Restaurant · Chapter · 7 questions

Setting up the kitchen and dining room

How do I fit out and equip a restaurant without overspending?

The kitchen is the part of a restaurant that is hardest and dearest to change once the tiles are down. This chapter plans the kitchen first (layout, hood, ducting, make-up air and fire safety), then the equipment you really need on day one and what it costs, the grease trap and gas safety, the dining room and seating, how to hire a fit-out contractor and keep the budget from running over, and the two-week checklist before opening. A price reference lists kitchen equipment item by item.

Useful when you want to: start one

  1. 01RestaurantHow do I plan a restaurant kitchen layout and exhaust so it passes inspection?Draw the kitchen first and the dining room around it. Lay it out as a line: receiving, dry and cold stores, prep, the cooking line, the pass and the wash-up, with the dish route never crossing the pass. Over the cooking line put a hood with baffle filters, a duct of airtight, thick metal to open air, make-up air so the burners get air, and fire suppression where the rules ask for it. Fix the exhaust before the tiles go down.
  2. 02RestaurantWhat equipment does a restaurant really need on day one, and what does it cost?Buy in this order: the hood, make-up air and fire safety (hard to retrofit once the tiles are down), then refrigeration, the cooking line for your top dishes, dishwashing, and prep tables and small wares. Most small restaurants buy the core list before day one and add the rest in the first months. Whole kitchens run from Small (20-40 covers) 5-8.4 lakh; 40-cover North Indian with tandoor on LPG 10.5-22.8 lakh, before GST.
  3. 03RestaurantHow much does each piece of restaurant kitchen equipment cost in India?Price ranges for tandoor, fryer, chiller, dishwasher, hood and duct, fire suppression and more, from Indian B2B listings.
  4. 04RestaurantWhat fire safety, grease trap and gas safety does a restaurant kitchen need?A restaurant kitchen needs a fire plan in three parts: stop grease building up (clean filters weekly, ducts and the grease trap on a schedule), stop gas leaking or igniting (commercial cylinders only, a leak detector, shut-off valve, no basement), and be ready for a fire (extinguishers, suppression where the rules ask for it, trained staff). Most kitchen fires involve the hood or ducts.
  5. 05RestaurantHow do I design a restaurant dining room and seating on a budget?Design the dining room for the guests you serve most often: tables for two that push together, a few tables for four, very few for six or more. Spend on what guests touch and see (seats, lights, the entrance and toilets) and save on the ceiling and walls. Interior fit-out runs about 900-1,400 / 1,400-2,200 / 2,200-3,500+ for basic, mid and premium; loose furniture is often left out of the quote.
  6. 06RestaurantHow do I hire a restaurant fit-out contractor and stop the budget running over?Get at least three quotes on the same written scope, and check what each leaves out: kitchen, exhaust, fire safety, air-conditioning, loose furniture, bar and signage are the usual gaps. A quote that excludes three of them is smaller, not cheaper. Keep 8–12% as contingency, pay in stages tied to work done, and have the exhaust route and the fire plan approved before the contractor starts.
  7. 07RestaurantWhat should a restaurant have ready in the last two weeks before opening?In the last two weeks, three things must be done and checked: the paperwork on the wall (FSSAI certificate, GST number on the bill, fire and trade papers, liquor licence if you serve alcohol), the safety checks (gas, fire, water, pest control), and a full dress rehearsal with staff and friends cooking the real menu to real tickets. Open softly, not with a launch day, and keep cash for the weak first months.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert