Buy cans first, then a vehicle that can carry them safely, then the small kit that proves quality. A distributor does not need a purifier or a filling line: the plant treats and fills, and you move full cans out and empties back. Most of the money sits in the can float, the stock of cans you own that is always out with customers.
The water can delivery playbook puts a small start at roughly ₹3–8 lakh. This page breaks that into real items: how many cans to own, what a mini-truck actually carries, what to give an office on deposit, and what looks sensible but only matters if you decide to become a bottler.
Work out your can float before you buy anything
A can is not stock you sell, it is a loop. At any moment some cans are full at the plant or godown, some are on the vehicle, some are at customers' homes and some are empty and waiting to go back. The number you must own is the sum of all those places, so it is always a multiple of what you deliver in a day.
| Where cans sit | Typical share of your cans (rule of thumb) | What controls it |
|---|---|---|
| Full, at the plant or your godown | 10–15% | How much buffer you keep for summer and for a vehicle breakdown |
| On the vehicle | 5–10% | Payload of the vehicle and how many drops per trip |
| Full at customers, waiting to be used | 35–45% | Home customers keep one spare; offices often keep two to three |
| Empty at customers, waiting for collection | 25–35% | How tight your exchange discipline is; this is the figure that quietly grows |
| Empty at the plant, in the wash line | 5–10% | Plant turnaround; ask how many days they hold your empties |
A simple planning rule many small distributors use is to own about three times your average daily cans delivered, then add more as customers with two-can homes join. If you deliver 60 cans a day, think about 180–250 cans in total rather than 60. Check the number against your own weekly count, not this rule.
Cans and caps: what you are actually paying for
Most distributors either use the plant's branded cans on exchange or own plain cans that the plant fills under their own arrangement. Branded cans from the plant are cheaper to start and harder to leave: the cans carry the plant's name, so you cannot switch plants without a swap. Owning cans costs more up front but keeps your options open.
| Item | Estimated cost | What to know |
|---|---|---|
| 20 L PET or polycarbonate can, new | ₹150–350 each | Ask the plant what grade it uses and how many refill cycles it works to; do not expect identical lives from cheap and branded cans |
| Used cans bought in bulk | ₹60–120 each | Cheaper, but cloudy, scratched or smelly cans cannot be sold as clean; inspect a sample under light and by smell |
| Can caps and tamper seals or shrink sleeves | ₹1–4 per seal | A broken or missing seal is the first thing a careful customer checks; budget seals as a running cost, not a one-time buy |
| Printed labels or stickers with your number and the plant's details | ₹2–6 per can | Helps you track a can back to its batch and stops it being confused with another supplier's cans |
| Can handles or carry grips for loaders | ₹30–100 each | Cheap and reduces dropped cans on stairs |
I haven't verified a single national standard for the life of a returnable can. Plants set their own retirement rule, so ask yours in writing how many refills a can is meant to last and when it will be retired and replaced.
Choose the vehicle by cans carried, floors climbed and lane width
A full 20-litre can weighs roughly 21 kg with the can itself. A small goods vehicle rated for about 750 kg therefore carries something like 30–35 full cans by weight before you count the empties coming back, so check the payload on the vehicle's registration papers and never plan by how many cans you can physically pile on.
| Vehicle | Estimated cost | Best for | Watch out for |
|---|---|---|---|
| Two-wheeler with a can rack (2 cans) | ₹15,000–40,000 for the rack and a second-hand bike | Lane-by-lane drops to shops and a few homes | Slow, unsafe on wet roads and a falling can can injure the rider |
| Three-wheeler cargo (petrol, CNG or electric), roughly 20–30 cans | ₹1.5–3.5 lakh used; more new | Dense neighbourhoods with narrow lanes and flats | Permit and registration category differ by state; confirm with your RTO |
| Mini-truck, around 750 kg payload, roughly 30–35 full cans | ₹3–6 lakh used; ₹5–8 lakh new | Offices and mixed routes with long gaps between clusters | Some societies and market lanes bar four-wheelers at set hours |
| Hand cart or tricycle inside a campus | ₹10,000–25,000 | Large societies where the vehicle parks at the gate | Only useful when the society permits it and the lift is usable |
Build a rack: wooden or mild-steel racks with a rail so cans cannot roll, stacked two or three high with a plank between layers. Pad the floor with a rubber mat. A can that drops from two feet may leak at the seam, and the loss lands on you, not the plant.
Count floors too. Many older flats have no lift, and carrying two cans up four floors is heavy work that no one wants to do twice. Plan a small per-floor charge or a minimum order for upper floors, and pay loaders per can delivered plus a small stair allowance so the hard drops do not get skipped.
Day one: godown, racks, dispensers and a way to check the water
You do not treat water, but you do need to store it so it stays fit to drink. A godown should be shaded, raised off the floor and kept away from drains, paint, fuel and kerosene. Sunlight on plastic cans for long periods warms the water and invites algae. Stack on pallets or plastic crates, not on wet ground.
| Item | Estimated cost | Buy now or later |
|---|---|---|
| Godown deposit and first month's rent (roughly 300–500 sq ft) | ₹30,000–1 lakh | Now |
| Plastic pallets or steel racks for 150–250 cans | ₹15,000–45,000 | Now |
| Handheld TDS meter and a pH pen | ₹500–3,000 | Now; check each plant delivery |
| Basic free-chlorine test kit or strips | ₹500–2,000 | Now, if the plant uses chlorine or ozone residuals; ask which |
| Manual pump or tilt stand for a customer's can | ₹100–400 | Now, as a giveaway or at cost for homes |
| Hot-and-cold dispenser for offices (bought, not given away) | ₹7,000–15,000 | Later, only when an office will pay a deposit or rent |
| Plain floor-standing cold dispenser | ₹4,000–9,000 | Later |
| Weighing scale, can-count register or tags | ₹1,500–5,000 | Now |
| Invoice book or billing app subscription | ₹0–3,000 a year | Now; see the software page |
Reading a TDS meter: a very low reading is not automatically better or worse, and the acceptable range is set by the standard the plant works to, which I haven't verified in this guide. What the meter is good for is consistency. If a plant's cans usually read a similar figure and one batch reads very different, set that batch aside and ask the plant for its report.
What to rent or borrow at the start
- Vehicle on hire: a goods vehicle with a driver by the day (commonly ₹1,200–2,500 a day depending on city and size) lets you test a route for a month before you commit to ₹3–6 lakh. Do it for the first month only.
- Cans on exchange with the plant: if the plant will lend its branded cans against a refundable deposit with you, your own can purchase can start at a hundred or so.
- Dispensers on customer deposit: let an office pay the dispenser cost back in a deposit or monthly rent, and keep the asset tag on the unit.
- Godown shared with another trader: a shaded corner with racks in a kirana or milk-depot godown can serve until you cross about 100 cans a day.
Whatever you rent, write the swap and damage terms down. An argument over who pays for a cracked can on day 40 is easier to win with a line in a message than with a memory.
What not to buy yet
- An RO or UV filtration line of your own. It is a different business: licence, quality tests, groundwater and pollution approvals and a trained operator. Our finding-suppliers page covers when that decision makes sense.
- A can-washing machine. The plant should wash and sanitise returned cans. If you wash them yourself you are taking on a food-safety job and the liability that comes with it.
- A second vehicle before the first is full. Add one when a route carries more than roughly 80% of its capacity on most days for a month.
- Branded uniforms, flashy graphics and a custom app on day one. Get 30–50 paying homes on a WhatsApp number and a register first.
- Extra dispensers in stock. Dispensers sold without a deposit leave. Buy one against each confirmed order.
- Large quantities of seals or stickers. Printing runs for 5,000 units look cheap per piece, but the plant or its label rules may change.
Packaged drinking water rules, including the standards a plant works to and the approvals it needs, have been revised in recent years. Check the current position with FSSAI and a local food safety consultant before you decide to bottle. This is not legal advice.
Paying for it
More on starting a water can delivery business
- Start hereThe full playbook →Models, licences, startup costs and the steps to your first customer.
- Go deeperGetting customers →First ten customers, can pricing and deposits, and keeping flats and offices from switching.
- Go deeperFinding suppliers →How to find, check and contract a packaged water plant, and when bottling yourself makes sense.
Questions people ask
How many water cans should I own to start?
Plan on roughly three times the cans you deliver in a day, because at any time most of your cans are with customers, at the plant or on the vehicle. If you expect 40 deliveries a day at the start, that is about 120–160 cans, rising as two-can households join. Replace this rule with your own weekly count once you have two weeks of data.
Which vehicle is best for 20-litre cans?
A cargo three-wheeler or a small goods vehicle usually works best, because a full can is about 21 kg and a bike carries only two. Pick by payload on the registration papers, the lanes you drive, and whether a society allows four-wheelers. Start on hire for a month if you can; confirm commercial registration and insurance with your RTO.
Do I need to buy a dispenser for each customer?
No. Homes can manage with a hand pump or a tilt stand costing a few hundred rupees. Hot-and-cold dispensers are worth buying only for offices that agree to pay a deposit or monthly rent, and you should tag each unit so it can be traced. Giving away expensive dispensers free is how many small distributors lose capital.
Can I use a household TDS meter to certify the water?
No. A TDS meter shows dissolved solids only and tells you nothing about bacteria or chemical contamination. Use it to spot batches that differ sharply from the plant's usual reading, then ask the plant for its lab report. Certification comes from the plant's licence and testing, not from your meter.
Should I buy new or used cans?
Buy new for most of your float and used cans only after inspecting a sample for scratches, cloudiness and smell. New cans cost more up front, but they look clean to a customer and are less likely to be rejected. Whichever you pick, agree with the plant in writing how many refills a can is meant to last.
