Step 2 of 4 · Stock and wastage

Reorder levels: when to order your top items, and how much

Set a reorder level for each top item from your weekly counts: daily use × supplier lead time, plus a buffer. Order when stock touches it, not when it's gone.

A reorder level is the quantity at which you place the next order, so new stock arrives before the old runs out. Work it out as average daily use × days the supplier takes to deliver, plus a few days' buffer. Write it on the shelf label and in your sheet, and order whenever stock touches the line.

Why it matters

Running out and over-ordering are the same mistake from opposite ends. Run out of a popular item and customers leave or buy elsewhere; order too much and money sits on the shelf, perishables spoil, and the store room gets crowded enough that old stock hides at the back.

Many owners order by eye: whoever opens the store room decides it looks low. That works while the owner does every order. A written level lets a staff member order correctly on a day you're away, and it makes the order quantity a decision you made once rather than a guess every week.

At this stage you can set levels from real use. Four to eight weeks of weekly counts and purchase invoices tell you how fast each item actually goes.

How to do it

Do this for your top 15 to 25 items first, the ones that hurt most when they run out or cost most when they pile up.

  1. Find average daily use

    Take total use over the last four weeks (from your counts and invoices) and divide by the days you were open. Note the busiest day of the week separately; if Saturdays use double, your level must cover a Saturday.

  2. Note the lead time for each supplier

    Lead time is the gap between placing the order and the stock being usable on your shelf, not the supplier's promise. A distributor who visits on Tuesdays and Fridays has a lead time of up to four days for an order placed on a Wednesday. If you fetch from the wholesale market yourself, count the days until your next trip.

  3. Add a safety buffer

    Add a few days of use for the things that go wrong: a late delivery, a sudden order for 50 people, a festival week. Keep the buffer small for perishables (milk, bread, vegetables) and larger for items that keep and are hard to replace quickly. Reorder level = daily use × lead time + buffer.

  4. Set the order quantity too

    Decide how much to order when you hit the level: usually enough to last until the following delivery after this one, rounded up to the supplier's pack size or minimum order. Check it against shelf life and storage space; a cheaper bulk rate isn't a saving if a third of it expires.

  5. Make the level visible

    Write the level and order quantity on the shelf or bin label ("Reorder at 6, order 12") and in the stock sheet. Some owners put a coloured card or tape line at the level: when the stock is down to the card, the card goes on the order board or into the supplier's WhatsApp chat.

  6. Review every month

    Look at which items ran out and which were still sitting full when the next order came. Raise the level for the first, lower it for the second. Change levels ahead of known seasons, such as the wedding season, exams or Diwali, using last year's invoices if you have them.

Illustrative figures from different businesses, rounded up. Use your own counts and supplier timings.
ItemDaily useLead timeBufferReorder atOrder quantity
Cooking oil (15 L tin)0.4 tin3 days2 days2 tins4 tins
Hair colour tubes3 tubes5 days4 days27 tubes30 tubes
Milk (litre)20 L1 dayhalf a day30 Ldaily standing order

Your result

A short table of levels and order quantities, visible on the shelves and in your sheet, plus a monthly review date.

Items with a reorder level: ____ of my top items
Item | daily use | lead time | buffer | reorder at | order qty
1.
2.
3.
Where levels are shown: shelf labels / sheet / billing app
Who places orders when stock hits the level: ______
Monthly review date: ______  seasons to adjust for: ______

Fill it in on your checklist, next to this topic. It stays in this browser.

Time and cost

Time
Two to three hours to set levels for 20 items once you have four weeks of counts. Ten minutes a week to order against them, and half an hour a month to review.
Cost
Free. Labels, tape or a small whiteboard for the order board cost very little. Billing apps can flag low stock automatically, but only if every sale and purchase is entered.

Ballparks to verify: prices and fees change by city and over time, so check current rates before you budget.

Common mistakes

  • Using the supplier's promised delivery time

    If they say next day but usually come in two, your level must cover two days. Use what actually happens.

  • One level for the whole year

    Use changes with seasons and festivals. A level that was right in June can leave you short in October.

  • Ignoring the minimum order

    If the supplier only delivers above a certain amount, combine items into one order rather than hitting the minimum with a pile of slow stock.

  • Setting levels and nobody owning them

    Name the person who checks the labels and places orders, and a backup for their day off.

Go deeper

The playbooks are written for one business each. Start with the full playbook or find yours.

Questions people ask

What's the difference between a reorder level and a minimum stock?

Minimum stock (or safety stock) is the buffer you never want to dip below. The reorder level is higher: buffer plus what you'll use while waiting for the delivery. Order at the reorder level and you should rarely touch the minimum.

Should I keep more stock to get a bulk discount?

Only if it keeps well, you have space, and the cash isn't needed elsewhere. Work out how many weeks it will last; if that's longer than its shelf life or ties up money for rent and salaries, the discount costs more than it saves.

How do I handle a supplier who keeps delivering late?

Raise the buffer for their items in the short term, then sort out the terms: see agreeing delivery days and minimum orders.

← All business basics

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert