Buy the things that protect and measure the metal before anything that decorates the shop: a rated safe or strongroom, a precision scale, a way to test the purity of old gold, CCTV and insurance. Then buy stock in small weight bands, and push as much of the slow-moving range as you can onto an on-approval basis from suppliers.
As a ballpark, a small gold and silver store of 250–400 sq ft needs ₹6–18 lakh for security, equipment and fit-out before any stock, and most of the money goes on the safe, the glass and the lighting. The costly mistakes are heavy bridal sets bought up front, a purity machine you cannot keep busy, and a showcase that looks grand but has no stock behind it on the day a family walks in.
Protecting the metal: safe, CCTV and cover
Gold is the one stock a thief can carry in a pocket, so a jeweller's first purchase is where it sleeps at night. Treat the security budget as a fixed cost of holding stock, not as an extra. Insurers and landlords will both ask what you have installed.
| Item | Estimated cost | What to check |
|---|---|---|
| Fire-resistant safe (or a fixed strongroom door for larger stock) | ₹40,000–2.5 lakh for a safe; ₹3–10 lakh for a strongroom | Fire rating, lock type, and that it is bolted to the floor or wall; a small safe can be carried away whole |
| CCTV: 8–16 cameras, DVR or NVR with 30+ days storage, remote viewing | ₹40,000–1.5 lakh | Cameras on the door, each counter, the weighing bench and the safe; a clear frame of the customer's face at the till |
| Burglar alarm with door, glass-break and motion sensors, linked to a monitoring service or your phone | ₹15,000–60,000 | Shutter and rear-wall sensors matter more than the front glass |
| Jeweller's block insurance (stock on premises, in transit, and cash) | Often priced as a percentage of the sum insured; ask two insurers for quotes | Which items are excluded, how stock is valued (rate on the day or purchase), and what the conditions are on safe and alarm |
| Fire extinguishers, smoke detector, a metal-detector wand for the door if you want one | ₹5,000–25,000 | Showroom wiring is a fire risk once lighting is heavy |
Two habits cost nothing: count gold at open and close every day, and never let a single person hold the safe key and the stock register alone. A cheap CCTV system with a gap in coverage over the safe is worse than none, because it gives false comfort.
Weighing and testing: the instruments behind every bill
The price on a gold invoice is net weight multiplied by the day's rate, so the scale is the cash register. A scale that drifts by 0.05 g a piece quietly costs you or your customer money across hundreds of sales.
- Precision counter scale (0.01 g resolution) for sales across the counter, roughly ₹6,000–25,000 as an estimate. Choose one with a glass draught shield and keep it away from the fan. Weighing equipment used for trade generally has to be verified and stamped under Legal Metrology rules in your state; confirm the process locally before opening.
- A second, higher-resolution scale (0.001 g) for small items, stones and nose pins, about ₹15,000–45,000, plus a set of calibration weights so you can check both scales yourself each morning.
- Purity testing for old gold. The old-style route is a touchstone, test needles and acid, which is cheap (a few thousand rupees) but depends on a trained eye and gives an approximate karat. The modern route is a handheld or benchtop XRF analyser, roughly ₹6–20 lakh as an estimate, which reads the alloy without damaging the piece. Fire assay at a recognised centre is the reference method.
- Stone and diamond tools: a 10x loupe, tweezers, a diamond tester and a moissanite tester, about ₹3,000–15,000 together. For certified diamonds, buy from sources that supply a lab report and match the report number to the girdle inscription.
- Ring sizer set (mandrel and gauge) and a bangle sizer for custom orders, under ₹3,000.
- Tag printer and tags that carry gross weight, net weight (stone weight deducted), purity and HUID, about ₹8,000–20,000 for a thermal printer.
On XRF versus a lab: if you expect only a few old-gold exchanges a week, do not buy the machine at the start. You can have buyer-supplied pieces tested at a BIS-recognised assaying and hallmarking centre, and run your own rough check at the counter. Buy the analyser when exchange volume is steady enough to pay for it and your staff agree on what the reading means.
Hallmarking itself is done at a BIS-recognised assaying and hallmarking centre, not in your shop. You do not buy hallmarking equipment; you register as a jeweller with BIS and send pieces to the centre. See the hallmarking and registration section of the playbook, and confirm current rules with BIS or a CA.
Showcases, lighting and the trust corner
Jewellery sells on light and on being able to hold a piece in a calm space. Spend on the glass counter and the lighting, and keep wall decor modest.
| Item | Estimated cost | Notes |
|---|---|---|
| Glass counters with locks, velvet trays and busts (10–14 ft of counter) | ₹1.5–6 lakh | Lockable trays you can lift in and out of the safe each night save more time than extra counters |
| Spot lighting with a neutral-to-warm colour temperature and high colour rendering | ₹40,000–1.5 lakh | Cheap cool-white LEDs make gold look grey and stones flat; test a piece under the bulb before buying 40 of them |
| Consultation table with two seats, a mirror and a cloth-lined weighing corner | ₹30,000–1 lakh | Bridal and gift buyers decide at a table, not at a counter; weighing in front of them is the trust moment |
| Display: neck busts, ring cushions, bangle stands, earring cards | ₹30,000–80,000 | Buy a small set in one colour family; refresh after the first season |
| Packaging: boxes, pouches, carry bags, invoice folders | ₹30,000–1 lakh for a first run | Plain, sturdy boxes outdo fancy ones that scuff; a printed purity and weight card inside is the real value |
A weighing and billing corner where the customer can see the display on the scale is the cheapest trust feature a showroom can have. Put the bill printer and a printed copy of the day's rate on the same table.
Stock: how much to own and how much to borrow
Stock is where the capital goes, and the gold rate can move your stock value by several percent in a week. Split it into what you own outright, what you hold on approval, and what you make only when ordered.
| Type of stock | Typical share of the display | How it is held | Risk to you |
|---|---|---|---|
| Light daily wear: chains, small studs, rings, nose pins, kids' items | Largest share by count, smaller by weight | Owned; reorder as it sells | Low; sells year-round and melts back into stock at the metal value |
| Mid-weight fast sellers: bangles in pairs, mangalsutra, lightweight sets | Medium | Owned, with a few designs on approval | Medium; design fashion shifts |
| Heavy bridal and temple sets | Show a few; make most to order | On approval from the wholesaler, or taken against a customer deposit | High if owned; the capital sits for months |
| Diamond and stone pieces | Small, certified | On approval from a diamond dealer where possible | High; price per piece varies and resale is slower |
| Silver: anklets, pooja items, gifts | Small to medium | Owned; quick to turn | Low; tarnish control matters |
Many wholesalers and manufacturers will give a new retailer stock on approval, meaning you display it and pay on sale, or return it within an agreed period. Ask for this before you spend your own cash on heavy sets. The suppliers page covers terms and what to watch in them.
Count stock by gross weight, net weight, purity, tag number and HUID where applicable, and reconcile to the safe register every day. Small items below 2 g and traditional kundan, polki and jadau work are generally exempt from compulsory hallmarking, but still tag them; confirm the current exemptions with BIS before relying on them.
What not to buy yet
- An in-house workshop (melting furnace, rolling mill, polishing motor, setting bench). It needs trained karigars, supervision and a way to account for process loss. Start with job work from outside karigars.
- An XRF analyser unless old-gold volume is already steady.
- Full bridal sets and heavy temple pieces as owned stock. Take them on approval or against a deposit.
- Large lab-grown or natural diamond stock without a certified source and a clear buy-back or return term.
- Branded displays and a premium façade before the first year of sales; spend on lighting and security first.
- A custom e-commerce site before you have a catalogue you can photograph consistently. A catalogue on WhatsApp and Instagram is enough for the first season; see the software page.
If you plan to sell mainly online, the equipment list changes: a light box, a macro-capable camera or phone rig, a scale on the shooting table, tamper-evident packaging and insured courier. Our jewellery website guide covers the storefront side, and the concept build Karatly shows how a price breakdown can be presented.
Paying for it
More on starting a jewellery business
- Start hereThe full playbook →Models, licences, startup costs and the steps to your first customer.
- Go deeperGetting customers →Festival calendar, price transparency, exchange, referrals and the first 10 buyers for a new jeweller.
- Go deeperFinding suppliers →Bullion, wholesalers, karigars and diamond dealers: where to find them, terms to agree and red flags.
Questions people ask
How much does it cost to set up a small jewellery shop before stock?
Roughly ₹6–18 lakh for a 250–400 sq ft store, as a planning estimate. The safe, CCTV, alarm, glass counters and lighting take most of it, and deposits and rent come on top. Stock is separate and usually bigger. Get quotes for security equipment and insurance before you commit to a lease.
Do I need an XRF machine to buy old gold?
No, not at the start. A touchstone and acid kit or a basic karat tester can be used by a trained person for a rough check, and you can send disputed pieces to a BIS-recognised assaying and hallmarking centre. Buy an XRF analyser once you buy old gold often enough to justify the cost.
Do I need to buy hallmarking equipment?
No. Hallmarking is done at a BIS-recognised assaying and hallmarking centre. A jeweller selling hallmarked gold registers with BIS and sends pieces there, and each piece gets a six-character HUID. Confirm current registration steps and exemptions on the BIS site or with a CA, since the rules have been updated several times.
Should I own all my stock or take it on approval?
Own the light, fast-moving pieces and ask for heavy bridal and diamond pieces on approval where you can. Owned heavy stock ties up lakhs and carries gold-rate risk. Approval terms depend on the supplier and your track record, so agree return periods and who bears loss and insurance in writing.
Do I need insurance from day one?
Yes, arrange it before the first gram arrives. A jeweller's block policy usually covers stock in the shop, in transit and sometimes cash, subject to conditions on safes and alarms. Premiums depend on stock value and location, so ask at least two insurers for a quote and read the exclusions closely.
