Stays · 4 min read

Should I put sub-meters on each room, and how do I recover the power bill fairly?

The short answer

Put sub-meters on rooms that have an AC or a geyser, and recover power at actual use above an included amount. Fans and lights can stay in the room rate. Where meters cost too much, charge a fixed monthly amount for AC rooms and review it each summer. Whichever method you use, write it in the agreement before the guest pays, show the reading each month and keep the arithmetic so the guest and you see the same number.

Not sure about your case? Ask an expert, free ↓

The AC left on in an empty room

A guest goes to work at eight and leaves the AC running until six. A month later, the building's power bill has jumped, and the owner divides the extra by the number of rooms. The residents who use the AC sparingly refuse to pay for those who do not. Half the building argues over how a bill was shared, and nobody can show anyone else's use.

Three ways to recover power

MethodHow it worksGood whenWeak when
Included in the rateA fixed room rate covers powerFans and lights only; a simple stayACs or geysers push the bill up in summer
Flat extra chargeA fixed monthly sum for an AC room or a geyserNo meters yet; few AC roomsHeavy users pay the same as light ones; rises need new talks every summer
Sub-meter per roomEach room has its own meter; guest pays for units above an included amountAC rooms and long staysA meter and a reading routine are needed
Prepaid smart sub-meterThe guest recharges; power cuts when credit endsA building with many rooms and a manager who cannot read metersCost, a platform fee and a clear rule for cuts

Costs reported for smart meters: ₹3,950 (single phase), ₹4,900 (two phase), ₹5,950 (three phase) per smart sub-meter with automatic power cut on a due bill, including GST, with ₹75 per meter per month incl. GST a month as a platform fee. For a 40-room building, our arithmetic gives: for 40 rooms: RFID locks ₹1,80,000, fingerprint locks ₹2,79,960, smart sub-meters ₹1,58,000 plus ₹36,000 a year in platform fees. These are one vendor's listed prices, so ask two suppliers for quotes with installation.

What residents pay in practice

A PG operator's guide for Pune reports ₹2,000 to ₹3,000 a month where electricity is billed separately (basis not stated), plus ₹1,500 to ₹2,000 in peak summer months (a PG operator's guide, Pune). A co-living operator's blog reports that per-room metering adds ₹800 to ₹1,500 a month to a resident's power cost in a Hyderabad summer. Both are single sources, but they show the range: most of the difference is the AC in summer.

Where you use a meter, set an included amount that covers fans, lights and a charger, and a per-unit rate no higher than the cost to you, or the rate your state allows. Check your state's rules on charging more than your own tariff to people who stay with you.

Write it down

  • In the agreement or booking terms: how power is charged, the included amount, the rate per unit, when the bill is due.
  • Show the readings at move-in and each month, with a photo.
  • Say what happens on non-payment: a reminder, a due date, and only then a cut, and only if the agreement says so.
  • Give a receipt for every power charge.
  • Reset at move-out: take the reading in the walk-through and settle it before the deposit is returned.

If you are small, if you are large

Small. A flat AC charge is the simplest way to start. Put a sub-meter on the first AC room if disputes begin.

Large. Fit meters on every AC and geyser circuit during the wiring work, keep a monthly reading sheet, and consider prepaid meters for buildings with many rooms.

What usually goes wrong

  • Dividing the total bill equally among rooms.
  • Meters installed but never read or photographed.
  • A per-unit rate far above your own tariff.
  • Cutting power to a guest without notice or an agreement clause.
  • Not recording the reading at move-out, then disputing the deposit.

Apply it to your own case

If you share your building's bills, we can help you pick a method that is fair to guests and recovers your cost.

Questions people ask

Can I charge more than the electricity company charges me?

Rules differ by state about reselling electricity. Check yours before you set a rate above your own tariff.

Are prepaid meters worth it?

For buildings with many AC rooms and no one to read meters, they can be. Compare cost, platform fee and the effect of cutting power.

What if a guest refuses to pay the power charge?

Show the agreement and the reading. Do not cut power without notice and a clause that allows it.

Should fans and lights be metered?

Usually they are included in the rate. Meter the AC and geyser rooms.

Where these numbers come from

  1. Smart PG sub-meter with auto power cut on due bill: single phase / two phase / three phase: ₹3,950 (single phase), ₹4,900 (two phase), ₹5,950 (three phase) per smart sub-meter with automatic power cut on a due bill, including GST (India, vendor Qube). Reported: Qube (sub-meter vendor), Smart PG sub-meter with auto power cut on due bill: single phase / two phase / three phase, checked 14 November 2026.
  2. Monthly platform fee per meter (first 45 days free): ₹75 per meter per month incl. GST (India, vendor Qube). Reported: Qube (sub-meter vendor), Monthly platform fee per meter (first 45 days free), checked 14 November 2026.
  3. Smart lock and meter outlay for a 40-room building: for 40 rooms: RFID locks ₹1,80,000, fingerprint locks ₹2,79,960, smart sub-meters ₹1,58,000 plus ₹36,000 a year in platform fees (any 40-room PG). Ballpark Arithmetic: 40 x 4,500 = 180,000; 40 x 6,999 = 279,960; 40 x 3,950 = 158,000; 40 x 75 x 12 = 36,000. Excludes installation, wiring, gateway and electrician. Assumes one lock and one meter per room
  4. Separate electricity billing in basic and mid PGs; AC adds in summer: ₹2,000 to ₹3,000 a month where electricity is billed separately (basis not stated), plus ₹1,500 to ₹2,000 in peak summer months (a PG operator's guide, Pune) (Pune, PG). Reported: A PG operator's blog (name withheld), Separate electricity billing in basic and mid PGs; AC adds in summer, checked 14 November 2026.
  5. Per-room metering in a Hyderabad summer: per-room metering adds ₹800 to ₹1,500 a month to a resident's power cost in a Hyderabad summer (Telangana, Hyderabad). Reported: A co-living operator's blog (name withheld), Per-room metering in a Hyderabad summer, checked 14 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Operations · Stays

More on operations for a stays

8 pages on this. You are on number 6.

  1. What should I record when someone checks in: ID, address, emergency contact, times?
  2. What fire, gas and wiring checks should I do every month in a stay?
  3. How do I log complaints and promise fix times so small problems do not become reviews?
  4. What do I do when someone staying with me falls sick or has an emergency at night?
  5. How do I run a stay when the water runs short in summer?
  6. Should I put sub-meters on each room, and how do I recover the power bill fairly?
  7. Where can I put CCTV in a stay, where is it banned, and how long do I keep the footage?
  8. A notice or an inspector has arrived at my stay. What do I do first?

Reading about it is one thing; doing it in your stays is another. If you'd like a hand running it smoothly day to day, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Next question · 13 of 15 in The building and its fittingsWhere can I put CCTV in a stay, where is it banned, and how long do I keep the footage? →

Where are you?

One tap, and we point you to the right next step.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert