Service job software gives every repair, installation or site visit its own job card: who the customer is, what is wrong, photos, the estimate they approved, who is working on it and what parts went in. When the job is done the card becomes the invoice, and the warranty and next service date are already on record, so the customer hears from you before they think of calling someone else.
What it involves
A job card is the paper slip a garage, mobile repair counter or AC service company writes when work comes in. It carries the customer's name and number, the device or vehicle, the complaint, and later the parts fitted and the amount. Service job software keeps that same card, but on a phone, where everyone who touches the job can see it and add to it.
Each card moves through clear stages: received, estimate shared, approved, in progress, waiting for parts, ready, delivered and paid. Front desk staff open the card, a technician picks it up, the store hands out parts against it, and the counter closes it with a bill. Nobody has to ask around to find where a job stands.
Once a job is closed, it is not forgotten. The warranty period, the AMC visit schedule or the next service date sit on the customer's record, and reminders go out when they fall due.
What it is not
- Not a scheduling app for appointments alone. It follows the work itself: diagnosis, parts, time, approval and payment.
- Not a replacement for your technicians' judgement. It records what they find and do; it doesn't diagnose faults.
- Not a full accounting system. Invoices from jobs can flow into accounting and billing, which keeps the books.
Why you need it
Service businesses lose money in small, quiet ways. A customer drops off a mixer grinder and the slip goes missing. A technician fits a capacitor from the van and forgets to mention it. An estimate is agreed on the phone, the bill comes out higher, and the customer disputes it. A washing machine repaired under warranty comes back, and nobody can show what was done last time.
None of this is carelessness. It happens because the information about a job is split across a register, a few WhatsApp chats, the technician's memory and the counter's bill book. Putting it on one card that travels with the job closes those gaps, and turns finished work into repeat work through reminders.
You need this if
- Customers call to ask "is my job ready?" and staff have to go and check.
- Parts leave the store or the van without being written against a job.
- You've had arguments over what the customer approved before work started.
- Technicians are given jobs by phone, and you only learn the outcome in the evening.
- AMC visits are tracked in a diary, and some get missed until the customer complains.
What doing without it costs you
Parts that never reach a bill
Every part fitted but not recorded is stock you paid for and gave away. Over a month, it adds up to a real dent in margin.
Disputes over the amount
Without a written estimate the customer approved, a higher final bill turns into a discount you didn't plan to give.
Lost repeat business
A customer whose AC was serviced in March needs it again before summer. If nobody reminds them, the next technician they find gets the job.
Owner as the dispatcher
When every job assignment and status check runs through the owner's phone, the business can't grow past what one person can track.
How it helps
One card per job, from intake to payment
Customer, device or site, complaint, photos, estimate and every update, in one place everyone can see.
Written approval before work starts
Send the estimate on WhatsApp; the customer's approval is recorded on the card with the time it came in.
Technicians know their day
Jobs are assigned with address, contact and history. They update status from the site, with photos.
Every part and hour on the bill
Parts are issued against the job card and labour time is logged, so the invoice reflects what was actually done.
Customers hear before they ask
Status messages go out at the stages you choose: received, approved, ready for pickup, completed.
Warranty and service due, remembered
Each job sets its own warranty end and next-service date, and the reminder goes out on time.
Before and after
| Area | Before | With service jobs and job cards |
|---|---|---|
| Taking in a job | A carbon-copy slip or a line in a register | A job card with photos, opened in a minute on a phone |
| Estimate approval | Agreed on a call, remembered differently later | Sent on WhatsApp, approval stored on the card |
| Assigning work | Phone calls from the owner each morning | Jobs assigned on screen, technicians see their list |
| Parts used | Taken from the shelf or the van, written down sometimes | Issued against the job, added to the bill automatically |
| Job status | "Let me check and call you back" | Status visible to staff, with updates sent to the customer |
| After the job | Nothing until the customer calls again | Warranty tracked and service reminders sent on schedule |
What's inside
Every part below is available from day one. We turn on the stages, fields and messages your kind of work needs, and leave the rest off.
Job cards
- Intake in one screenCustomer, phone, address, device or vehicle details, serial or registration number, complaint and accessories received.
- Photos and notesCondition at intake, the fault found, and the finished work, each photo dated on the card.
- Estimates and approvalParts and labour listed, shared as a message, approved or revised before work starts.
- Your own stagesUse our default stages or set your own, such as "sent to company service centre" or "waiting for customer".
Technicians and the field
- Assignment and workloadSee who has how many open jobs and assign or move work in a tap.
- Mobile updates from siteTechnicians start, pause and close jobs, add photos and capture the customer's sign-off on their phone.
- Time on the jobStart and finish times recorded, so labour is billed and long jobs are visible.
- Customer history on handPrevious jobs, parts and warranty for the same customer or device, before the technician arrives.
Parts and billing
- Parts issued against jobsStore or van stock reduces as parts are used, and each part appears on that job's bill.
- Invoice on completionClosing a job produces a GST-ready invoice with parts and labour, sent on WhatsApp with a UPI payment link.
- Advances and part paymentsDeposits taken at intake are adjusted at delivery.
- Warranty jobsRepeat work under your warranty is recorded at no charge, with its cost visible to you.
After the job
- AMC contractsVisit schedule, covered items and contract end date, with visits generated as jobs when due.
- Service-due reminders"Your AC service is due" or "time for the next pest treatment", sent on the date the job set.
- Feedback and reviewsA short message after delivery asks how it went, and happy customers get a review link.
- ReportsJobs by stage, by technician and by type; turnaround times; parts and labour earned per job.
A day with it
Once it's running, each person does the job they already do, and the card fills itself in along the way.
- 01Job inCard opened with photos
- 02EstimateSent and approved
- 03WorkAssigned, parts issued
- 04ReadyCustomer told
- 05Bill and payInvoice, UPI or cash
- 06Follow-upWarranty and service due
Front desk or call handler
- Open job cards for walk-ins and calls
- Send estimates and record approvals
- Answer status questions from the screen
Technician
- See today's jobs with address and history
- Update status and add photos from site
- Record parts used and time spent
Store or service manager
- Assign and rebalance jobs
- Issue parts against job cards
- Chase jobs that are stuck in one stage
Owner
- See open, delayed and finished jobs at a glance
- Check what each job earned after parts
- Watch AMC renewals and repeat work
How it fits your line of work
The software is the same; what you track, the rules and the rush hours are not. We set it up for yours.
Food and beverage
Restaurants and bakeries rarely run service jobs themselves, but businesses that service kitchens do: equipment repair, exhaust cleaning, cold-room maintenance.
Kitchen equipment repair
Ovens, fryers, chillers and coffee machines each get a card with model, fault and parts, at the client's site.
Scheduled cleaning contracts
Exhaust and duct cleaning on a fixed cycle, with each visit logged and the report shared.
Emergency call-outs
A chiller down before dinner service is flagged urgent and visible to the whole team.
Watch out If you run a restaurant and want to track your own equipment's repairs, equipment and maintenance is the better fit.
Shops and retail
Mobile, electronics, watch and appliance shops take in repairs at the counter, often alongside sales.
Counter intake with accessories
Charger, cover, SIM or box noted at intake, so returns are never disputed.
Sent-out repairs
Devices sent to a company service centre or specialist are tracked with dates out and back.
Sale warranty claims
A product bought from you and brought back under warranty is linked to its original sale.
Watch out Ask customers to remove passwords or give a test code at intake, and record it on the card rather than on a slip of paper.
Clinics and health
Biomedical engineers and dealers who service clinic and lab equipment need clear records of every visit.
Equipment-wise history
Each machine at each clinic has its own history of faults, parts and visits.
Preventive visits
Calibration and service visits generated from the contract and confirmed with the clinic.
Service reports
A signed visit report with readings and photos, shared with the clinic the same day.
Watch out Some medical equipment has manufacturer or regulatory servicing requirements. We record what you do; your contracts and the manufacturer set what must be done.
Salons, spas and gyms
Gym equipment servicers, salon chair and spa equipment technicians work across many client sites.
Multi-site clients
A gym chain's outlets each have their own equipment list and visit history.
Wear parts tracked
Belts, cables and pads that are replaced often are recorded, so you can quote AMCs accurately.
Downtime noted
When a treadmill is out of order, the client can see when it's expected back.
Watch out Agree up front which parts an AMC covers and which are billed extra, and put that on the contract record so technicians don't have to guess.
Schools and coaching
Service providers for schools and coaching centres handle computer labs, projectors, CCTV, water purifiers and generators.
Visits around timetables
Jobs scheduled for holidays, weekends or after school hours, with a contact person per campus.
Bulk device jobs
Forty lab computers serviced in one visit, each with its own line on the card.
Annual contracts
AMC renewals timed before the academic year, when schools set budgets.
Watch out Schools often need a quotation approved by a committee. Keep the approval and purchase order attached to the job before work starts.
Home and local services
AC and appliance service, plumbing, electrical, pest control, RO purifiers and installers are the core of this software.
Doorstep jobs by area
Jobs grouped by locality so technicians spend less time travelling between calls.
Treatments on a cycle
Pest control and RO servicing follow fixed intervals; each visit is created and reminded automatically.
Bill and collect on site
Technicians close the job, send the bill and take UPI or cash before they leave.
Watch out Cash collected by technicians should be handed over and matched daily. The software shows who collected what, so the evening count is quick.
Distributors, traders and makers
Machine dealers, installers and maintenance contractors serve factories and offices with longer, larger jobs.
Installation projects
A job with several visits, materials and sign-offs, tracked as one card with stages.
Breakdown response
A client's machine down means lost production; urgent jobs and response times are visible.
Contract billing
Monthly or quarterly AMC invoices raised on schedule, with extra parts billed separately.
Watch out Clients often want their purchase order number and site details on every invoice. We set these as required fields so bills don't bounce back.
Stays and travel
Firms that maintain hotels, homestays and resorts handle many small jobs per property: AC, geysers, plumbing, pools and generators.
Room-wise jobs
A card per room or area, so the property knows which rooms can be sold tonight.
Seasonal servicing
Pre-season AC and geyser servicing created as a batch of jobs for each property.
Property history
Repeated faults in the same room show up, so you can suggest a replacement instead of another repair.
Watch out Properties usually have a duty manager who must sign off a job as done. Capture that sign-off on the card to avoid billing disputes.
Getting started
It starts with a free demo. If it fits, we set it up for your business, bring your data in and train your team. You don't configure anything yourself.
- 30–45 minutesDemo
We walk a job from intake to bill using a fault common in your line of work.
- 2–4 daysSetup
Job types, stages, rate list, message templates, users and permissions.
- 1–3 daysOpen jobs and AMCs moved in
Jobs in progress and contracts with their next visit dates are brought over so nothing is missed.
- 2–3 daysTechnician training
Short sessions on the phone app; most technicians are comfortable after a handful of jobs.
- End of the first monthFirst full month
We review stuck stages, missed parts and reminders with you, and adjust.
Typical ranges; a bigger team, more outlets or messy old records take longer.
What we need from you
- The kinds of jobs you do, and the stages each one moves through
- Your rate list for labour and common parts (a photo of your rate card is enough)
- Your technicians and staff, and what each should be able to see
- Current open jobs and active AMC contracts, from your register or a spreadsheet
- Your bill format and GSTIN, if you're registered
Price: fixed after the demo, based on the parts you use, your outlets and how many people log in. The demo is free.
Is it right for you?
A good fit if
- You handle more than a few jobs a day, or have two or more technicians
- Parts are used on jobs and you suspect some never get billed
- You run AMCs or work that repeats on a cycle
- Customers regularly call to ask about job status
Not yet if
- You do all the jobs yourself and see every customer in person; a notebook may still be enough
- Your work is mostly booked time slots without parts or estimates; appointments and bookings may suit you better
Works with
Everything shares one list of customers, staff and items, so you enter things once.
- Field team and sales visitsTechnicians' routes, check-ins and visits alongside their jobs.
- Stock and purchasingParts issued to jobs reduce stock and trigger reorders.
- Accounting and billingJob invoices and collections flow straight into the books.
- Customers and WhatsAppEvery customer's jobs, reminders and messages in one list.
- ReviewsTurn finished jobs into reviews from happy customers.
Questions people ask
Do my technicians need smartphones?
Yes, an ordinary Android phone with mobile data is enough. If a technician can't use the app, the front desk can update their jobs for them.
Can customers see the status of their job?
They get WhatsApp messages at the stages you choose, such as received, estimate ready, ready for pickup and completed. They don't need to install anything.
What if the customer doesn't approve the estimate?
The card records the refusal, any inspection charge you apply, and when the item was returned. It stays in the history in case they come back.
How are parts from a technician's van handled?
Each van can be set up as its own small store. Parts used on a job come off that van's stock, and you can see what each van should be carrying.
Can it handle AMCs with fixed visits?
Yes. You enter the contract, what it covers and how often visits happen. Visits are created as jobs when due, and renewal reminders go out before the contract ends.
Can I use my own job stages?
Yes. We start with a standard set and change the names and order to match how your workshop or team actually works.
Does it make GST invoices?
Yes. Closing a job produces an invoice with parts and labour, using the tax rates your CA confirms during setup.
Who owns the job and customer data?
You do. You can export jobs, customers and history at any time, and we only use the data to run your account.
What does it cost?
That depends on the number of technicians, branches and the parts you switch on. You get a fixed price after the demo, before any setup begins.