Mobile repair shop · 4 min read

Do I need a hot air station and a microscope to open a mobile repair shop, and when?

The short answer

A budget hot air gun, mostly ₹1,700–5,000 per piece across sellers, is worth buying early because screen and shield work uses it. A trinocular microscope at about ₹16,500–23,000 per piece is not a day-one tool for screens, batteries and ports; buy it when you start board-level work or turn away board jobs often enough to pay for it. A USB camera at about ₹2,700 to ₹3,000 is a stop-gap.

Not sure about your case? Ask an expert, free ↓

What does each tool do for a repair counter?

A phone comes in with a dead charging circuit. Without a microscope you are guessing which of three tiny components failed; with one you can see a lifted pad. That is the difference between a tool you use daily and one that sits under a cloth.

IndiaMART listings, November 2026, before GST and delivery. A listing is a seller's asking price, so get a written quote.
ToolPrice at listingsNeeded forDay one?
Hot air gun, budgetMostly ₹3,500–5,000; ₹1,700–5,000 per piece overallLoosening screens, lifting shields and chipsYes, a budget unit
Hot air rework station, better₹8,000–15,000 (BGA stations up to about ₹40,000)Board-level work with temperature controlNo
Soldering station₹1,999–5,850 per piecePorts, battery connectorsYes
USB microscope cameraAbout ₹2,700–3,000A first look at a board on a screenStop-gap
Trinocular microscope₹16,500–23,000 per pieceSeeing small components, micro-solderingNo
DC power supply₹7,000 per pieceSeeing current drawn by a dead boardBefore board work

When does each one pay for itself?

No source gives owner data on payback for a microscope. What we can do is arithmetic. At the ₹160 contribution per job that our rent sums use, a ₹20,000 microscope needs about 125 jobs to repay itself. Board-level jobs charge more, a project-report range of ₹800 to ₹3,000 and above, so they repay it faster, but no source gives the margin on them. The question is whether you will have enough of those jobs in a year.

One owner in Agartala told a reporter in 2025 that newer phones need specialisation part by part, and that he was unsure he could recover a ₹2–3 lakh chip-level investment. That is the risk: the tool is cheap beside the skill and the jobs it needs. Check yourself against the rule below before buying.

  • Buy the hot air gun when you start doing screens and shields.
  • Buy a USB microscope camera when you want to look at a board and are not sure you will do board work.
  • Buy a trinocular microscope when you have turned away board jobs at least three times in a month and you can do the jobs you would accept.
  • Buy a better rework station when your budget gun cannot hold temperature for the work you do.

What should I check before paying?

  • Ask the seller to power it on, set a temperature and show it holding. Cheap guns drift.
  • For a microscope, look at a board through both eyepieces and the camera port for sharpness and light.
  • Ask for a GST bill and a written warranty. You will need the bill for input credit if you register, and for any complaint.
  • Ask what spares exist: nozzles, heater elements, camera adapters.

Prices and when to buy each tool are also in the table of repair tool prices. The full chip-level set, with its real cost, is in chip-level kit cost.

What usually goes wrong?

  • Buying a microscope because a repair video had one, then using the shop for screens only.
  • A cheap hot air gun overheats a flex cable and ruins a phone you must now pay for.
  • No ESD protection while micro-soldering; static damages chips the customer cannot see.
  • Training too late: the tool is bought, but the technician still cannot read a board.

Training matters as much as tools. See whether a three-month course is enough before you decide how deep to go.

Where do I stand?

Write down the jobs you did last month, and the ones you turned away. If board jobs are on the turned-away list at least three times a month, price a trinocular microscope against that list. If not, buy the hot air gun and a USB camera, and revisit in three months. If you want help sizing the next purchase, tell us where you are.

Questions people ask

Can I repair screens without a hot air gun?

Many jobs, yes. Most counters still buy a budget gun because loosening screens and shields uses it.

Is a USB microscope enough for micro-soldering?

It lets you see the board, but a stereo microscope is easier to work under for long jobs.

Where do I buy a microscope?

Delhi wholesale markets, online tool sellers and IndiaMART dealers. Test it in person if you can.

Where these numbers come from

  1. Hot air rework station: ₹1,700–5,000 per piece (IndiaMART sellers, Nov 2026; budget units mostly ₹3,500-5,000; better units ₹8,000-15,000; multifunction BGA stations up to about ₹40,000). Reported: IndiaMART, SMD rework station listings, checked 14 November 2026.
  2. Trinocular stereo microscope: ₹16,500–23,000 per piece (IndiaMART seller, New Delhi; a USB digital microscope camera is about ₹2,700-3,000). Reported: IndiaMART, SK Telecom (New Delhi), mobile repairing tools listing, checked 14 November 2026.
  3. Soldering station: ₹1,999–5,850 per piece (IndiaMART sellers, New Delhi, Nov 2026). Reported: IndiaMART, SK Telecom (New Delhi), mobile repairing tools listing, checked 14 November 2026.
  4. Adjustable DC power supply, 30 V 5 A: ₹7,000 per piece (IndiaMART seller, New Delhi). Reported: IndiaMART, SK Telecom (New Delhi), mobile repairing tools listing, checked 14 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Place and setup · Mobile repair shop

More on place and setup for a mobile repair shop

22 pages on this. You are on number 4.

  1. What tools does a mobile repair shop need on day one, and what do they cost?
  2. Which market or lane suits a mobile repair counter in India?
  3. Do I need a hot air station and a microscope to open a mobile repair shop, and when?
  4. How much rent can a small mobile repair counter afford?
  5. Do I need a mobile repair course first, or can I learn in someone's repair shop?
  6. How do I set up a mobile repair bench: lighting, ESD mat, storage and seating?
  7. Is a repair counter inside a phone seller's shop better than my own mobile repair shop?
  8. How big should a mobile repair shop be, in square feet?
All 22 on place and setup →

Reading about it is one thing; doing it in your mobile repair shop is another. If you'd like a hand choosing and setting up the right place, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert