom (New Delhi), mobile repairing tools listing, checked 14 November 2026.
  7. Ultrasonic cleaner: ₹3,000–8,000 (Tamil Nadu lender figure; the project-report vendor lists ₹8,000-20,000 by capacity). Reported: IIFL, how to start a mobile repair shop in Tamil Nadu (26 Jun 2026), checked 14 November 2026.
  8. Longest jail term for tampering with an IMEI or knowingly keeping a tampered handset: 3 years (all India; Telecommunications Act 2023 s.42(3)(c) and (f); a fine up to ₹50 lakh, or both). Official source: PIB, Telecommunications Act 2023 section 42: IMEI tampering and possession of tampered handsets (17 Nov 2025), checked 14 November 2026.
  9. Largest fine for tampering with an IMEI: ₹50 lakh (all India; Telecommunications Act 2023 s.42(3); jail, fine or both). Official source: PIB, Telecommunications Act 2023 section 42: IMEI tampering and possession of tampered handsets (17 Nov 2025), checked 14 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Place and setup · Mobile repair shop

More on place and setup for a mobile repair shop

22 pages on this. You are on number 10.

  1. Is a repair counter inside a phone seller's shop better than my own mobile repair shop?
  2. How big should a mobile repair shop be, in square feet?
  3. How much does a chip-level mobile repair kit really cost: microscope, hot air and power supply?
  4. Is a 3-month mobile repair course enough to open my own mobile repair shop?
  5. When should I change what my mobile repair shop offers: add accessories, used phones or chip-level work?
  6. Should a mobile repair counter be near a college, offices or a market?
  7. Which type of mobile repair business should I start: counter, accessories, chip-level, used phones or doorstep?
  8. Mobile repair tool prices in India, item by item
All 22 on place and setup →

Reading about it is one thing; doing it in your mobile repair shop is another. If you'd like a hand choosing and setting up the right place, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert