Buy the floor, the racks and the cardio line first, and buy less machine variety than the brochure suggests. Members queue for treadmills, a squat rack and dumbbells at 7 am; they rarely queue for the seventeenth selectorised machine. A sound shell (flooring, power, ventilation, lockers) matters more than the badge on the equipment.
As a ballpark, a 1,500 sq ft functional studio can be equipped for roughly ₹8–20 lakh and a 4,000 sq ft full-floor gym for ₹40 lakh or more, before rent deposit. The rest of this page is about where that goes, what to buy second-hand, and what to leave for month six. The wider picture is in the gym starting guide.
Plan the floor in zones before you price anything
Equipment lists go wrong when they are written before a floor plan. Draw the room to scale, mark pillars, doors and the load-bearing walls, and allot zones. A common split on a general floor is roughly a third for cardio, a third for free weights and racks, and a third for machines, stretching and a functional corner. Studios invert this: most of the floor is open turf and rig, with a small cardio row.
- Walking clearance. Leave about a metre behind a loaded barbell and more around a deadlift platform. A crowded floor is also an injury and complaint risk.
- Noise and drop zone. Dropped plates travel through a slab. Keep the deadlift and Olympic-lifting area away from shared walls and anything below, and put it on a thick rubber or timber-and-rubber platform.
- Ground floor wins for heavy kit. Treadmills, racks and a full dumbbell wall add up to tonnes. On an upper floor, ask a structural engineer whether the slab can carry it; do not guess.
- Mirror walls. Place them along free-weight and dumbbell zones so members can check form; cardio can face a window or TVs.
Slab loading, fire norms and electrical load are building-specific. Ask a structural engineer and an electrician to sign off the plan; this page is general guidance, not engineering advice.
Cardio: the line that members notice first
Cardio gets used by new members and by everyone on a rainy day, so it wears out first. Commercial-grade treadmills use bigger motors rated for continuous duty, thicker decks and sturdier frames; light 'home use' machines break within a year on a busy floor and the warranty usually excludes commercial use.
| Item | Estimated cost each | What to check |
|---|---|---|
| Commercial treadmill | ₹1.2–3.5 lakh | Continuous-duty motor rating (check HP), deck thickness, belt width, incline range, and who services it in your city |
| Upright and spin bikes | ₹30,000–1.2 lakh | Flywheel weight, smooth belt or chain drive, adjustable seat for short and tall riders |
| Cross trainer (elliptical) | ₹80,000–2.5 lakh | Stride length and a stable frame; wobble is the first complaint |
| Air bike or rower | ₹40,000–1.8 lakh | Popular for conditioning; fewer electronics to fail |
| Stair climber or ski-erg (later) | ₹1–3 lakh | Add once the basics are full at peak hours |
A starter ratio many floors use is roughly one cardio machine for every eight to ten members expected at peak hour, and no more than four or five treadmills on a studio floor. Check yours against your own peak-hour count after three months rather than copying a rule.
Treadmills need a clean, dedicated electrical line, proper earthing and often a voltage stabiliser. Dust, humidity and voltage dips kill motor control boards; ask the electrician about a dedicated circuit and an overall earthing check before the machines arrive. Belt lubrication and deck cleaning is a scheduled job, not a repair.
Strength: racks, bars, plates and dumbbells
Strength is where a smaller floor can look big. Racks, benches, dumbbells and a few good bars serve the widest range of members, from a first-timer doing goblet squats to a powerlifter. Machines help beginners and older members, but each one serves one movement.
| Item | Estimated cost | Buy now or later |
|---|---|---|
| Power or squat rack with safety arms and pull-up bar | ₹40,000–1.2 lakh each | Two on day one for a 100-member gym; add as peak-hour queues grow |
| Olympic barbell, 20 kg men's, with a 15 kg women's bar or two | ₹8,000–25,000 per bar | Buy better bars than plates: a poor bar bends and rotates badly |
| Plates: iron or rubber-coated or bumper, per kg | ₹150–450/kg depending on type | Start with ~300–500 kg total; add as lifters get stronger |
| Dumbbell set, hex or rubber-coated, 2.5 kg to 40 kg with rack | ₹1.5–4 lakh for a full wall | Day one; add heavier pairs only if members ask |
| Adjustable benches, flat and incline | ₹10,000–35,000 each | Four to six; the adjustable ones get used most |
| Selectorised machines (leg press, lat pulldown, chest press, leg curl) | ₹60,000–2.5 lakh each | Buy three or four of the most-used; others can wait |
| Cable crossover or functional trainer | ₹1.2–3.5 lakh | Useful as one flexible station; one is enough at first |
| Kettlebells, medicine balls, resistance bands, TRX-type straps, sleds | ₹30,000–1.2 lakh for a studio set | Cheap, high use; core of any functional studio |
- Rubber over iron for plates. Bumper plates save floors and ears; iron is cheaper and fine on a platform.
- Check bar spec. Ask for the tensile strength, the sleeve rotation (bearings or bushings) and the knurling; a bar that sticks or bends is a safety issue.
- Collars and clips. Buy spring collars or lock-jaw collars in bulk; they disappear.
- Machine upholstery. Sweat cracks cheap vinyl in a year; ask what the cover material is and whether replacement pads are sold.
The shell: flooring, air, power, lockers and the unglamorous basics
The shell is what a member experiences even if they never touch a bar: whether the floor smells, whether the air is breathable at 8 pm, whether there is a locker that locks. It is also where a gym leaks money if done cheaply, because a bad floor cracks in a year and bad ventilation costs members.
| Item | Estimated cost | Watch for |
|---|---|---|
| Rubber flooring: rolls or 15–20 mm tiles for the weights zone | ₹80–220 per sq ft | Dense rubber, not recycled crumb that sheds; ask for a sample and a thickness test |
| Interlocking PVC or vinyl for the cardio and stretching area | ₹60–150 per sq ft | Needs a level floor; moisture under tiles causes lifting |
| Mirrors, toughened or laminated, with safety film | ₹60,000–2 lakh | Mounted off the floor; weights will hit them |
| Split ACs or ducted cooling, exhaust fans and fresh-air fans | ₹2–10 lakh | Hot, humid air is a common reason for churn; plan fresh-air exchange, not just cooling |
| Dedicated power, MCBs, stabilisers, earthing | ₹50,000–2 lakh | Treadmills and AC on one overloaded line trip at 7 am |
| Lockers: powder-coated steel, one per ~2 members at peak | ₹3,000–6,000 per locker | Lockable doors with members' own locks; a door that jams is a daily complaint |
| Changing rooms, showers, geyser and drainage | ₹3–12 lakh | Women's changing room needs privacy and a proper door, not a curtain |
| Drinking water: RO plus a cold dispenser | ₹15,000–60,000 | Members fill bottles all day; servicing schedule matters |
| CCTV on the floor and entrance, access control | ₹40,000–2 lakh | Never inside changing areas; check local rules on recording |
| Sound system and TVs | ₹40,000–2 lakh | Music needs a licence from copyright societies; confirm with the relevant bodies |
| First-aid kit, AED if budgeted, fire extinguishers, signage | ₹20,000–2 lakh | Extinguishers need dated servicing; check fire rules locally |
Of everything here, ventilation and flooring have the best return. A gym with fresh air and a clean rubber floor feels premium at half the price of fancy lighting. Washrooms are the other silent factor: women members notice cleanliness first and tell their friends.
New, second-hand, leased: how to buy the big items
A commercial gym's equipment is its largest cost and loses value quickly. How you buy it matters more than the badge on the weight stack.
| Route | Typical use | Risks |
|---|---|---|
| New from a manufacturer or authorised dealer | Cardio, selectorised machines and anything with a motor | Price is high; check commercial warranty, who services in your city and the spare-parts lead time |
| Second-hand from a closing gym or a dealer's refurbished stock | Racks, benches, plates, dumbbells, and sometimes older selectorised machines | Hidden wear in cables, bearings and motors; ask to see it run under load and check for bent frames |
| Lease or EMI from the dealer or a lender | A full cardio line when cash is tight | Total cost is higher; read the penalty and ownership terms before you sign |
| Custom-fabricated racks, benches and platforms from a local workshop | Racks, platforms, storage and functional rigs | Weld and steel gauge quality vary; ask to see a rig they built and load it |
- Buy motors new, buy metal second-hand. A used treadmill may hide a tired motor; a used rack has nothing to hide.
- Ask for a service contract in writing before you pay. Annual maintenance contracts commonly cost somewhere around 5–10% of equipment value a year; confirm what is covered and the response time.
- Keep spare parts. Treadmill belts, console keys, cable ends and bench pads are the usual failures; a short list of spares avoids a machine idling for three weeks.
- Check delivery and installation. Heavy equipment needs a lift or a crane-equipped truck; a quote that skips this is not final.
- Compare at an equipment hub. Cities with large equipment dealerships, such as Delhi NCR, Mumbai and Bengaluru, let you see machines side by side; use them to compare, not to rush a deal.
Brand and dealer names are for you to shortlist locally. Ask for a reference gym that has run the same machines for two years, and visit it at peak hour.
What not to buy yet, and what to hold in reserve
- A full machine line-up. Pick the three or four machines members actually reach for; a duplicate leg-extension machine is dead capital.
- Smart screens, app-linked cardio and VR rigs. Members care more that the treadmill is free than that it streams a class.
- A second cardio line, a sauna or a steam room. These need plumbing, power and cleaning; add after a year if members ask and you can price it as a paid extra.
- Branded merchandise in bulk. Order small, and only after you know your sizes and who will actually wear it.
- Supplement stock. If you sell protein, take small consignments from a distributor and check batch, expiry and labelling; do not tie up capital in cartons.
- Body-composition scanners, unless someone will use them to coach. A scanner nobody interprets becomes an ornament.
Keep roughly 10–15% of the equipment budget in reserve for the second quarter. By then you will know whether members want more squat racks, more dumbbells or more mat space, and the right answer is rarely what the plan said.
In the gym library
More on starting a gym
- Start hereThe full playbook →Models, licences, startup costs and the steps to your first customer.
- Go deeperWho to hire →Trainers, front desk and housekeeping in order, with pay, vetting and PT revenue-share terms.
- Go deeperGetting customers →Pre-sales, local channels, trial passes, pricing and the follow-ups that stop members drifting.
Questions people ask
How much equipment does a 1,500 sq ft gym need?
As a rough guide, one or two racks, a dumbbell wall, four to six benches, a handful of machines and four to six cardio units fit comfortably, leaving room for stretching and a functional corner. The exact mix depends on your members and peak-hour traffic, so plan from the floor plan and a short list of what members will use, not from a catalogue.
Should I buy commercial or home-use gym equipment?
Commercial equipment is the safer choice for anything members use daily. Home-use treadmills and benches are built for an hour or two a day and tend to fail on a busy floor, often with warranties that exclude commercial use. If budget forces a choice, buy commercial cardio and racks and go lighter on accessories.
Is second-hand gym equipment worth buying?
Yes for simple metal items such as racks, benches, plates and dumbbells, which wear slowly and are easy to inspect. Be careful with motors, electronics and cables, where hidden wear shows up months later. Always ask to see used machines run under load, check frames for bends or cracks, and keep the bill.
What flooring should a gym use?
Use dense rubber flooring in the weights area, because it absorbs drops and protects the slab, and interlocking tiles or vinyl in cardio and stretching zones. Thin mats over tile are the classic false economy. Ask for samples, check thickness and density, and confirm how the installer deals with moisture and an uneven slab.
Do I need an annual maintenance contract?
Usually yes for cardio and selectorised machines, because a broken treadmill costs you members as well as a repair bill. Contracts commonly run a single-digit percentage of equipment value per year; confirm what is covered, how fast a technician comes and whether parts are included. Simple racks and plates do not need one.
