Find a contract unit in the cluster that already makes your garment type, ask for a paid sample before any promise, and visit the floor. Buy fabric separately from a stock seller or mill agent, or ask the unit to source it and accept a margin for the convenience. Never let one tailor or one unit be your only route to market.
Small labels get three kinds of supplier mixed up: the fabric seller, the cut-make-trim (CMT) or job-work unit that cuts and stitches, and the full-package manufacturer that sources fabric and does everything for a higher price and higher minimums. Knowing which you are talking to explains most price and quality surprises.
Who actually makes what, and where
Indian apparel is clustered by product. Using the right cluster saves you from a unit that can stitch a tee but not a lined jacket.
| Product | Clusters people usually look at | What to know |
|---|---|---|
| Cotton knits: tees, polos, joggers, kidswear | Tiruppur (Tamil Nadu), also Kolkata and Ludhiana | Strong in knits and exports; many units prefer repeat orders but some take small brands through merchandising agents |
| Winterwear: hoodies, sweatshirts, knitwear | Ludhiana (Punjab), Delhi NCR units | Fleece and knit sourcing is local; lead times lengthen before the cold season as units fill up |
| Shirts, trousers, wovens | Bengaluru, Delhi NCR, Mumbai, Kolkata | Wovens need more operations per piece than knits, so MOQ per style tends to be higher |
| Kurtas, ethnic, block print, hand-work | Jaipur and the printing villages near it, Lucknow for chikankari, Kolkata, Surat | Often a karigar or a hand-work contractor handles one step; ask who does the embroidery or printing, not just who stitches |
| Fabric (synthetics, blends, viscose, georgette) | Surat, the large textile markets of Delhi, Mumbai and Kolkata | Shops sell by the metre and by the roll; ask for a swatch and a bulk-lot swatch before paying |
| Denim | Ahmedabad and Bengaluru clusters, with washing units around them | Washing and finishing is a separate vendor; denim brands carry more QC risk |
Most cities also have local sources: a garment unit in a lane near you, a tailor's workshop with 6–15 machines, or a boutique's production contractor. These are good for fitting trials and short runs but check capacity and consistency before sizing up.
How to find them without being cheated
- Trade-linked marketplaces and directories. B2B sourcing portals such as IndiaMART list contract manufacturers, but listings are self-declared, so treat them as a way to find names, not proof of quality.
- Cluster visits. Two days in Tiruppur or Ludhiana will teach you more than twenty phone calls. Take your tech pack and a reference garment you like.
- Fabric-market walkthroughs. Textile markets, such as Surat's large trading hubs, Delhi's Chandni Chowk fabric lanes or Kolkata's Burrabazar, let you touch hundreds of swatches in a day.
- Small-brand referrals. Other founders in your niche will often tell you which unit delivers on time. Ask in founder communities and at fashion exhibitions.
- Textile and apparel trade fairs and associations. Fairs and local manufacturer associations are where reputable units show up; ask for the association's member list.
- Pattern-making and tailoring schools. Fashion institutes often have faculty who freelance as pattern masters and know local units.
Always arrive with a tech pack, a reference piece and a written quantity per size. A unit quoting without seeing a tech pack is quoting a guess, and the price will rise on the second call.
Vetting: one paid sample, one factory visit
Use the same test for every shortlist. It costs little and it filters out almost every unit that would have hurt you later.
- Send an identical tech pack to three units and ask for a priced quote with minimums, sampling charges and lead times.
- Order one fit sample from each, paid, in your actual fabric. Compare measurements against your size chart with a tape, and note stitch quality, loose threads, label position and pressing.
- Wash one piece three times and look for shrinkage, twisting seams and colour change.
- Visit the floor. Look for working machines, an inspection table, a cutting area that is not chaos, and how finished goods are stored.
- Ask for a small brand they currently work with and call them, or ask to see a repeat order.
- Place a small paid trial order (50–100 pieces) before any large batch, even if that costs more per piece.
If a unit refuses a visit, will not sample before taking an advance, or cannot say who owns the cutting and stitching, treat that as an answer.
Terms: MOQ, payment and lead time
| Term | Typical for a small label (estimate) | Negotiate |
|---|---|---|
| Minimum order per style | 50–300 pieces for CMT units; 500–1,000+ for full-package or export units | A smaller first run at a slightly higher per-piece rate, with a commitment to reorder winners |
| Advance | 30–50% on order, balance before dispatch | Pay against a pre-production sample and a signed PO, not on a verbal promise |
| Sampling charge | ₹800–3,500 per sample, sometimes adjusted into the bulk order | Ask for adjustment if bulk is placed within a month |
| Lead time | 3–6 weeks for a basic CMT run after fabric and trims arrive; longer around festival and winter peaks | Quote a date in writing and add buffer before your launch |
| Credit | Rare for a new label; some fabric sellers give 15–30 days after a few repeat orders | Build a record with small, paid-on-time orders first |
| Defect and shortage policy | Often unwritten | Write a purchase order with agreed tolerances for measurements, shade and defective pieces |
Put the agreement on a purchase order: style code, fabric, quantity per size, unit price, delivery date, payment schedule and who bears the cost of rework. For a larger deal, have a lawyer draft a short manufacturing agreement with confidentiality on your designs. This guide is general information, not legal advice, and we have not verified any specific contract template.
Fabric payments usually go with the order. Ask about GST on the supplier's bill and whether the fabric invoice and the job-work invoice are separate; your CA should tell you how input credit works for your registration. Garment GST slabs depend on the price of each piece, so confirm the current rate before you set prices.
Quality checks on every batch
- Before cutting: check that the fabric received matches the approved swatch for shade, GSM and width, and test a piece for shrinkage.
- During production: ask for photos or a quick visit after the first 10 pieces come off the line (an early check catches a wrong stitch or a wrong label placement before 300 pieces are made).
- Before dispatch: count pieces per size, measure 5–10 pieces per size against your chart, and sample-check seams, labels, buttons and finishing. Many factories use an acceptable quality limit (AQL) sampling plan; ask your unit which one it uses.
- On receiving: open one carton from each lot, check the barcode and size labels, and photograph the cartons for any claim.
- Record defects: keep a sheet of fault type per unit and batch. After three batches you will know which unit to promote and which to drop.
Quality checks cost time, not money. If you cannot visit, hire a freelance quality inspector for a few hundred to a couple of thousand rupees per inspection, as an estimate.
Backups, red flags and keeping your designs yours
Keep at least two units qualified, even if the second gets one small order a quarter. When one unit is full for Diwali or the winter peak, the other keeps your launch on time. Split fabric suppliers too: if one shade is discontinued mid-drop you need an alternative.
- Red flags: a price far below others (usually a cheaper fabric or a missing step), refusal to share a floor video, no GST invoice, pressure to pay the full amount upfront, reluctance to give a written delivery date, or samples that are much better than the bulk.
- Your designs: share the tech pack only after a confidentiality note, number your sample pieces, and keep print screens or embroidery files in your own control where possible. A copycat can still happen, so build the brand and customer base alongside.
- Dispatch partners: line up your courier and reverse-pickup partner now, because the returns policy depends on it. See the boutique and D2C brand playbooks for the neighbouring decisions.
Related reading: what to buy to start a clothing brand, the main clothing brand playbook, and, once you sell in volume, GST billing software to keep job-work and fabric invoices straight.
More on starting a clothing brand
- Start hereThe full playbook →Models, licences, startup costs and the steps to your first customer.
- Go deeperWhat to buy →Sampling, fabric, trims, labels, packaging and a shoot kit, costed, plus what not to buy yet.
- Go deeperGetting customers →Drops, content, pre-orders, launch pricing and how to keep returns and COD refusals down.
Questions people ask
What is a cut-make-trim unit and how is it different from a manufacturer?
A cut-make-trim (CMT) unit cuts and stitches fabric that you supply, and adds trims, for a per-piece charge. A full-package manufacturer also sources the fabric and trims, so it quotes a higher price and a higher minimum. Small labels often start with CMT because the minimums are lower and they control the fabric.
What minimum order quantity should I expect from a garment manufacturer?
As an estimate, 50–300 pieces per style for small CMT units, and several hundred to a thousand or more for export-oriented or full-package manufacturers. Smaller runs usually cost more per piece. Ask for a higher rate on a first batch of 50–100 in return for a commitment to reorder winners.
How do I check the quality of a manufacturer before ordering?
Order a paid fit sample from each shortlisted unit, compare it to your size chart, wash it three times, and visit the floor if you can. Then place a small trial order before a large batch. Refusing a visit or a sample before an advance is a warning sign.
Should I pay a manufacturer the full amount in advance?
Avoid paying everything upfront. A common pattern is 30–50% on a written purchase order and the balance before dispatch, after you have signed off a pre-production sample. Full advance leaves you with no leverage if the batch comes back wrong or late.
Where can I buy fabric for a small clothing brand?
Wholesale textile markets and mill agents are the usual sources: Surat for synthetics and blends, the large fabric lanes in Delhi, Mumbai and Kolkata, and knit fabric through Tiruppur or Ludhiana dealers. Ask for a swatch, then a bulk-lot swatch, and test shrinkage and colour before buying a roll.
