Who to hire · solar installation business · 5 min read

Who to hire for a solar installation business in India

Who a rooftop solar installer hires in India: licensed supervisor, survey engineer, installation crew, DISCOM liaison and AMC technician, with pay ranges.

Planning this? Ask an expert, free ↓
Voltride electric scooter subscription and smart battery swap
Runs on Voltride · EV scooter

Part of the playbook: How to start a solar installation business in India

Hire a licensed electrical supervisor first, then a survey and design engineer, then a trained installation crew. Everything else, such as DISCOM liaison, accounts and AMC technicians, can start as part of someone's role or be bought in per task. Most rooftop installers are three to eight people for a long time, so the order and the contracts matter more than the headcount.

Pay figures below are monthly estimates for 2026 and vary by city and experience. Labour, licence and contract rules differ by state, so confirm locally.

The roles in the order you actually need them

A sensible hiring order for a residential-first installer. Thresholds are rules of thumb, not data.
OrderRoleWhat they ownWhen
1Licensed electrical supervisorThe licence that lets your firm do electrical work, plus on-site safety and final connectionsBefore the first job, if you are not licensed yourself
2Survey and design engineer (often a diploma or B.E. in electrical)Site survey, string design, bill of materials, proposals, shading judgementWithin the first few jobs, if you are not an engineer
3Installation team lead and two to three helpersStructure assembly, panel mounting, cable routing, earthingWhen you have two or more jobs a month
4DISCOM and portal liaisonApplication entries, follow-up at the DISCOM office, meter and inspection datesWhen paperwork starts delaying commissioning
5Sales and customer executiveHome visits, quotes, follow-ups, referralsWhen the owner can no longer both sell and supervise
6AMC and service technicianPanel cleaning rounds, inverter faults, annual checksOnce about 40 to 60 systems are under contract (an estimate)
7Accounts and storesGST invoices, supplier payments, serial-number stock registerWhen volume gets past what you can keep in sheets

If you come from an electrical background, you may hold roles 1 and 2 yourself and hire only the crew. If you come from sales, hire the licensed supervisor and engineer first and pay them well; the cost of one wiring mistake exceeds a year of the salary difference.

What each role is paid

Estimated monthly pay in ₹ for 2026; not survey data. Ask local installers and job boards for current rates.
RoleMetroTier-2 cityNotes
Licensed electrical supervisor₹35,000–60,000₹25,000–40,000Many are part-time consultants for several firms; confirm the licence is valid in your state
Design and survey engineer₹30,000–55,000₹20,000–35,000Fresh graduates with solar-design course training are cheaper but need a senior to review designs
Installation team lead₹22,000–35,000₹16,000–26,000Skilled, experienced at height
Installation helper₹14,000–20,000 per month, or ₹600–900 a day₹11,000–16,000 per month, or ₹450–700 a dayDaily-wage helpers are common; training and safety kit are your cost
DISCOM liaison₹20,000–32,000₹14,000–24,000Knowledge of your DISCOM's portal and field staff matters more than a degree
Sales executive₹18,000–30,000 plus incentive₹14,000–22,000 plus incentiveIncentive per kW sold works better than a pure salary
AMC technician₹16,000–26,000₹12,000–20,000Needs a bike and a phone allowance

Where to find solar-specific people

  • Local electricians and wiremen already working on residential jobs. Teach them DC safety and structure work rather than hiring cold.
  • ITI and polytechnic electrical departments, where final-year students often seek apprenticeships. Apprenticeship rules and stipends are set under the Apprentices Act; confirm the current process locally.
  • Solar skilling courses: training programmes such as the Suryamitra scheme and NSDC-linked Skill Council for Green Jobs courses have existed; their current status and fees are unverified, so check before relying on them.
  • Larger EPC firms and former employees who know commercial-scale practice; some freelance between projects.
  • Supplier and inverter-maker service engineers, useful for commissioning training, sometimes available as freelance support.
  • Local job groups on WhatsApp and Facebook, where crew leaders list their availability.

Vet them with a task, not a CV

Solar skills show up in how someone handles a real connector or a real roof. A short test, paid for their time, saves months.

  • Installer test: give them an MC4 pair, a cable and the crimper. Watch crimp, seat and pull-test. Ask why a crimped lug on an earth strip must be tight and tinned if needed.
  • Supervisor test: show a single-line diagram of a 3 kW system and ask where the DC isolator, SPDs, MCBs and earthing connect and why.
  • Engineer test: give them a customer's six-month bill history and a roof photo, ask for a proposed system size and the questions they would ask the customer. Look for shading and sanctioned-load awareness, not a rushed number.
  • Height check: observe how they set up the harness and anchor, and whether they ask about the roof surface. Do not hire anyone who treats the harness as optional.
  • Reference call: ask a previous employer about attendance and honesty on site; materials walk off in this trade.

Salaried, daily wage or freelance

ModeGood forRisk and tip
Salaried with PF and ESI as applicableSupervisor, engineer, liaison, salesStatutory contributions depend on headcount and wage thresholds; confirm with a CA or labour department
Daily-wage helpersInstallation labour on busy weeksSafety training and insurance still apply; keep attendance and payment records
Per-kW or per-job piece rate to a crew contractorMounting and cablingQuality varies; hold a retention (for example 10 percent for 30 days, an illustrative term) until commissioning
Freelance design or consulting engineerCommercial designs and electrical sign-offAgree who owns the drawings and who is liable for errors in writing
Outsourced AMC contractorCustomers outside your usual areaWarranty responsibility stays with you; define response times

Employment classification, contractor liability and labour registrations vary by state. Confirm with the labour department and a CA. This is not legal advice.

Contracts and habits that protect you

  • Written appointment letter with duties, pay, notice period and a clause on handling customer data and materials.
  • Safety undertaking: crews sign that they have been briefed on harness use, DC hazards and lock-out practice.
  • Material accountability: every module and inverter serial number goes into a register against a job; any shortage is traced to a site.
  • Non-solicitation: an engineer who leaves with your customer list is a common loss. A clause helps but enforceability varies, so take legal advice.
  • Training budget: a day of manufacturer or supplier training for every new team lead is cheap insurance.

Once a crew is stable and you are chasing leads, see how to get solar customers for the demand side, and the playbook overview for where hiring fits in the first year.

Before you hire anyone

More on starting a solar installation business

Questions people ask

Do I need to be an electrical engineer myself?

No, but your firm needs the right electrical contractor licence and a qualified supervisor, as required by your state's electrical licensing authority. Many founders come from sales or trading and hire a licensed supervisor and an engineer. Confirm the exact licence conditions with the electrical inspectorate or licensing board in your state before taking jobs.

How many people do I need for a three-kilowatt home installation?

A common crew is a team lead and two or three helpers for one to two days, with a supervisor visiting for connection and testing. Exact numbers depend on roof access, structure type and weather. Keep a minimum of two people at height at all times, and never send one person to a roof alone.

Should I train fresh helpers or hire experienced ones?

Do both. Hire an experienced team lead who has worked on solar or electrical sites, and train helpers from local ITI students or electrician apprentices. Pay for safety gear and proper training, because injuries and badly crimped connectors cost far more than the training. Check apprenticeship rules locally before enrolling anyone.

Is it safer to subcontract installation to crew contractors?

It saves fixed cost but reduces control over quality and safety. If you subcontract, pay per job with a retention until commissioning, supply the critical items like connectors yourself, inspect every site before sign-off, and remember that warranty and customer responsibility stay with you, not the contractor.

What is a fair incentive structure for sales staff?

Pay a modest base plus an incentive per kW installed rather than per lead, so staff care about jobs that complete and get connected. Many installers pay after the customer's final instalment. These are practices, not rules; adjust to your margins and write the terms down before the first sale.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert