What to buy · D2C brand · 6 min read

What to buy to launch an electronics D2C brand in India

What an accessories or audio D2C brand in India spends on before launch: samples, tooling, certification, first batch, packaging, and what to leave for later.

Planning this? Ask an expert, free ↓
Bassline premium acoustics and wireless audio D2C
Runs on Bassline · Audio D2C

Part of the playbook: How to start a D2C brand in India

Spend in this order: samples and a pilot run from one factory, the certification your product category needs, a first batch sized to roughly 6–8 weeks of sales, retail-grade packaging, and a hosted store. Hold back on tooling for new moulds, a second SKU, a warehouse and a paid app until the first batch has sold through.

For one hero product (say a pair of wireless earbuds, a 10,000 mAh power bank or a braided cable line) a lean launch is often ₹6–15 lakh as an estimate, and most of it is stock and testing, not the website. The expensive mistakes are paying for private moulds too early, importing before checking certification, and ordering four colours when two will sell.

Samples and engineering: pay for proof, not volume

Nobody should place a production order from a catalogue photo. For electronics, the first spend is a loop of samples that you break on purpose: drop them, charge them overnight, pair them with ten phones, and leave them in a hot car. Each loop costs money, so budget for three of them.

Estimates in ₹ for India in 2026. Factory quotes, mould prices and inspection fees vary widely; get written quotes.
StepEstimated costWhat you are checking
Catalogue (ODM or white-label) samples, 3–5 units from 2–3 factories₹15,000–60,000 incl. courier and dutySound signature, build, app and Bluetooth pairing, charging case latching, battery life against the claim
Customisation of an ODM design (logo, colourway, tuning, packaging insert)₹30,000–1.5 lakhWhether the factory can change firmware text, voice prompts, colours and ear-tip sets without a new mould
Own industrial design and new mould (only if you must differ)₹4–15 lakh per mould setPlastic injection moulds are paid up front; this is where first-time brands burn runway
Pilot run of 100–300 units₹1–4 lakhDefect rate on your own line, not the golden sample
Independent inspection of the pilot (a third-party inspector or a local QC freelancer)₹8,000–25,000 per visitRandom-sample checks against a written spec and AQL level

An ODM (original design manufacturer) already has a working design that you rebrand. An OEM builds to your design. For most first-time Indian brands an ODM base with your tuning, colours, packaging and firmware tweaks is the sane starting point, because a new mould set means months and lakhs before you know if anyone wants it.

Certification and compliance spend

This is the line item first-time founders forget, and it can stop a launch. Many consumer electronics are covered by BIS's Compulsory Registration Scheme (CRS), and wireless products can also need wireless-equipment approval. Consultant sites say wireless earphones and headphones come under IS 616 and power banks and chargers under their own standards, but those are commercial pages; confirm the list for your exact product on the BIS and wireless-regulator sites before you pay a factory.

Estimates only. Scope, lab queues and fees change; I have not verified current official fee schedules, so treat these as planning numbers.
ItemEstimated costNotes
BIS CRS registration for your product (lab test plus registration)₹1.5–5 lakh, plus annual feesUsually tied to a factory that holds or can obtain registration; a brand-owner route exists. Ask what is in your factory's name and what is in yours
Wireless approval for Bluetooth or Wi-Fi products₹30,000–1 lakhRequired for many radio products; confirm current process with the regulator
Battery safety test summary (cells and packs)Often supplied by the factory; own test ₹50,000+Ask for the document before ordering, not after a courier rejects the parcel
Legal Metrology packaging declarationsCost of box design rerunsMRP, net quantity, manufacturer or importer address, country of origin, customer-care contact; get them right in the first print run
Trademark filing for the brand (class 9 for electronics)₹10,000–25,000 per class incl. attorneyFile before you print boxes

Not legal advice. Whether your product needs BIS registration, wireless approval or import licensing depends on its exact type and where it is made. Ask the BIS or your CA/consultant in writing before you place a production order.

The first batch: how much, how many variants

Size the first batch from the number of orders you can realistically fill in 6–8 weeks, then add 5–8% for dead-on-arrival units and replacement shipments. Sell-through, not factory minimums, should set the number, so negotiate the minimum order quantity (MOQ) down to one colour if you have to.

  • One hero SKU, two colours. A black and a second colour is enough. Every colour doubles the stock you are guessing at.
  • Spares and accessories bundled in. Extra ear tips, a short cable and a pouch cost little and cut the first complaints.
  • Warranty buffer. Keep 3–5% as replacement stock; warranty returns arrive in weeks 3–10.
  • Air vs sea. Air freight of a small first batch from China or Shenzhen is fast but dear per kg; sea freight is cheaper but adds weeks and port-clearance risk. For a first order under a few hundred units, many brands accept air or courier to test the market.
  • Landed cost, not ex-factory cost. Add freight, customs duty and IGST on import, clearing agent fees, inland transport and inspection. Duty rates change; ask your clearing agent for the current number on your HS code.

As a worked example, an earbud that costs about ₹450 ex-factory can easily land near ₹650–800 once freight, duty, inspection, packaging and a few percent of defect are added. Do the sum with your own quotes; a 20% error here is the difference between a profitable brand and an expensive hobby.

Packaging, unboxing and photography

For a product that people cannot touch before buying, the box and the photos are the shop. Packaging also has to survive Indian courier handling, which is rougher than most designers assume.

Rough per-unit and project costs in ₹ for India. Quantities and print spec decide the rate.
ItemEstimated costComment
Retail box design with required legal panel₹20,000–80,000A packaging designer who has done electronics; ask for a die-line proof first
Printed rigid or folding retail boxes₹40–150 per box at a few hundred units, lower at thousandsSmall runs are dear; a local carton printer is often cheaper than overseas for short runs
Outer shipper carton and filler (kraft, corrugated, paper cushioning)₹12–35 per orderDrop-test a packed order from waist height before approving
Tamper-evident seal or sticker₹1–3 per unitCuts the 'box was already opened' complaint on COD returns
Product photography and 20–30 second demo videos₹25,000–1.2 lakhLifestyle, close-up, size-in-hand, and the charging case open and shut

Our concept build Bassline treats the box as part of the product: an unboxing flow that leads the buyer to pair, register warranty and set up the companion app. You do not need that on day one, but a QR card in the box that opens a setup and warranty page is cheap and worth printing.

Store, payments and ops kit

The store can be rented. Do not build a custom storefront before you have 500 or so orders and know where your conversion drops.

Estimates in ₹; fees and plan prices change often and are not verified here.
ItemEstimated costRent or buy
Hosted store (Shopify-type or an Indian equivalent) with a clean theme₹30,000–1.2 lakh to set up; monthly plan on topRent. See what a store needs
Payment gateway with UPI, cards and COD handlingSetup near zero; per-transaction feeRent. Confirm fees and settlement days with each provider
Shipping aggregator account (Shiprocket-type) with 2–3 courier partnersPer-shipment rates; no upfront fee at the startRent
Barcode or QR labels, a label printer, a packing table, a weighing scale₹15,000–35,000Buy if you pack from home or a small room
Basic smartphone test bench: 4–6 phones across brands plus a charger and cable set₹40,000–90,000 (second-hand ok)Buy; compatibility complaints are the top support cost
Small storage: racks, bins, humidity packs₹10,000–30,000Buy; avoid damp rooms for cells and boxes

What not to buy yet

  • A warehouse or a 3PL contract. Pack from a room for the first few hundred orders. A fulfilment partner makes sense when you ship more than you can pack in a day or you need a city-wise spread.
  • A custom mobile app. Start with a web store and a setup page. Build an app only if the product genuinely needs one for its function; read app, website or both.
  • Your own mould for accessories. Silicone cases and cable braids can use existing factory tooling with your logo.
  • Second and third categories. A strong earbud brand does not become a power-bank brand by adding a SKU; sourcing, certification and support differ.
  • Large influencer retainers. Send units and pay on delivery of content until you know what converts.
  • Marketplace ads. List once reviews exist; see getting customers.

For the broader plan, return to how to start a D2C brand, then see finding and vetting factories before you ask anyone for a quotation.

Paying for it

More on starting a D2C brand

Questions people ask

How much money do I need to launch an electronics D2C brand in India?

A lean launch with one hero product often falls in the ₹6–15 lakh range as an estimate, covering samples, certification, a first batch of a few hundred units, packaging and basic marketing. New moulds, a wide catalogue or custom app can double it. Get written quotes for certification and landed cost before fixing a budget.

Do I need BIS certification before selling earbuds or power banks?

Many consumer electronics fall under BIS registration, and wireless products may need additional wireless approval, but the exact list depends on the product. Do not take a factory's word for it. Ask for the registration details in writing, check the official BIS site or a consultant, and confirm before the production order, not after.

Should I use an ODM or build my own design?

Most first-time brands should start with an ODM base and customise tuning, colours and packaging. A fully own design needs new moulds, which cost lakhs and months. Move to your own design once you have sales data showing what customers want that existing designs cannot give.

Is air or sea freight better for the first batch?

For a small first batch, air or express courier is common because speed lets you test the market and correct mistakes. Sea freight is cheaper per unit but slower, and a design fault found on arrival is expensive. Move to sea for repeat orders once the product is proven.

How big should the first order be?

Order enough for roughly 6–8 weeks of realistic sales plus 5–8% spares for defects and replacements, in one or two colours. Negotiate the minimum order down if needed. Over-ordering ties up cash that you also need for ads and returns.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert