Who to hire · furniture business · 5 min read

Who to hire for a furniture business in India

Who a furniture workshop and showroom hires first in India: head carpenter, polish and finishing, sales, delivery crew, with ballpark pay and how to vet each.

Planning this? Ask an expert, free ↓
Nookly room-scale furniture shopping and turnkey interior design
Runs on Nookly · Furniture & interiors

Part of the playbook: How to start a furniture business in India: workshop to showroom

Hire a head carpenter first, then a finisher (polish or PU sprayer), a showroom salesperson who can read a drawing, and a delivery and assembly pair. A designer or 3D visualiser comes later. If you outsource production to contract workshops, your first hire is a production coordinator who visits them and checks pieces before they ship.

As an estimate, a small workshop and showroom runs on 6 to 10 people, and pay is the usual reason it loses them. Carpenters are scarce, move between employers for a few hundred rupees a day, and often prefer piece rates. This page covers who to hire, pay ranges, where to find them, vetting tasks, and the contract choices that matter.

Roles, in the order you need them

Roles in the order most small furniture businesses need them; contract production changes the order, see below.
OrderRoleWhat they doWhy now
1Head carpenter or workshop supervisorReads drawings, plans cuts, sets quality, supervises the crewEvery other hire reports to him; one bad supervisor ruins a month
2Finisher: polish, PU sprayerSanding, stain, sealer, topcoat; matches shadesFinish decides what customers see; good finishers are the scarcest
3Carpenters and helpers (2 to 4)Cutting, edge banding, assembly, hardware fittingAdd as order volume rises, not before
4Showroom salespersonWalks buyers through range and finishes, quotes, takes advancesShowrooms sell with a person, not a price tag
5Delivery and assembly pairLoad, drive, assemble on site, photograph, collect feedbackLast-mile mistakes cost more than workshop ones
6Upholsterer (in house or contract)Sofas, headboards and cushionsOnly if you sell upholstered pieces regularly
7Designer or 3D visualiserDrawings, renders, customisation requestsWhen custom orders outgrow the owner's own time
8Accounts and order coordinatorBilling, order tracker, supplier payments, after-sales logWhen the owner's evenings go to paperwork

If you start with a retail-first model, your first hire is a production coordinator who owns the relationship with contract workshops: samples, deadlines, quality checks at the workshop, and rejecting a piece before it travels. This job replaces the head carpenter for an outsourcing business.

Pay: ballpark ranges by city tier

Estimates only for 2026; actual pay depends on the city, skills and local minimum wage rules for skilled and semi-skilled workers.
RoleTier-2 (₹ per month)Metro (₹ per month)Notes
Head carpenter or supervisor30,000–50,00040,000–70,000Often negotiates a bonus per order delivered on time
Skilled carpenter20,000–32,00026,000–42,000Often paid ₹700–1,500 per day or piece rate
Finisher, polish or PU sprayer20,000–35,00028,000–48,000Specialist; poaching is common
Helper or trainee12,000–16,00015,000–22,000Check wage and overtime rules locally
Showroom salesperson15,000–25,000 plus incentive22,000–40,000 plus incentiveIncentive on closed sales works better than a flat rise
Delivery driver15,000–22,00018,000–28,000Needs a valid licence and clean record
Assembly and installation worker14,000–22,00018,000–28,000Trained; the customer sees him in their home
Designer or 3D visualiser20,000–35,00028,000–55,000Freelance per-project rates are common

Remember the costs beyond salary: provident fund and ESI where they apply, bonus, overtime and a tools allowance for carpenters who bring their own. Ask your CA which labour-law registrations apply once you cross headcount thresholds; these differ by state and keep changing.

Where to find carpenters, finishers and the rest

  • Existing workshops and sawmill areas. Furniture clusters, such as the markets in cities known for timber and woodwork, have carpenters who work by the day. Ask the timber depot owner whom he supplies, because he knows who pays on time and who finishes well.
  • Carpenters from Rajasthan, Uttar Pradesh and Punjab belts and Kerala are common in many cities; ask for a past employer you can phone, not a photo album.
  • ITI and polytechnic carpentry trades. Fresh trainees are cheaper and trainable but need a senior to supervise.
  • Interior-fit-out contractors. Their crews idle between projects and know laminates and hardware. Work with the contractor, not behind his back.
  • Furniture hardware dealers. Hinge and channel suppliers meet every carpenter in the area and will often name good ones.
  • For showroom staff: home-décor and mattress retail, and building-material shops, have people who sell on fit and feel, not price alone.

Do not poach the crew from a workshop you buy timber or boards from; word travels and so do supply terms.

Vetting tasks that show the skill

Pay for the task, and keep the offcuts and samples as reference standards for the workshop.
RoleA paid half-day taskWhat you check
Head carpenterGive a drawing of a simple side table with drawer and ask for a cut list and the sequence of workDoes he read dimensions, allow for edge tape and kerf, order the work sensibly?
CarpenterBuild a small box with a mitred or dovetailed corner and a hinged lidSquare, tight joints, clean glue lines, no chip-out
FinisherFinish three offcuts: one stain, one PU clear, one coloured lacquerEven coverage, no runs, correct sanding between coats, shade match
SalespersonRole-play a buyer who wants a 6-seat dining table for a small roomAsks measurements, suggests sizes, explains finish and warranty without overpromising
Assembly workerAssemble a flat-pack wardrobe from the instructions, timedReads instructions, protects floors, aligns doors
DriverTest route with a load of padded furniture and strap-down checkCareful with corners, secures loads, calm at narrow lifts

Keep a golden sample of each key finish and joint in the workshop. New hires match the sample, not your description.

Salaried, piece rate or contract workshop

Furniture has all three, and they suit different jobs.

ArrangementBest forRisk
Monthly salarySupervisor, finisher, salesperson, drivers, assemblersFixed cost in quiet months; needs steady orders
Piece or job rateCarpenters on repeat designs, upholsterersRushed work if the rate is tight; agree a quality rejection rule
Contract workshopPeak orders, specialist work like carving or caningLess control over quality and delivery dates
Freelance designer or visualiserRenders, drawings, catalogue photosFiles and rights; get designs and CAD files in writing

Whatever the arrangement, put it in writing: scope, rate, payment day, notice period, whether tools are provided, who bears the cost of rework, and confidentiality for your designs. For regular staff, confirm provident fund, ESI, minimum wage, bonus and Shop & Establishment rules with your CA or the state labour department. This is not legal advice.

Keeping the crew and managing mistakes

  • Pay on a fixed day. Carpenters leave first over late pay.
  • Advance with care. Loan advances tie a worker down but become disputes; keep a written record.
  • Safety is a hiring issue. Guards on saws, dust masks and no loose clothing near blades. A workshop injury costs a worker and a month.
  • Rework rule. Agree before the first order who pays for a wrong cut or a ruined polish: the maker, the supervisor or the business, and how it is recorded.
  • Training for delivery staff. Teach them how to carry, protect floors, assemble neatly and talk to customers.
  • Track by piece. Note who built and who finished each order, so quality problems lead to learning, not blame.

See what to buy for the machines your crew will use and the software page for tracking jobs through the workshop.

Before you hire anyone

More on starting a furniture business

Questions people ask

How many people do I need to start a furniture workshop?

A small workshop usually starts with a head carpenter, a finisher, two carpenters or helpers, and a showroom salesperson, so roughly 5 to 8 people including the owner. Delivery can be hired per trip at first. A retail-only business with contract makers can start with a coordinator and one salesperson.

How much do carpenters earn in India?

As an estimate, a skilled carpenter earns roughly ₹20,000–32,000 per month in a tier-2 city and ₹26,000–42,000 in a metro, often paid by the day or per piece. Finishers and head carpenters earn more. Rates vary a lot by region and skill, so ask local workshops before you set offers.

Should I pay carpenters monthly or by piece?

Pay supervisors, finishers and drivers monthly, and use piece rates for carpenters on repeat designs. Piece rates raise output but can push speed over quality, so agree a clear rule for rejected work. Contract workshops suit peak periods or specialist jobs like carving and caning, where control is lower.

How do I test a carpenter before hiring?

Give a paid half-day task: a small box with a mitred or dovetail corner and a hinged lid. Check squareness, joint tightness, glue lines and chip-out. For a head carpenter, give a drawing and ask for a cut list and work sequence. A phone call to a past employer is worth more than a portfolio.

Do I need a designer from the start?

No. Most small furniture businesses use the owner or head carpenter for drawings at first. Hire or freelance a designer or 3D visualiser when custom orders and catalogue renders take more of your time than selling does. Get design files and rights in writing so the work stays with the business.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert