Buy in this order: the base vehicle, a body built to a layout drawn around your menu, safe gas and power, then the cooking line. Everything that touches the road (chassis, weight, wiring, gas fittings) comes before anything customers see. The wrap, lights and a printed menu come last.
As a ballpark, a second-hand pickup fitted as a basic kitchen runs about ₹6–12 lakh, a new small commercial vehicle with a proper stainless body ₹12–25 lakh, and a handcart or tricycle stall ₹40,000–1.5 lakh. The expensive mistakes are a vehicle too small for the cook line, a generator too loud for the spot, and a body the transport office will not endorse.
Pick the base vehicle by weight and cook line, not by looks
A kitchen is heavy: stainless counters, two water tanks of 40–60 litres each, a gas cylinder, a fridge, a generator and two or three people. Add that to the vehicle and you can overload the axle without noticing. Start from your menu, list the equipment, and then choose a chassis whose rated payload clears the total with margin.
| Base | Typical examples | Fits | Watch for |
|---|---|---|---|
| Handcart, bicycle or e-tricycle | Locally fabricated carts, battery tricycles | Chai, sandwich, momo, juice, one-burner menus | Needs a place to store it overnight; vending zone rules often treat it as a street vendor, which can be easier than a truck |
| Three-wheeler cargo | Piaggio Ape-type cargo loaders, Bajaj and Mahindra three-wheeler loaders | Compact two-person window with a short menu | Very little weight margin; no standing room; check the state's rules on converting a goods three-wheeler |
| Mini pickup | Tata Ace class, Maruti Super Carry class, Mahindra small pickups | The common first truck: burger, roll, dosa, fried snacks | Rear loading height, payload, and a body so tall it hurts stability on bad roads |
| 1.5–2 tonne pickup or light truck | Mahindra Bolero Pickup class, Tata 407 class, Eicher light trucks | Two-cook line, fridge plus freezer, walk-in standing space | Parking and turning in lanes; higher fuel cost; a larger vehicle may need a heavy-vehicle licence, so check with the RTO |
| Converted van or minibus | Traveller-type vans, retired buses | Seating pods, bar-style sit-in trucks | Structural cutting is the hardest approval to get; ask before you buy |
A second-hand chassis saves lakhs, but ask for the registration class, fitness validity and any hypothecation. A goods vehicle registered for another use may not be convertible in your state, and some cities have written rules against it. Buying a vehicle that has already been converted legally, with the body entry on its registration certificate, can be cheaper than doing it yourself.
The body: layout, surfaces and the things that fail on the road
Have the fabricator draw the interior to scale and walk your cook through it before any cutting. The service window sits at counter height, usually 1–1.1 m from the ground; the cook line runs along the opposite wall from the hand-wash sink; and the fridge sits away from the burners. A good layout lets one person pivot between fryer, griddle and window without a step.
- Surfaces: stainless steel (commonly grade 304) for counters and the wall behind burners; anything porous or flaking fails basic food-safety expectations and is hard to clean.
- Exhaust: a canopy hood with a grease filter and a fan above the burners. Without it, a griddle in a closed body is unbearable by evening and grease coats the roof lining.
- Floor: anti-slip, sealed, with a slight fall to a drain or tank so washing water does not pool and slosh in turns.
- Window and shutter: a lift-up awning that doubles as rain cover, with mosquito mesh on any opening you leave open while cooking.
- Mounting: every appliance bolted or strapped down. A loose fryer or a cylinder that moves in a braking stop is how serious accidents happen.
- Wiring: a separate marked electrical board, correctly rated cable, an earthing point and a cut-off switch within reach of the cook.
Budget roughly ₹2–4 lakh for a basic body on a mini pickup and ₹5–10 lakh for a fuller stainless build with canopy, wiring and plumbing, as estimates. Ask your fabricator which transport authority approval and workshop certificate they will give you in writing, and who attends the RTO inspection.
Body alteration usually needs prior permission from the registering transport authority and an endorsement on the registration certificate (Section 52 of the Motor Vehicles Act deals with alterations). Procedure and forms differ by state. Check with your RTO before you cut metal. This is not legal advice.
The cooking line, by what you actually sell
Buy the equipment for your menu and nothing else. A five-item menu should need no more than three heat sources. Commercial stainless equipment from kitchen dealers is sturdier, but a truck is also weight and gas budget, so compact gear matters.
| Menu type | Core equipment | Estimated cost | What goes wrong |
|---|---|---|---|
| Burgers, wraps, rolls, sandwiches | Flat griddle, bun toaster, small fryer, under-counter fridge | ₹70,000–2 lakh | Griddle too small for peak orders; patties stacked up and cold |
| Dosa, uttapam, South Indian | Dosa tawa (gas), batter grinder at base, chutney containers, two-burner stove | ₹40,000–1.2 lakh | Batter souring in heat; a tawa that heats unevenly on a gas ring |
| Momos, steamed snacks | Multi-tier steamer, gas burner, chutney station, hot-holding box | ₹30,000–90,000 | Steamer boiling dry; water use higher than expected |
| Fried snacks, fries, chaat | Twin-basket gas fryer, oil strainer, holding rack | ₹50,000–1.5 lakh | Hot-oil spills in transit; oil changed too rarely |
| Chai, coffee, cold drinks | Burner, kettle, flasks, small ice chest or bottle cooler | ₹20,000–80,000 | Milk spoiling without proper cold storage |
| Biryani, rice and curry boxes | Base-kitchen cooking, hot-holding cabinet, gas ring for finishing | ₹50,000–1.5 lakh | Food held too long at warm temperatures; boxes sealed while steaming |
Notice the pattern: the dishes that cook to order in a minute or two are what a truck does best. Anything that needs long simmering, soaking or batch prep belongs in the base kitchen. That one split decides how much you buy for the truck.
Gas, power and water: the three systems that stop service
Gas. Trucks normally run commercial LPG in 19 kg cylinders bought through an oil-marketing company dealer (IndianOil, Bharat Gas and HP Gas are the major ones). Use a certified regulator, a braided or suitable high-pressure hose, and burners with flame-failure protection where you can. Keep the cylinder in a vented, external or isolated compartment, never beside the generator or fryer. Using domestic subsidised cylinders commercially is not allowed; confirm the current rule with your dealer.
Power. You need electricity for the fridge, lights, exhaust fan, billing and a phone charger. Options are a portable silent inverter generator (about 2–3 kVA, often Honda, Kirloskar, Yamaha or Ronin-type models), a battery-and-inverter setup charged while driving, or a mains hookup where the landowner allows it. Generators need exhaust directed away from customers and food, and spots in residential areas or malls often ban noisy ones.
Water. Plan a fresh-water tank, a hand-wash sink with a tap, a grey-water tank that is larger than the fresh tank, and drinking water for the crew. Carry-away grey water is the rule; draining on the road is what turns neighbours into complainants.
| System | Starter option | Estimated cost | Upgrade later |
|---|---|---|---|
| Gas | Two 19 kg cylinders, regulator, hose, leak detector, extinguisher | ₹12,000–25,000 plus deposit | Fixed piped manifold, automatic cut-off |
| Power | 2 kVA silent inverter generator | ₹45,000–1.2 lakh | Battery bank plus inverter for quiet service |
| Water | Two 40–60 L fresh tanks, 80–100 L grey tank, hand pump or electric pump | ₹10,000–30,000 | Heated water, larger tanks, filtration |
Cold storage, holding and the pantry
A truck cannot keep much stock cold, and heat is the enemy of every perishable on board. An under-counter fridge of 150–250 litres (₹18,000–45,000, estimate) holds the day's sauces, dairy, cut vegetables and proteins. A small chest freezer or ice box handles frozen patties or momos. Add food-grade containers that stack, a thermometer in every cold unit and a written time-and-temperature routine.
- Pre-portion at base: marinated and weighed portions in labelled boxes, so the truck only finishes and serves.
- Hot holding: a bain-marie or hot box for items that must stay hot, with a limit on how many minutes they may sit.
- Dry stock: sealed bins above the floor, with silica or dry rice sachets for humidity in the monsoon.
- Waste: a lidded bin inside and a bag outside for customers, emptied at every close.
Must-have on day one, later, and not yet
| Bucket | Items | Why |
|---|---|---|
| Day one | Registered vehicle with body endorsement, insurance, safe gas and wiring, extinguishers, hand-wash sink, cooking line for 3–5 dishes, one fridge, UPI QR, FSSAI display | The truck cannot stand or sell legally and safely without them |
| First six months | Second fryer or griddle, token printer, awning and folding queue rail, extra generator or battery, branded packaging, a second set of gas cylinders | Added once you know your peak and your bottleneck |
| Not yet | Full-body vinyl wrap beyond a simple print, LED screens, big sound system, a second truck, a huge menu board, expensive coffee machine for a snack menu | None of these fix speed or footfall; a second spot or a better window does |
Rent, lease or buy, and a cart as a test
Several routes cost far less than building from zero. Some food-truck fabricators and event operators rent out a ready truck by the day or the month; that is an easy way to test a spot for a season before you commit lakhs. A battery-powered cart or a rented stall at a market tests the menu even cheaper, with no vehicle paperwork.
- Rent a ready truck for a trial: check who holds the permits, who pays for breakdowns and what happens if the spot is refused.
- Buy second-hand from a closed operator: inspect the body endorsement, fitness certificate and electrical work, and have a mechanic examine the chassis.
- Equipment on instalments or a small business loan: read the total interest, and keep one month of payments in reserve for slow weeks. See our wider playbook for the full launch budget.
Whatever you choose, plan the spot and the menu before the metal: see getting customers for a food truck for how to count footfall and pick a menu that suits it, and finding suppliers for where to source the vehicle, body and gas.
Paying for it
More on starting a food truck
- Start hereThe full playbook →Models, licences, startup costs and the steps to your first customer.
- Go deeperGetting customers →Count footfall, build a speed-first menu, pitch events and campuses, and turn a spot into regulars.
- Go deeperFinding suppliers →Vehicle, body builder, gas, commissary, produce and packaging: where to find each and how to vet them.
Questions people ask
Which vehicle is best to convert into a food truck in India?
A mini pickup of the Tata Ace or Mahindra Bolero Pickup class is the usual first choice, because the payload, spares and mechanics are everywhere. Pick the smallest chassis whose payload clears your equipment, water and crew with margin. A goods vehicle may or may not be convertible in your state, so check with the RTO first.
Can I use a domestic LPG cylinder in a food truck?
No, commercial cooking should run on commercial cylinders, usually 19 kg, supplied through an oil-marketing company dealer. Using subsidised domestic cylinders for business is restricted. Confirm the current rule and connection process with your gas dealer, and fit a proper regulator, hose, vented compartment and extinguisher.
What generator do I need for a food truck?
A silent inverter generator of roughly 2–3 kVA is the usual size for a fridge, lights, exhaust fan and billing, while an induction cooktop or air conditioner needs more. Add up every appliance's watts, leave margin, and check whether your spot, mall or housing society allows generators at all. Some owners add a battery and inverter for silent service.
How much does a fitted food truck cost?
As ballpark estimates, about ₹6–12 lakh for a second-hand mini pickup with a basic kitchen and ₹12–25 lakh for a new small vehicle with a stainless body. Bigger builds with fuller equipment go higher. A handcart or e-tricycle stall is ₹40,000–1.5 lakh. Get written quotes from at least three fabricators with a layout drawing.
Can I start with a cart first?
Yes, and for many menus it is the smarter test. A cart or stall lets you prove price, speed and spot for a fraction of the cost and with simpler paperwork. Vending rules for carts usually fall under street-vending schemes, which differ by city, so ask the municipal office what a cart needs before you build one.