What to buy · EV charging station · 5 min read

What to buy to start an EV charging station in India

What a public EV charging station buys first: AC and DC chargers, connectors, panel and cabling, metering, canopy, CCTV and safety kit, with ballpark ₹ costs.

Planning this? Ask an expert, free ↓
Voltride electric scooter subscription and smart battery swap
Runs on Voltride · EV scooter

Part of the playbook: How to start an EV charging station in India: costs and rules

On day one a public charging station buys a mix of chargers sized to the vehicles around the site, an LT panel with a dedicated meter, earthing and cabling, bay markings and lighting, CCTV, and a fire and safety kit. Chargers are only about half the bill; the electrical work behind them is the other half and is where first-timers underestimate.

The choice that drives everything is power per gun. A 7 kW AC point suits a mall car park where cars sit for hours, a 30 kW DC gun suits a city taxi stop, and 60 kW and above only makes sense on a highway or a hub where cars genuinely need a 30-minute top-up. This page covers what to buy, rent or lease, and defer.

Pick the charger type from the dwell time, not the brochure

Count how long a vehicle stays at your site. Dwell time decides whether a slow charger earns the same energy as a fast one, at a fraction of the cost.

Rough 2026 ranges for the charger alone, before GST, installation and warranty add-ons. Quotes vary widely by make, enclosure and whether the dispenser is liquid-cooled.
ChargerTypical useEstimated cost per unitWatch out for
Bharat AC001 / light-EV AC point (3 kW range)Two- and three-wheelers at markets, offices, depots₹15,000–45,000Many bikes now ship with their own connector; check what local riders actually use
Type 2 AC (7.4 kW and 11 kW)Cars at hotels, malls, offices, hospitals₹40,000–1,20,000Needs the car's onboard charger to accept the power; 7.4 kW is common in Indian cars
Light-EV DC (up to about 12 kW)Quick top-ups for delivery two-wheelers and e-rickshaws₹1.5–4 lakhCheck that it speaks the connector and protocol your fleet uses
CCS2 DC, 30 kWCity cars and taxis that need 30–60 minutes₹4–8 lakhReal delivered power is usually well below the plate rating
CCS2 DC, 60 kW and aboveHighway and hub stops₹9–25 lakh and upNeeds a bigger connection and often a transformer; cooling and fan service matter

Indian charging standards are set under BIS (the IS 17017 series). Cars use CCS2 for DC and Type 2 for AC, while smaller electric vehicles use the Bharat AC001 and DC001 interfaces. The Ministry of Power guidelines also prefer that operators serving light EVs offer at least a 7.4 kW AC or DC option. Buy only certified units and ask for the test certificate in writing.

The electrical backbone: panel, cable and earthing

A charger is a heavy, continuous load. A decent site sizes the supply for the chargers running together, not one at a time.

  • LT panel with an incomer, one MCCB or MCB per charger, surge protection and an RCD or RCCB suited to the charger's DC leakage requirements. Ask the charger maker which RCD type it expects.
  • Armoured copper or aluminium cable from panel to each pedestal, in conduit or a trench, sized for voltage drop over the actual run. Long runs of thin cable cause nuisance trips and heat.
  • Earthing pits with a measured earth resistance. A bad earth is the classic cause of chargers that fault in the monsoon.
  • A separate sub-meter or revenue meter for the charging load, with the DISCOM's category and tariff confirmed in writing.
  • UPS or at least a small backup for the network modem and controller, so a short power cut does not drop the charger offline from the cloud.

A connection up to 150 kW can generally be taken on a low-tension supply under the national guidelines, so a transformer is a hub-scale cost, not a starter cost. Do not order a transformer before the DISCOM confirms that the local feeder cannot give you the load.

Day-one budget: what a 30 kW plus AC site really needs

Ballpark estimates in ₹ for a leased site in a tier-2 city, before GST. Metro civil work and DISCOM charges run higher.
ItemMust-have day oneCan wait
ChargersOne 30 kW CCS2 DC gun and two to three AC points (₹6–11 lakh)A second DC unit; add only when the first averages several sessions a day
Panel, cabling, earthing, meter₹2–4 lakh with LT supplyTransformer and HT metering (₹15–35 lakh) unless the DISCOM insists
Bay marking, wheel stops, bollards, signage₹40,000–1 lakhBranded canopy and LED totem (₹2–6 lakh)
CCTV with a night camera and a cloud copy₹40,000–90,000ANPR cameras for fleet gates
Fire and safety kit, first aid, emergency-stop labels₹25,000–60,000Thermal cameras and fixed suppression
Lighting and a basic waiting shelter₹50,000–1.5 lakhCafé kiosk, vending, a proper lounge

If your plan is to rent the land and buy everything else, put the large items under a lease schedule, so the site owner cannot claim the panel and meter at exit. Leasing the chargers themselves under an equipment finance product is common, but read the buy-back and uptime terms carefully.

Rent, buy or share: a few trade-offs

  • Buy the chargers if you plan to run the site for years and want to switch the back-end software yourself. Make sure the units support OCPP, so you are not locked to one vendor's cloud.
  • Take chargers on revenue share from a CPO or OEM if you own good land but not the cash. You get less margin but also less risk; read how the energy cost, downtime and exit are handled.
  • Lease the land rather than buy it. Government and public land can be offered on a per-unit revenue share under the Ministry of Power guidelines, with a model agreement published; private landlords will negotiate fixed rent, a share or a hybrid.
  • Avoid buying solar and a battery on day one. They can cut peak demand and are worth modelling later, but they raise the budget and the approval list before you know your sessions per day.

Subsidies and capital incentives for chargers have changed several times and differ by state. We have not verified any current amount; ask your state EV nodal agency before you buy, and do not count a subsidy in the budget until it is sanctioned.

What not to buy yet

  • A big bank of AC points at a site where cars leave within the hour. AC suits long dwell; the same cars would block it for a short top-up.
  • The most powerful charger on the datasheet. Most cars on Indian roads cannot draw 150 kW, so a 60 kW unit is plenty on a city site.
  • A proprietary-cloud charger that cannot be moved to another network operator. Check for OCPP 1.6J or 2.0.1 on the spec, and ask about roaming support.
  • A fancy canopy before sessions arrive. Spend on lighting and signage visible from the road first.
  • Battery swapping hardware unless you have a fleet partner signed for a specific battery format. See the ev scooter dealership page for how two-wheeler buyers actually charge.

Next, read finding suppliers for a charging station for how to shortlist makers and electrical contractors, and the software to run it before you commit to a charger brand. The full launch outline is in how to start an EV charging station.

Paying for it

More on starting a EV charging station

Questions people ask

Which charger should I buy first for a public station?

Buy the charger that matches how long vehicles stay. For malls, hotels and offices where cars park for hours, 7.4 kW or 11 kW AC points are cheaper and earn similar energy. For taxi stops and city hubs, add one 30 kW CCS2 DC gun. Skip very high power until a feeder and traffic justify it.

Do I need a transformer for my charging station?

Usually not for a small start. Under the Ministry of Power guidelines a low-tension connection up to 150 kW is available for separately applied EV charging connections, which covers most city sites. Hubs with several high-power DC chargers often need more, so ask the DISCOM about feeder capacity before you budget for a transformer.

Should my chargers support OCPP?

Yes. The national guidelines advise open communication protocols such as OCPP so that chargers can be monitored, billed and moved between network software providers. Most Indian networks use OCPP 1.6J today, with 2.0.1 gradually arriving. A closed, vendor-only cloud ties you to one supplier for years.

How much does one DC fast charger cost?

A 30 kW CCS2 unit is roughly ₹4–8 lakh for the charger alone, and 60 kW and above climbs from about ₹9 lakh upward. These are estimates for the equipment before GST. Installation, cabling, panel and connection often add 30 to 60 percent, so ask for a turnkey quote.

Can I get a subsidy on chargers?

Some central and state schemes support public charging, but amounts and eligibility have changed over time and we have not verified current figures. Check with your state EV nodal agency and the DISCOM before ordering. Treat any subsidy as upside, not as part of the budget that decides whether the station is viable.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert