Your supplier is one licensed packaged drinking water plant, and you should pick it as carefully as a restaurant picks its kitchen. Look for a valid FSSAI licence, recent lab reports from an accredited lab, a clean can-washing and filling area, and an honest answer on where its water comes from. Then sign terms in writing and keep a second plant on call.
This page covers how to find plants, a half-day visit checklist, the documents to ask for, what the rules say about certification and groundwater (and what I could not verify), trade terms to negotiate and the red flags that should end a conversation. The playbook covers licences for your own side of the business.
Where to find plants and how to shortlist them
- District industries centre (DIC) and MSME listings: many small plants register as micro or small units; the local DIC office can point you to registered ones in the district.
- Industrial estates and MIDC or SIDCO-type areas: plants often cluster in an industrial zone; ask at the estate office or a nearby tea shop.
- Other distributors, kirana shops and office admins: ask who supplies their cans and whether delivery has been reliable through last summer.
- Brand agency offices: larger brands appoint area distributors; a brand's regional office can say if your pocket is open.
- Water-plant equipment dealers: the people who sell RO and filling machines know which plants in the district run steadily.
- FSSAI licence verification: you can check a licence number on FSSAI's FoSCoS portal, which is the starting point for any shortlist.
Visit three plants within about an hour's drive of your godown. Longer drives cost you in diesel, time and warm water in summer. Ask each for their trade price per can, minimum take, swap policy on cans, credit days and how much they can supply in April–June when demand peaks.
What the rules say, and what I could not verify
Three rule sets touch a packaged water plant: food safety (FSSAI), product standards (BIS) and groundwater use. Each has been revised in recent years, so a plant's papers from two years ago may no longer be the whole picture.
| Area | What I found | How sure |
|---|---|---|
| FSSAI licence | A plant selling packaged drinking water must hold an FSSAI licence for a food business; you can check the number on FoSCoS | Widely documented; confirm the current licence band with FSSAI |
| BIS standards | IS 14543 is the standard for packaged drinking water and IS 13428 for natural mineral water; many plants still work to them and show the mark | Standards named in several sources; confirm the current edition with BIS |
| BIS certification as mandatory | Reports say mandatory BIS certification for packaged water was removed from the FSSAI regulations in October 2024, with the standards still used as benchmarks | From secondary sources; I haven't read the FSSAI notification itself |
| High-risk food category | Reports say FSSAI classified packaged drinking water and mineral water as high risk in November 2024, with inspection before licensing and yearly third-party audits for central licence holders | From secondary sources; confirm with FSSAI |
| Groundwater NOC | The Central Ground Water Authority's September 2020 guidelines are reported to require a groundwater NOC for packaged drinking water units, with limits in over-exploited areas; states may run their own authority | Reported by an audit report and consultants; check the current text and your state's rule |
Practically, the label and the paperwork matter more than a rule you read online. Ask for the FSSAI licence number and validity, the BIS licence number if the plant displays the mark, the groundwater NOC or state approval, the pollution control board consent and the latest lab report. A plant that has all five and is happy to hand over copies is a good sign. A plant that gets vague or cites a 'pending' approval is not.
I did not verify the exact TDS and microbiological limits in the current IS 14543 edition or any later FSSAI testing order. Ask the plant which standard it works to, read that standard or have a consultant do it, and do not quote limits to customers unless they are on your plant's report. This is not legal advice.
A half-day plant visit: what to look at
- Source and treatment train: ask where the raw water comes from (borewell, municipal, tanker), what each stage does (sediment filter, carbon filter, RO membrane, UV or ozone) and when filters and membranes were last changed. A plant that keeps a dated maintenance log is a good sign.
- Can-washing line: returned cans should be rinsed, scrubbed, sanitised and rinsed again before filling. Look at the brushes, the sanitiser used and whether washed cans are stored upside down away from dust.
- Filling and capping area: it should be enclosed, with staff in clean clothes and caps and a visible tamper seal or shrink sleeve applied to every can.
- Batch codes and dates: every can should carry a batch code and a packing date; ask what the plant does if one batch fails a test.
- Testing on site: a TDS meter and pH meter in daily use, plus a schedule for third-party lab tests. Ask to see the last three reports and check the lab name and the test date.
- Storage of filled cans: cans should not stand in the sun or on the wet ground before loading.
- Staff health and hygiene: ask about medical checks for people handling cans and caps. Look for a hand-wash point.
Take a phone photo of the can-washing and filling areas, with permission, and write the date on a note. If a quality complaint arrives in October, you can compare today's photos with the plant's claims.
Trade terms to negotiate in writing
| Term | What to ask for | Why it matters |
|---|---|---|
| Rate per full can | A fixed rate for six to twelve months, with a notice period for changes | Plastic and power costs move; a notice clause stops mid-month surprises |
| Can ownership and swap | Whose cans are they, how many are on loan, and how are damaged cans replaced | A branded can loaned to you is a deposit you carry; owning cans gives you freedom |
| Empty can handling | Where empties go, how fast they are washed and how many days of cans the plant holds | Slow plant turnaround ties up your float |
| Seasonal supply | A written minimum daily supply for April–June | Peak demand is when small plants ration cans to the biggest buyers |
| Credit days | Weekly settlement at the start; 7–15 days once you have a record | Most small plants want cash or weekly payment from new distributors |
| Lane exclusivity | No other distributor from the same plant in your pocket | Your difference is service; do not share it with a rival on the same lane |
| Quality failure | The plant takes back a bad batch and reimburses your replacement cost | Customers blame you first; the clause stops you carrying the cost |
| Paperwork refresh | A fresh copy of each licence on renewal | Expired papers make you the seller of an uncertified product |
Ask for a simple supply agreement even if the plant says handshake terms are fine. One page on rates, can ownership, quality failure and notice is enough to start.
Backup supply and the bottling question
Plants fail in summer: a borewell dries, a membrane clogs, a filling machine breaks or an inspector closes a unit. If you have one plant, you have a two-day business. Open an account with a second plant early, buy a small quantity every few weeks to keep the relationship alive, and keep a simple test of its cans against your main plant's.
| Question | Stay a distributor if | Consider bottling only if |
|---|---|---|
| Volume | You deliver under about 200–300 cans a day | You reliably move more than your best plant can supply |
| Capital | You would stretch to find ₹3–8 lakh | You have ₹25 lakh or more of your own to lock into land, plant and approvals (estimate) |
| Paperwork | You prefer a few registrations | You can manage FSSAI, groundwater, pollution consent and annual audits |
| Quality | You want someone else to be accountable | You are ready to hire a trained operator and book lab tests |
Red flags that should end a conversation
- No FSSAI number on the can, or a number that does not verify on the portal.
- A plant that will not let you see the washing area or the lab reports.
- Cans with no batch code, no packing date or a tamper seal that comes off without tearing.
- A price far below the others in the district, especially one that rises after you buy in volume.
- A plant that refuses to put terms in writing, or offers cash-only trade with no invoice.
- A source that is a tanker or an unregistered borewell, and a plant that cannot say where its water is drawn from.
- Complaints from two or three other distributors about cloudy cans, short fills or missing seals.
Whenever a customer reports a bad can, record the batch code and tell the plant that day. A good plant checks the batch and replies within hours. A plant that blames your handling every time is telling you where its priorities lie. The grocery-delivery and milk delivery playbooks have related ideas on running a supplier relationship.
More on starting a water can delivery business
- Start hereThe full playbook →Models, licences, startup costs and the steps to your first customer.
- Go deeperWhat to buy →Cans, vehicle, racks, dispensers and a TDS meter, costed, with what to hold off on.
- Go deeperGetting customers →First ten customers, can pricing and deposits, and keeping flats and offices from switching.
Questions people ask
How do I check whether a water plant is licensed?
Ask for the FSSAI licence number and look it up on FSSAI's FoSCoS portal, then ask for the groundwater approval, pollution control board consent and the most recent lab report. The can label should show the licence number, a batch code and a packing date. If any paper is missing or expired, treat the plant as uncertified until it shows the current copy.
Is BIS certification still mandatory for packaged drinking water?
Reports indicate mandatory BIS certification for packaged drinking water was removed from the FSSAI rules in October 2024, though IS 14543 still serves as the benchmark and many plants keep the mark. I haven't read the notification itself, so confirm the current position with FSSAI or BIS before you rely on it or tell customers.
Does a water plant need a groundwater NOC?
Packaged drinking water units drawing groundwater are reported to need a Central Ground Water Authority NOC under its September 2020 guidelines, with extra limits in over-exploited areas, and states may have their own authority. Ask the plant for its approval and verify the current rule on the CGWA or your state authority's site, because this has been amended.
Should I buy from the cheapest plant?
No. A rate that is much lower than the others in your district usually means shortcuts in washing, testing or sourcing, and the first complaint will fall on you. Compare plants on licences, lab reports, can washing and summer supply as well as rate. A few rupees a can matter less than one bad batch.
How many plants should I work with?
Work with one main plant and keep a second on small regular orders. Summer breakdowns, dry borewells and inspections happen, and a one-plant distributor can lose a week of deliveries. Check the second plant's papers and cans just as carefully, and agree on a swap rate for cans so you can switch fast.
