Start with GST billing software that handles unit conversions (piece, box, kilo, metre, coil), size variants and a credit ledger with ageing, and add UPI at the counter. Most hardware stores never need anything bespoke. Consider custom software only when you run several godowns, many hundreds of delivery drops a month or a trade-ordering portal.
Hardware is hard on software for one reason: the same item exists in a dozen sizes, in more than one unit, with a price per piece, per box and per metre. A package that treats a half-inch elbow like a packet of biscuits will drive you back to a notebook. This page names what the system has to do, then walks through what to use at each step.
What the system has to understand about hardware
- Variants by size and brand. One CPVC elbow in four sizes, in two brands, is eight stock lines. The system should show them as one product with variants, not eight unrelated items.
- Multiple units for one item. A wire coil is 90 metres, but you sell 12 metres. Fasteners come in a box of 100 and sell by 10. The software must convert and keep the stock right.
- Rate lists by customer type. A retail rate, a trade rate and a contractor rate for the same item, with discounts that do not need manual typing at the counter.
- Credit ledger with ageing. Who owes how much, since when, and which invoices are overdue, shown by name and by site.
- HSN codes and GST invoices. Tax invoices for contractors who need to claim credit, with different rates for different lines.
- Challans and estimates. An estimate or quotation first, a delivery challan on dispatch, an invoice after. Contractors expect this sequence.
- Cheques and post-dated cheques. A register of cheques received, deposit dates and returns.
- Godown and shop stock. Stock split by location and transfers between them.
- Reorder by size. Alerts when a specific size drops below a set quantity, not just when the product group does.
If a package cannot hold unit conversions and size variants cleanly, drop it; no add-on will fix it. Everything else is a convenience that you can work around.
The first month: a UPI QR, a notebook and one spreadsheet
Before you buy anything, do three things. Put a UPI QR at the counter, because trade customers will pay the day they have money if it takes ten seconds. Keep a bound ledger for credit, one page per account, signed at each purchase. And build one spreadsheet for your price list and for sizes with columns for item, size, brand, unit, purchase rate, retail rate, trade rate and reorder level.
That spreadsheet will not run your store, but it forces you to define your catalogue properly, and you will import it into the billing package later. If you skip this step you will pay for the mess in the first week with software.
| Column in the catalogue sheet | Example | Why it matters later |
|---|---|---|
| Item and size | CPVC elbow 3/4 inch | Becomes a variant under one product |
| HSN code | As given by your CA or the supplier invoice | Needed for GST invoices; confirm with your CA |
| Purchase unit and sale unit | Box of 100, sold per piece | Drives unit conversion |
| Three rates | Purchase, retail, trade | Prevents counter negotiation errors |
| Reorder level | Minimum 20 pieces | Feeds the reorder list |
| Rack or bin location | Plumbing wall, bay 3, bin 12 | Lets a new helper find it |
Off-the-shelf billing and stock: the usual answer for years
Most Indian hardware stores run on a packaged GST billing and inventory product. The market has small-business billing apps, accounting packages and distribution-oriented packages, and several support batches, units, party-wise rates and credit ledgers. Examples sold in India include Vyapar, myBillBook, Busy, Tally Prime and Marg. Subscription and licence prices change, and we have not checked current ones, so get a quote and ask for a demo with your own catalogue.
| Need | What to test in a demo | Pass mark |
|---|---|---|
| Unit conversion | Add a wire coil of 90 m and sell 12 m of it | Stock reduces by the right fraction |
| Size variants | Add one elbow with four sizes | Search by size is quick and the stock is per size |
| Party-wise rates | Create a trade rate and a retail rate for one item | The right rate appears when you pick the customer |
| Ageing report | Create three invoices of different dates for one account | Shows buckets by days overdue |
| Delivery challan to invoice | Raise a challan and later convert it | Stock reduces once and no duplicates occur |
| Barcode and label printing | Print a label for a bag of screws | Prints a readable label with the size |
| GST invoice and returns data | Create a B2B invoice and export the data | Your CA is satisfied with the export |
| Backup and access | Restore from a backup and add a second user | Works without calling support, and staff have restricted access |
Our guide to GST billing software lists the features that matter in general, and the billing app solution page explains what a custom build would involve. For the counter hardware that goes with software, see what to buy.
Credit control and collections: where software saves real money
Since credit is the biggest risk in a hardware store, most of the value of your software sits in the ledger. Configure it on day one.
- Credit limits per account, with a warning or a block when a new bill would cross the limit.
- Ageing buckets, such as 0–15, 16–30, 31–60 and 60+ days, reviewed every Saturday.
- Site-wise ledgers for contractors who run several jobs, so you can see which site owes what.
- Cheque register, with post-dated cheque dates and a reminder to deposit them.
- Payment reminders on WhatsApp with the balance and an UPI link; see WhatsApp for business for opt-in and template rules.
- Statement printing, one page per account for monthly or weekly handover.
A simple test is to ask whether you could answer, within a minute, how much money is owed to you from invoices older than 30 days. If not, the software is not doing its main job.
Deliveries, e-way bills and the godown
Once you deliver to sites on most days, you need to keep track of what left the shop, which vehicle took it and who signed for it. A basic route is a delivery register in the billing package or a shared sheet, with columns for challan number, site, items, vehicle, driver and signed copy received.
For goods moving above a certain value, an e-way bill may be required under GST rules. The threshold and the conditions differ by case and state and we have not verified them here; ask your CA and check the GST portal. Many billing packages generate e-way bill data or integrate with the portal, so ask in the demo whether yours does.
| When | What to add | Estimated cost |
|---|---|---|
| 1–5 deliveries a day | A shared delivery sheet and signed challans | Free beyond the package |
| 5–20 deliveries a day | A route planner or delivery module and a rider app, or a billing add-on that tracks status | Often a few hundred to a few thousand rupees a month; unverified |
| Two or more godowns | Stock-transfer entries and godown-wise reports | Usually in the same package; check the tier |
Orders from contractors: WhatsApp, a catalogue and a trade portal
Contractors already order by WhatsApp message or phone call. Make that easier before you build anything: keep a pinned catalogue of your top 100 items with sizes, keep a broadcast list, and use a standard order message format such as site name, item, size and quantity. Staff then key the order into billing and return a confirmation with the total.
If you find your staff are retyping 30-line orders every morning, a small ordering page for approved accounts may pay for itself. It would show the trade rate for the logged-in account, remember the account's usual items and send the order to billing. A website for a store of this kind should not try to be a retail e-commerce shop; the business website solution covers a brochure-plus-enquiry approach, and local SEO covers being found.
When custom software starts to pay, and a concept build
A custom build earns its keep when your volume or structure outgrows a packaged product. Signs include three or more godowns that must reconcile, a delivery fleet with live status, a trade-ordering portal with account-specific prices, a need to connect sales to supplier ordering, or a group of stores that share a catalogue but run different rate lists. Below that, a packaged product plus a clean catalogue is cheaper and safer.
- Size-aware stock and a reorder list that reflects seasonal movement.
- A trade ordering page with account-specific rate lists and order history.
- Delivery tracking with challan, vehicle and proof of delivery.
- Credit control with limits, ageing and automatic WhatsApp reminders.
- Supplier ordering that turns the reorder list into purchase orders.
Our concept build, Tillbook, is a countertop billing app with GST invoices, a customer ledger and stock in one place. It is a concept: it does not yet cover size variants, unit conversions or site deliveries, which a hardware store would need, so treat it as a starting point for a conversation and not a ready product. If you have a hardware store that has outgrown packaged software, The Saral can scope a build; read about what a billing app involves or send a brief.
More on starting a hardware store
- Start hereThe full playbook →Models, licences, startup costs and the steps to your first customer.
- Go deeperWhat to buy →Bins, racks, cutting kit, stock by trade, paint corner and a delivery vehicle, costed, plus what to skip.
- Go deeperGetting customers →Win mistris, contractors and housing societies first: credit rules, rate lists, seasons and retention.
- Go deeperFinding suppliers →Brand distributors, wholesale hubs and manufacturers, vetted: terms, credit, backups and red flags.
Questions people ask
What billing software is best for a hardware store in India?
The one that passes your own demo test: unit conversion, size variants, party-wise rates, ageing reports and GST invoices with your real items. Several Indian billing and accounting packages can do this, so shortlist two or three and test with ten items. Do not choose on a feature list or a low price alone; confirm current pricing directly.
Can I use a free billing app for a hardware store?
You can start with a free or low-cost app if it handles units, variants and credit, but check the limits on invoices, users and stock items. Many free tiers are enough for a first few months. Move to a paid plan when you need ageing reports, multiple users or e-way bill data. Confirm current plan limits with the vendor.
How do I manage thousands of sizes in software?
Group each item as one product with size variants, set the right unit conversion and import them from a clean sheet instead of keying them by hand. Use short consistent names such as brand, item, size. Label bins with the same names, and print barcode labels for loose fasteners. Review items with no sales every quarter and remove them.
Do I need an e-way bill for site deliveries?
It depends on the value and nature of the goods and the rules where you operate. An e-way bill may be required for goods moving above a prescribed value under GST, but thresholds and conditions vary, and we have not verified them. Ask your CA and check the GST portal; many billing packages can produce the data.
When should a hardware store consider custom software?
When you run several godowns, a delivery fleet, or a trade-ordering portal that off-the-shelf billing cannot support, and when staff time spent working around the package is greater than the cost of a build. For one shop with a delivery rider, a packaged product and a good catalogue is usually enough.