What to buy · furniture business · 6 min read

What to buy to start a furniture business in India

What a furniture maker or retailer in India buys first: panel saw, edge bander, finishing booth, showroom pieces and delivery gear, with ballpark ₹ costs.

Planning this? Ask an expert, free ↓
Nookly room-scale furniture shopping and turnkey interior design
Runs on Nookly · Furniture & interiors

Part of the playbook: How to start a furniture business in India: workshop to showroom

A furniture business spends on four things: machines that cut and join, a finishing area, a showroom that sells, and the packing and delivery gear that gets pieces to a flat in one piece. On day one buy a sliding table panel saw, a thickness planer if you use solid wood, hand and power tools, clamps, a compressor with spray guns, and moving blankets and corner guards. Rent or outsource the rest.

As an estimate, a small workshop that does panel furniture and some solid wood work can be tooled for ₹6–15 lakh, and a showroom adds ₹5–12 lakh. Retailers who only sell pieces made elsewhere can skip the machines entirely. The usual mistake is buying a CNC router before you have enough repeat jobs to keep it busy.

Machines for the cutting and joining bay

What you buy depends on your material. Engineered boards (plywood, MDF, particle board, HDHMR) need accurate straight cuts and clean edges. Solid wood (sheesham, teak, mango, rubberwood, acacia) needs machines that flatten and size rough planks. Most small makers do both, so start with the machines that serve both.

Ballpark ₹ estimates for 2026, before GST and freight; second-hand machines from dealers can cost 40–60% less but check motors, fences and bearings.
MachineEstimated costWhy it mattersBuy now or later
Sliding table panel saw₹1.5–6 lakh (Indian-made to entry import)Square, chip-free cuts on full 8x4 ft boards; the machine that decides your joint qualityNow
Thickness planer and surface planer (jointer)₹60,000–2.5 lakh eachFlattens and sizes solid wood planks; without it you depend on a sawmill for every dimensionNow if you use solid wood
Manual or semi-automatic edge bander₹1–4 lakhSeals board edges with PVC or ABS tape; unsealed edges swell and peel in monsoonNow for board furniture
Band saw and router table₹40,000–1.5 lakh togetherCurves, legs, rails and decorative profilesNow
Boring and dowelling machine, or a drilling jig set₹30,000–2 lakhHoles for cam locks, dowels and hinges, repeatable across a batchJigs now, machine at volume
Orbital and belt sanders, dust-collection hoses₹15,000–60,000Surface prep before polish, which decides how the finish looksNow
Pneumatic nailer and stapler set, with compressor₹25,000–80,000Backing panels, upholstery frames, fast assemblyNow
CNC router (3-axis, flatbed)₹6–20 lakh and upCarved panels, nested cutting, jali and repeat patterns; pays only with steady repeat workLater, or outsource per sheet
Vacuum or hot press for veneers and laminates₹3–12 lakhFlat, bubble-free veneered tops and doorsLater; outsource pressing first

Buy clamps early and buy more than you think: sash clamps, F-clamps and band clamps. Glue-ups wait on clamps, and clamps cost little. Add a proper dust extractor too, because sawdust is both a fire risk and the first thing a pollution or factory inspector notices.

Machinery above certain power and worker counts can trigger factory registration and pollution board consent. Check with your state factories department and Pollution Control Board before installing a spray booth or a large saw line. Not legal advice.

The finishing area: where good furniture is won or lost

Customers judge a piece by its finish before they test a joint. Finishing is also the messiest, most fume-heavy part of the job, so give it its own corner with ventilation, away from sawdust.

Estimates for a small workshop; a proper downdraft spray booth costs more and may need pollution consent.
Finish typeKit you needEstimated start-upWatch out for
Melamine or lacquer sprayingCompressor, spray guns, a separate booth or curtained bay, exhaust fan, masks and organic-vapour cartridges₹80,000–2.5 lakhDust nibs on wet coats, fumes, fire; keep solvent stock small
PU (polyurethane) polishSpray setup as above, sanding sealer, PU topcoat, hardener, thinner₹1–3 lakhPot life of mixed PU is short; mix only what one piece needs
Hand French polish and waxBrushes, pads, shellac, stains and a skilled hand₹20,000–50,000 of consumablesSlow, hard to hire for, but valued on heritage pieces
Laminate and veneer pressingContact adhesive, rollers, trimmer, press access₹30,000–1 lakh by handBubbles, lifting corners and visible joints
Powder-coated metal legs and framesOutsource to a powder-coating shopPer pieceRust at weld points if the shop skips degreasing

Plan a drying rack or space. Pieces that wait for coats to cure take up more floor than the machines do. A workshop that cannot dry pieces separately ends up stacking tacky tops and ruining them.

Hand tools and small kit people forget

  • Measuring and marking: steel tapes, try squares, marking gauges, a laser measure for site visits, and a long straightedge. Wrong measurements waste more boards than any machine fault.
  • Hand tools: chisels, hand planes, mallets, a good back saw for joinery, and spare blades for every machine.
  • Hardware testing: a stock of the hinges, soft-close channels and locks you use, so you can sample-test before a batch.
  • Moisture meter (₹1,500–8,000): reads moisture content of timber. Wood that is too wet when built will shrink and crack in a dry flat. This is the cheapest insurance in the trade.
  • Fire safety: extinguishers (ABC and CO2) near finishing and glue areas, with staff who know how to use them.
  • Personal protection: dust masks, ear defenders, safety glasses and cut-resistant gloves for the saw crew.

The showroom: what to buy and what to borrow

A showroom sells because people can touch and sit. You do not need a big one to start, but you do need pieces that show your finish quality, in a layout that looks like a room, not a warehouse.

Estimates for a 600 to 900 sq ft tier-2 showroom; metro fit-outs and rents are higher.
ItemEstimated costNotes
Display pieces: 8 to 15 hero products₹2.5–6 lakh at costShow a sofa, bed, dining set, wardrobe, centre table, study desk; rotate quarterly
Lighting: track lights and warm LEDs₹40,000–1.2 lakhWood looks flat under cold white light; warm light shows grain
Finish and fabric swatch boards₹15,000–40,000Sample laminates, veneers, PU shades and upholstery; customers decide on these
Signage and branding₹40,000–1.5 lakhCheck local rules and permission from the landlord and municipal body
Rugs, curtains and styling₹30,000–80,000Cheap and does more for the look than another piece
Billing counter, tablet or PC, WhatsApp-linked phone₹30,000–60,000See the software page for what runs on it

Consider the model where display pieces are made to order and sold off the showroom floor at a discount when the next design arrives. That turns display stock into a rotating exhibit instead of dead capital. Consider borrowing from carpenters and upholsterers too: some will place a piece on display on consignment in return for referrals.

Packing and delivery gear

Most furniture complaints come from transit, not from the workshop. A scratched top costs more to repair than the packing material that would have prevented it.

  • Corner guards, foam sheets, stretch film, bubble wrap and moving blankets: ₹15,000–40,000 for the first stock. Wrap every polished surface before it leaves the workshop.
  • Furniture trolleys, straps and a basic tool kit for on-site assembly: ₹10,000–25,000.
  • A hired tempo or small truck with a driver until you have 15 to 20 deliveries a month. Owning a vehicle (₹6–10 lakh) only pays when it stays busy and you have a trained loading crew.
  • Flat-pack boxes and labels if you sell knock-down pieces. Weight and box size decide your courier or freight cost, so design pieces to pack small. Check Legal Metrology rules for packaged goods.

Photograph a piece packed and ready to leave. If the customer later reports damage, you have a before picture, and your packers see the standard they are held to.

What not to buy yet

  • A CNC router before you have three repeat designs to nest. Outsource cutting per sheet to a CNC job shop first and see how often you use it.
  • Large timber stock. Seasoned wood sitting for a year ties up cash and can still move. Buy per order or per batch, from a depot with proper bills.
  • An imported edge bander or sander. A reliable Indian-made machine with spare parts nearby beats an imported one waiting on a part.
  • A second showroom or a premium location. Prove the first one pays its own rent from sales, not from your savings.
  • A big range of fabrics and finishes. Offer six laminates, four polish shades and eight fabrics, not sixty. Every extra option is stock you carry and a mistake waiting to happen.
  • BIS-testing equipment. If your products fall under the BIS furniture order, the licence process involves in-house testing expectations. Talk to BIS and a consultant first; see the playbook for the compliance picture.

Want to see where retail technology fits before you spend? The software page covers what to run the order book on, and finding suppliers covers where the timber and boards come from.

Paying for it

More on starting a furniture business

Questions people ask

How much does it cost to set up a small furniture workshop in India?

A small workshop with a sliding table saw, planer, edge bander, router, sanders, clamps and a basic spray setup is roughly ₹6–15 lakh in machines and tools as an estimate, before the shed and deposit. Second-hand machines lower this. A retail-only model that outsources production avoids most of it.

Which machine should I buy first for a furniture workshop?

A sliding table panel saw if you work mostly with boards, and a thickness planer if you work mostly with solid wood. The panel saw gives square, chip-free cuts, which decides the quality of every joint downstream. Edge banding and a spray setup come next, because finish is what customers see first.

Should I buy a CNC router for my furniture business?

Usually not at the start. A CNC router costs from about ₹6 lakh and pays only when you have repeat designs, such as carved panels or nested cabinet parts, to keep it busy. Many small makers outsource CNC cutting per sheet until they know how often they would use their own machine.

Do I need a showroom to sell furniture?

Not always, but most buyers want to sit, touch and check the finish before paying a large sum. A small showroom of 600 to 900 sq ft with ten or so well-finished pieces and swatch boards usually works better than a big one. An online-only model needs excellent photos, clear dimensions and a clear damage policy.

Is it better to buy or rent a delivery vehicle for furniture?

Rent or hire a tempo until you have 15 to 20 deliveries a month. A vehicle is only worth owning when it stays busy and you have a trained loading and assembly crew. Until then the cost of a driver, fuel, insurance and idle days is higher than hiring per trip.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert