Restaurant · 5 min read

How big should my restaurant be, and how many seats do I need?

The short answer

Plan on about 21–30 sq ft per seat across the whole unit for casual dining, with kitchen, stores and washrooms taking 30–40% of total area and the dining room the rest. So 1,000 sq ft carpet gives roughly 33 to 48 seats, and 2,000 sq ft gives 70 to 100. Size it by the covers you need to break even, then check which fire, liquor, music and pollution lines the seat count crosses.

Not sure about your case? Ask an expert, free ↓

How do I turn square feet into seats?

The landlord offers 1,200 sq ft. Your cousin, who ate in a 'big' restaurant last week, says that is plenty for 80 seats. Run the ratios before you agree. Two rules of thumb, both for carpet area, do most of the work:

21–30 sq ft per seatWhole-unit area per seat, casual dining

Whole-unit area per seat, kitchen, stores and washrooms included. Quick-service is lower (about 16 to 23) and fine dining higher (about 27 to 35). A rule of thumb, not a legal limit.

India; QSR 16-23, fine 27-35 (kitchen, store and washrooms included) · Source
12–18 sq ft per seatDining area per seat, casual dining

Dining area alone per seat. These ratios come from Delhi NCR planners, and the source says they are not legal limits.

KindDining area per seat, casual dining
Typical12–18 sq ft per seat
Quick-service restaurant or fast casual10–14 sq ft per seat
Fine dining18–24 sq ft per seat
Bar and restaurant12–20 sq ft per seat
Delhi NCR; QSR 10-14, fine dining 18-24, bar or lounge 12-20. A rule of thumb, not a legal limit · Source

To size from the unit: multiply area by the dining share (the rest, 30–40% of total area, goes to kitchen, stores and washrooms; fine dining can run a smaller kitchen share) and divide by the dining area per seat. A planner quoted for Delhi gives 70–100 seats in 2,000 sq ft of casual dining; another source says 70 to 90. As a rough kitchen check, plan about 4–6 sq ft per seat of kitchen (a generic planning rule from a US-origin tool; check it against Indian layouts).

Ask whether the area is carpet or built-up. Leases often quote super area 20 to 40% larger than carpet, so a '1,200 sq ft' unit may be far fewer seats than the arithmetic suggests.

What does the layout need besides seats?

Seats are not the only use of the floor. Count the space for entry and waiting, a cash counter, the service station and pass, washrooms (including a staff one), a bar if planned, and the corridor the staff walk. Reported planning guides suggest leaving walkable aisles between tables, a wider main service aisle, and a mix of table sizes: tables for two that push together, tables for four for families and only a few for six or more. See dining room design for the details.

Start from the kitchen and work outwards: the kitchen is the part that does not move. A 20 to 40 cover kitchen is a small one; the equipment dealers' bands run small, medium and large by covers served. Read the kitchen layout page before you fix the dining area.

How many seats do I need to make money?

Seats are a limit on sales: a room can serve its seats times its table turns. Casual restaurants report table turns reported as Casual 1.5-2.5; fine dining 0.8-1.2; QSR 3.5-6, and weekends carry 70–80% of sales for casual chains. Work it back from break-even: the covers a day you need, divided by the turns you can really get on an ordinary Tuesday, gives the seats you need on a slow day. Then size for the busy day, but do not build for Saturday and carry the rent all week.

Staff scale with seats too: a rule of thumb is: One per 2.5 to 3.5 seats, so a 100-seat place has 30–40 staff. More seats means more payroll before you have more guests. See how many staff a restaurant needs.

Small can be better. A smaller unit with a high bill and a full room on weekdays often makes more than a big one that is a third full. Run the numbers in break-even for two sizes before you decide.

Which rules does my seat count trigger?

Seat counts cross lines that change cost and paperwork. Design the number against all of them before you finalise the plan:

RuleLineWhy it matters
Fire50 persons; lower in some statesA fire NOC and assembly-building rules. See fire NOC
Smoking roomAt least 30 seatsA designated smoking room is allowed only above this size
Pollution categoryWhite up to 100 seats; green 101-200; orange above 200Reported by a compliance site; the official direction was not opened, so confirm with your state board
Liquor fee (Delhi example)Slabs by seating covers: ₹16,39,833–39,70,116 a yearA 46-seat and a 60-seat room can land in different fee bands. See liquor licence
Music licenceFees step by seats and area, for example ₹10,000 a year per outletSee music licences

What changes by type?

A quick-service counter fits more seats per square foot but turns them faster. A thali place packs seats and turns them at lunch. Fine dining spends more floor per guest and turns tables once or less in an evening. A buffet needs a large floor for the food stations. Where your type differs, see the type page, for example fine dining or quick-service. In a hotel, the hotel often decides the seats.

What usually goes wrong

  • Buying a big unit because rent per foot was low, and paying for empty tables on weekdays.
  • Reading a built-up-area quote as carpet and ending up with 20% fewer seats.
  • Packing seats so tightly that servers cannot pass and guests feel crowded.
  • Forgetting the kitchen: too small a kitchen caps the covers no matter how many tables you add.
  • Landing at 46 or 49 seats by accident and then crossing a liquor, fire or music line a few seats later.

Apply it to your own case

Take the carpet area of each shortlisted unit, apply the dining share and the area per seat for your type, and write the seat range. Compare it with the covers you need at break-even and with the lines in the table above. If a unit gives you too few seats to pay its rent, or crosses a line by two seats, tell us the city and the type and we can say how owners usually handle it.

Questions people ask

How many seats can I fit in 1,000 sq ft?

At about 21–30 sq ft per seat across the whole unit for casual dining, roughly 33 to 48, including kitchen, stores and washrooms. A quick-service layout fits more and fine dining fewer.

How big should a restaurant kitchen be?

Kitchens, stores and washrooms together take about 30–40% of total area in a full-service restaurant. Fine dining can use a smaller share. Size it from the menu, not only from a ratio.

Are these ratios legal limits?

No. They are planning rules of thumb; fire, liquor and licensing rules have their own limits, listed above.

Is a bigger restaurant more profitable?

Not automatically. More seats mean more staff and rent before more guests, and weekdays are usually the weak days.

Where these numbers come from

  1. Whole-unit area per seat, casual dining: 21–30 sq ft per seat (India; QSR 16-23, fine 27-35 (kitchen, store and washrooms included)). Reported: Aaditya Interior, restaurant interior cost per sq ft, checked 14 November 2026.
  2. Dining area per seat, casual dining: 12–18 sq ft per seat (Delhi NCR; QSR 10-14, fine dining 18-24, bar or lounge 12-20. A rule of thumb, not a legal limit). Reported: Asaya Interiors, restaurant and cafe interior design, checked 14 November 2026.
  3. Kitchen, stores and washrooms as a share of the area: 30–40% of total area (India full-service restaurants; fine dining up to 25% kitchen). Reported: Panache Architect, restaurant layout planner, checked 14 November 2026.
  4. Seats in a 2,000 sq ft casual restaurant: 70–100 seats (Delhi NCR; another source says 70-90). Reported: Panache Architect, restaurant layout planner, checked 14 November 2026.
  5. Kitchen area per dining seat: 4–6 sq ft per seat (Generic planning rule from a US-origin tool; check against Indian layouts). Ballpark foodservicenerd.com kitchen size and seating planner says about 4 to 6 sq ft of kitchen per dining seat. US-origin rule of thumb, not Indian data.
  6. Table turns a day: Casual 1.5-2.5; fine dining 0.8-1.2; QSR 3.5-6 (India; software vendor tool page. A 2023 brokerage table gives an industry average of about 1.3). Reported: RestaurantDaily, table turnover tool, checked 14 November 2026.
  7. Weekend share of sales for casual dining: 70–80% of sales (India casual dining chain restaurants, 2023). Reported: Nuvama Wealth, casual dining sector research (January 2023), checked 14 November 2026.
  8. Staff per seat, full-service restaurant: One per 2.5 to 3.5 seats (India; fine dining at the low ratio, casual at the high; 100 seats means 30-40 staff, kitchen 40-45% of headcount, service 35-40%). Reported: Table and Fork, restaurant staffing plan India (27 October 2026), checked 14 November 2026.
  9. Staff in a 100-seat full-service restaurant: 30–40 staff (India). Reported: Table and Fork, restaurant staffing plan India (27 October 2026), checked 14 November 2026.
  10. People at which a restaurant is treated as an assembly building for fire rules: 50 persons (India under the 2026 building code (Group D); states differ). Reported: Flamekite, fire NOC for restaurants (cites the 2026 National Building Code, BIS SP 7:2026 Group D), checked 14 November 2026.
  11. Smoking room allowed in a restaurant of at least: 30 seats (India, COTPA 2003 section 4 proviso). Official source: COTPA 2003 section 4, indiacode copy, checked 14 November 2026.
  12. Pollution control category of a restaurant by seats: White up to 100 seats; green 101-200; orange above 200 (India, CPCB direction of 20 July 2026 as reproduced by a compliance site; the official direction was not opened). Reported: Corpseed, CPCB pollution categories for hotels, restaurants and banquet halls (2026), checked 14 November 2026.
  13. Delhi restaurant liquor licence L-17, by seating covers: ₹16,39,833–39,70,116 a year (Delhi, 2026-27 excise year: up to 50 / 100 / 200 / above 200 covers; late renewal adds 25% in March, 100% from 1 April). Official source: Delhi Excise, renewal circular for L-17, L-18 and L-19 (Feb 2026), checked 14 November 2026.
  14. PPL music licence, standalone restaurant without alcohol, below 20 seats, A-class city: ₹10,000 a year per outlet (India, A-class cities; 21-40 seats 17,500; 41-60 seats 20,000; ₹300 per seat above 60. B-class cities 6,000 / 10,500 / 12,000 / ₹180 a seat; other cities 5,000 / 8,750 / 10,000 / ₹150 a seat). Reported: PPL India tariff, Category 15: restaurants, cafes and similar premises (in force from 14 November 2025), checked 14 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Place and setup · Restaurant

More on place and setup for a restaurant

14 pages on this. You are on number 7.

  1. How do I judge footfall, catchment and competitors for a restaurant before I sign?
  2. How much restaurant kitchen equipment costs in India, item by item
  3. How big should my restaurant be, and how many seats do I need?
  4. What fire safety, grease trap and gas safety does a restaurant kitchen need?
  5. How do I design a restaurant dining room and seating on a budget?
  6. How much rent can a restaurant afford for its expected sales?
  7. How do I hire a restaurant fit-out contractor and stop the budget running over?
  8. What should a property have to work as a restaurant: exhaust, water, drainage, power, gas and washrooms?
All 14 on place and setup →

Reading about it is one thing; doing it in your restaurant is another. If you'd like a hand choosing and setting up the right place, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert