Finding suppliers · facility management company · 6 min read

Finding suppliers for a facility management company

Where a facility management company in India sources janitorial chemicals, machines, uniforms, consumables, MEP spares and subcontractors, and how to vet them.

Planning this? Ask an expert, free ↓
Tidybee verified home cleaning and domestic help
Runs on TidyBee · Instant house help

Part of the playbook: How to start a facility management company in India

Source from three kinds of supplier: janitorial distributors for chemicals and consumables, machine dealers with local service, and licensed subcontractors for what you do not do yourself, such as pest control, guarding or facade work. Pick them by delivery speed, service support and paperwork, not the lowest price per can.

A missed delivery stops a site, and a bad chemical ruins a floor the client then charges you for. Keep two suppliers for anything the contract needs weekly, and ask each for invoices with GST and documents you can show an auditor.

What you source, and from whom

General sourcing patterns. Local names and clusters differ by city, so ask peers at other FM firms and your own supervisors before you place the first order.
CategorySupplier typeWhere to lookUsage rhythm
Janitorial chemicals (floor, glass, toilet, disinfectant)Manufacturers, regional distributors, institutional suppliersIndustrial estates in your city, trade fairs, chemical markets, supplier directories and distributor networks of national brandsMonthly, in 5 and 20 litre cans or drums
Floor and carpet machines, vacuums, scrubber-dryersAuthorised dealers and OEM branchesDealers in your city, industrial equipment exhibitions, manufacturer sites for dealer listsOne-off, then spares and servicing
Consumables (tissue, garbage bags, soap, sanitiser, air-freshener refills)Paper and hygiene wholesalers, converters, dispenser suppliersWholesale paper and stationery markets, industrial clusters near your cityWeekly to monthly, often per site
Uniforms, ID cards and safety shoesGarment units and workwear suppliers; printers for IDTailoring clusters and wholesale markets in your region; local ID card printersAnnual, plus replacements
PPE and safety gearIndustrial safety dealersLocal industrial supply markets, factory-estate dealersQuarterly
Electrical, plumbing and HVAC sparesElectrical and sanitary wholesalers, HVAC part dealers, OEM spare countersElectrical wholesale lanes and OEM service centres in your cityAs breakdowns occur; keep a minimum stock
Pest control, STP, water-tank cleaning, facade access, waste handlingLicensed and trained specialist agenciesReferrals from clients' EHS teams and from building managersContract or periodic
Manpower subcontractors and securityLabour suppliers; licensed security agenciesExisting network; chambers of commerce; clients' vendor listsSeasonal or contract

The playbook on facility management lists what services to offer; this page is about who sells you what you need to deliver them.

Chemicals: where mistakes cost the most

Floor, toilet and glass chemicals are cheap per litre and expensive per mistake. Acidic toilet cleaner on marble etches it; strong alkali strips a floor's polish; a wrong disinfectant strength in a hospital fails an audit.

  • Ask for a technical data sheet and safety data sheet for every product, and keep a copy on site.
  • Test on a hidden patch before a new chemical goes on marble, terrazzo, granite or wooden floors.
  • Insist on dilution charts and a measuring cap or dosing bottle, so workers do not guess strength.
  • Prefer concentrate if your supervisors can dilute correctly; it cuts transport and cost per use, but bad dilution wastes the saving.
  • Ask what disinfectant claims the supplier can document and check that labels carry a batch number and date. For hospitals, follow the hospital's infection-control protocol, not the supplier's brochure.
  • Check the batch on first delivery for colour, smell and fill level. Reject drums that arrive leaking or relabelled.
  • Test samples side by side for two weeks at a site before changing your standard product.

I have not verified product-specific regulatory approvals. For hospital disinfection, bio-medical waste and food-area sanitation, use the client's protocol and any applicable state or central rules, and ask the supplier for documents rather than relying on claims.

Machines and spares: buy for service, not for sticker price

A machine that waits two weeks for a part costs more than a pricier one with a dealer around the corner. Rent or borrow a demo unit before you commit.

Questions to put to every machine dealer. Compare two or three dealers and prefer those who answer in writing.
Ask the dealerWhy it matters
Where is your service centre and how fast do you attend?A floor machine down at a hospital is a client complaint within hours
What do pads, brushes, squeegee blades and motors cost, and are they in stock?Consumable parts quickly outspend the machine's price difference
Is a demo on our floor type possible?Marble, vitrified tile, epoxy and carpet each need different pads and speeds
What is the warranty, and what does it exclude?Misuse and water ingress are common exclusions
Will you buy back or exchange old units?Reduces the cost when the contract ends
Can you train our supervisors on site?Operators ruin machines first; training is cheaper than repairs

For HVAC and electrical spares, keep a short list of wholesalers and the OEM's service counters. Hold minimum stock of fuses, MCBs, contactors, float switches, belts and filters for plants you maintain, and never of spares you cannot match to a unit.

Consumables and uniforms: price and reliability

Tissue, soap and bag consumption at a site is steady and visible; a run-out is an immediate complaint. If the contract makes you responsible, you are also exposed to price swings.

  • Fix the specification: tissue ply and size, garbage bag micron and size, soap type, dispenser brand. Switching specification mid-contract triggers disputes.
  • Quote a rate card to the client and bill at actuals plus a handling margin, or fix a monthly quantity with a top-up clause.
  • Dispensers: many suppliers loan dispensers if you buy their refills. That helps cash but locks you in; check the minimum purchase and removal terms.
  • Uniform makers: order samples in the three most common sizes, wash them five times and see how they hold. Fix fabric, colour code and embroidery with a purchase order so replacements match.
  • ID cards: keep the template and a spare PVC stock; reprint takes a day with the right printer.

Order the first lot of uniforms three weeks before go-live; tailoring is slower than people expect, and a crew in mismatched clothes on day one is what a client remembers.

Subcontractors, backups and credit terms

Terms differ by supplier and city. Compare two quotes, pay by bank transfer and keep GST invoices so input credit flows.
SupplierTypical terms (estimate)What to insist on
Chemical distributorAdvance for the first order, 15 to 30 days credit after a few monthsBatch tracking, return of damaged stock, written price validity
Machine dealerPart advance; the rest on delivery or a rentalWritten warranty, service response time, spares list
Consumables wholesalerWeekly or fortnightly billing after the first monthSpec lock, delivery slots, a replacement for short supply
Uniform makerAdvance of about half, balance on deliverySample approval, delivery date, repair of misfits
Pest control and specialist subcontractorsPer visit or annual, billed monthly or quarterlyValid licence and trained staff, service reports signed by the site, insurance, safety data sheets
Labour subcontractorBilled against attendance each monthTheir EPF, ESI and licence proofs each month before you pay

Keep a backup for each critical item: a second chemical supplier you have bought from at least once, a second machine service vendor and a second labour supplier for emergencies. Tell them the rough volume you expect, so they will respond when you call.

If you buy from small manufacturers registered as micro or small enterprises, payment timelines carry legal weight: tax-site summaries describe a 15-day default without a written agreement and a 45-day cap with one, with tax consequences for late payers. I have not verified this against the Act, so ask your CA and note the due dates on your payables calendar.

Vetting and red flags

  • Visit the godown or unit of any supplier you will buy from monthly. See stock levels, storage and how drums are labelled.
  • Ask for GST registration and verify it on the GST portal, and bank details in the company's name.
  • Trial order first, small enough to lose. Compare delivered quality with the sample you approved.
  • Reference check: ask for two current clients such as a hospital or office and call them.
  • Check subcontractors' paperwork: licence, EPF and ESI, insurance and training records. Your client will hold you responsible for them.
  • Red flags: unlabelled containers, no safety sheet, prices far below others, cash-only demands, no invoice, refusal to let you test, or vague answers about service.
  • Review twice a year: compare price, delivery record and complaints; replace the weakest supplier before a contract renewal rather than after a failure.

A well-run supplier book is a small spreadsheet: supplier, product, rate, last order, delivery time, complaints and documents. It can sit beside your attendance and payroll tools; see also the GST billing software guide for keeping purchase invoices in order.

More on starting a facility management company

Questions people ask

Where do facility management companies buy janitorial chemicals?

Mostly from regional distributors, manufacturers in industrial estates and institutional-supply dealers, in 5 and 20 litre cans or drums. Ask for technical and safety data sheets, test on a hidden patch, and compare two suppliers over a trial order. Hospitals and food areas follow the client's protocol, so use documented products rather than brochure claims.

Should I buy machines from the manufacturer or a dealer?

Buy from whoever has a service centre in your city and stocks spares, whether that is the OEM's branch or an authorised dealer. Ask for a demo on your floor type, written warranty terms and operator training. A cheaper machine with a two-week wait for parts costs more than a dearer one with fast service.

How do I vet a subcontractor for pest control or guarding?

Check the licence required for the activity, trained and verified staff, insurance, service report samples and two client references, and keep copies of their documents. For guards, the agency must hold the relevant state licence under the central private security agency law. You stay answerable to your client, so collect proofs monthly.

What credit terms can I expect from suppliers?

New firms usually pay in advance or on delivery for the first orders, then negotiate 15 to 30 days of credit after a few months of reliable buying. Uniform makers often take a part advance. Compare this with your clients' payment cycle, because suppliers paid slower than you collect create a cash gap.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert