Mobile repair shop · 4 min read

How do I set up a mobile repair bench: lighting, ESD mat, storage and seating?

The short answer

Set the shop in three zones: a front counter for billing and talking, a bench in view for the work, and a lockable store for customers' phones and parts. The bench needs good light, an earthed ESD mat and wrist strap, separate sockets for the rework station and power supply, and a clean area for refitting screens. A counter, display and furniture for a small shop cost about ₹10,000–25,000.

Not sure about your case? Ask an expert, free ↓

What are the three zones?

A customer leans over the counter and asks, "Can I watch?" That one request decides your layout: you need a bench where the answer is yes, and a counter where the phone changes hands cleanly.

  • Front counter: billing, job-card book, a few accessories, a place to put a phone down and photograph it.
  • Bench: where the repair happens, visible from the counter, away from the door so dust and wind do not hit open screens.
  • Store: a lockable drawer or tray rack for customers' phones, tagged by job number, and a separate shelf or cabinet for parts.

Repairing in view calms the customer, and in a brand-sponsored survey 92% of service users preferred it. See how big a shop should be for the area these zones need.

What does the bench itself need?

The national technician qualification asks for ESD precautions, a clean dust-free bench, lead-free soldering tools and protective goggles and gloves before work.
ItemWhat to look for
Bench topFlat and hard, at a height where your elbows rest; a lip so screws do not roll off
ESD mat and wrist strapBoth connected to a real earth point. A strap clipped to nothing protects nothing.
LightingA bright, shadowless lamp over the bench plus a second movable light; daylight from a window helps
SocketsSeparate earthed sockets for the rework station and the power supply, so one does not trip the other
Dust controlA clean section for opening and refitting screens, wiped before each job
SeatingA chair with a back for a technician who sits for hours
SafetyGoggles and gloves for soldering and for swollen batteries

Static damages small surface-mount parts, and you cannot see it happen. Soldering stations are normally ESD-safe by design, but the mat and strap still matter when you handle chips and flex cables. Get the earthing checked by an electrician. The tools to put on the bench are in what tools a shop needs on day one.

How should I store customers' phones and batteries?

Tag every phone with its job number and put it in the same compartment every time. At night it goes into the locked store. For why this matters and how to avoid mix-ups, see how to store customers' phones overnight.

Keep loose and swollen batteries away from the counter, customers and children. A news report in February 2026 described a boy biting a loose phone battery at a repair counter and it exploding (other reports did not confirm the city, so treat it as a warning, not a statistic). No Indian rule on battery storage in repair shops was found; ask your local fire office. General repair guidance, much of it from outside India, is to keep a swollen battery away from flammables and never charge it, power it on or pry it.

What does the fit-out cost?

A lender's Maharashtra figure for a counter, display and furniture is ₹10,000–25,000. A fitted small shop with shelving, lighting and a glass front is more: our estimate is ₹50,000 to ₹1 lakh, an estimate with no source behind it. Ask a local carpenter for a quote; do not build more than the first three zones need. The full cost by line is in repair setup costs.

What usually goes wrong?

  • No earth point at the bench, so the ESD mat is decoration.
  • Customers' phones sit in a pile on the counter and two jobs get swapped.
  • A bench against the shutter, where wind and sun hit the screen work.
  • Parts and phones in the same drawer, so a part gets sold or a phone loses a screw.
  • Batteries stored in the open, within reach of a child.

Where do I stand?

Draw your unit and place the three zones. Mark the earth point, the sockets and the store. If you cannot fit all three, the unit is too small or the plan is too ambitious; see the last two weeks before opening for what must be done before the first phone arrives. You can tell us where you are if you want the layout reviewed.

Questions people ask

Do I need an ESD mat for phone repair?

The national technician qualification asks for ESD precautions. A mat and wrist strap, properly earthed, are cheap compared with a ruined board.

How much does a repair counter cost to build?

A lender figure for a small counter and furniture is ₹10,000 to ₹25,000. A fitted small shop is more, and our ₹50,000 to ₹1 lakh figure is an estimate.

Should the bench face the customer?

Many owners place it in view, since customers prefer to watch. Make sure the work area is also protected from dust.

Where these numbers come from

  1. Counter, display and furniture for a small shop: ₹10,000–25,000 (Maharashtra, small shop; a fitted small shop at ₹50,000-1 lakh is our estimate (no source)). Reported: IIFL, how to start a mobile repair shop in Maharashtra (25 Jun 2026), checked 14 November 2026.
  2. Brand-service users who prefer a repair done in their presence: 92% (13 tier 1-2 cities, 2,000+ users, Counterpoint Aug 2024; brand-sponsored). Reported: Communications Today, Counterpoint survey on repair in presence (Aug 2024), checked 14 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Place and setup · Mobile repair shop

More on place and setup for a mobile repair shop

22 pages on this. You are on number 7.

  1. How much rent can a small mobile repair counter afford?
  2. Do I need a mobile repair course first, or can I learn in someone's repair shop?
  3. How do I set up a mobile repair bench: lighting, ESD mat, storage and seating?
  4. Is a repair counter inside a phone seller's shop better than my own mobile repair shop?
  5. How big should a mobile repair shop be, in square feet?
  6. How much does a chip-level mobile repair kit really cost: microscope, hot air and power supply?
  7. Is a 3-month mobile repair course enough to open my own mobile repair shop?
  8. When should I change what my mobile repair shop offers: add accessories, used phones or chip-level work?
All 22 on place and setup →

Reading about it is one thing; doing it in your mobile repair shop is another. If you'd like a hand choosing and setting up the right place, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert