For a counter that does screens, batteries, charging ports and software fixes, buy a hot-air rework station, a temperature-controlled soldering iron, a regulated DC power supply, a stereo microscope, a multimeter, opening and prying tools, and an anti-static bench. That core is roughly ₹40,000–1.2 lakh, and it covers most of what walks in. Buy the screen-refurbishing and board-level machines only after the simple jobs are paying for them.
The common mistake is buying a lamination machine, a programmer box and a thousand-piece tool kit in week one, then finding that 80 percent of jobs are a battery, a display or a dock flex. Match tools to the repairs you will actually be paid for, and test every tool on a scrap board before it touches a customer's phone.
Level 1 bench: screens, batteries, ports and software
This is the bench for a first shop. It handles display and battery swaps, charging dock and speaker replacement, back-glass removal on common models and flashing or resetting phones.
| Tool | Estimated cost | What it is for and what to check |
|---|---|---|
| Temperature-controlled soldering station (T12 or similar cartridge type) | ₹2,500–9,000 | Dock, battery tab and flex pad work; buy one with swappable tips and a stand, not a fixed-wattage pencil iron |
| Hot-air rework station with airflow control | ₹3,500–12,000 | Lifting shields, ICs and frames; a unit with a digital temperature display and a few nozzle sizes |
| Regulated DC power supply, 0–30 V, 0–5 A, with current display | ₹3,500–12,000 | Powering a dead phone with the battery out and reading the current draw, which tells you whether a short exists |
| Digital multimeter with continuity and diode mode | ₹1,500–5,000 | Tracing shorts on charging lines; a probe set with fine tips matters more than the brand |
| Stereo microscope, 7x–45x, with a boom stand | ₹10,000–30,000 | Board work on 0402 and 0201 components is impossible by eye; add a camera adapter later to show customers the damage |
| Precision screwdrivers, spudgers, suction cups, tweezers (ESD safe), opening picks | ₹2,000–6,000 | Pentalobe, tri-point, Phillips and Torx bits for the phones you actually see; replace cheap bits that round off screws |
| Anti-static mat, wrist strap, ESD-safe tray with screw compartments | ₹1,200–3,500 | Stops static damage and stops parts from mixing across jobs |
| Fume extractor with carbon filter | ₹2,500–7,000 | Flux fumes are an everyday health issue; do not rely on the shop door |
| Isopropyl alcohol, flux, solder wire, solder paste, Kapton tape, B7000-type adhesive, UV glue | ₹3,000–8,000 per month | Consumables; track them so they do not vanish into jobs you did not charge for |
A software setup for flashing, FRP and account checks rides on top of this: a Windows laptop with the vendor drivers for Qualcomm, MediaTek and Samsung chipsets installed, and a few quality USB cables. Treat any tool that bypasses an account lock as usable only with proof of ownership; see the note below.
Bypassing activation or account locks on a phone you cannot show belongs to the customer can expose the shop to a stolen-device allegation. Ask for the purchase bill or ID, record it on the job card, and refuse where it does not add up. This is general guidance, not legal advice.
Level 2 bench: board-level repair
Board-level work is where the margin is and where new owners lose money. It means fixing a phone that will not power on, charge or detect a SIM by replacing components on the logic board rather than swapping a module.
| Tool | Estimated cost | Why it earns its place |
|---|---|---|
| Preheating plate or bottom heater | ₹2,500–7,000 | Warms the board evenly so multilayer boards do not warp when you lift a chip |
| Trinocular microscope with HD camera | ₹18,000–45,000 | Lets a second technician or customer see the fault, and gives you before and after photos for the job card |
| BGA reballing stencils, solder balls, a stencil frame | ₹3,000–10,000 | For charging, audio and power ICs on popular models; stock stencils only for models you actually repair |
| Ultrasonic cleaner, 3 to 6 litre, with a heater | ₹5,000–14,000 | Water and liquid damage: cleaning corroded boards before any component work |
| Board holder, jumper wires, flying probes, schematic and boardview software subscription | ₹4,000–15,000 plus a yearly subscription | Without schematics you are guessing; confirm the licence price and terms with the seller before paying |
| Programmer for iPhone display and battery data, such as JC or Qianli models | ₹12,000–30,000 | Moves serial or display data so Face ID, True Tone and battery health messages behave after a swap |
| Battery spot-welder and battery tester | ₹6,000–15,000 | Tab replacement on battery packs, and a proper capacity test before selling a battery as healthy |
Plan another ₹60,000–1.6 lakh over the Level 1 bench for the full board-level kit. Do not buy it until a skilled technician is on payroll or you have trained yourself; an unused hot-air station teaches nobody anything.
Screen refurbishing: glass-only and lamination machines
Some shops separate a cracked glass from a working OLED or LCD, bond new glass on and sell the repair at a fraction of a new display. The equipment is expensive, the learning curve is steep, and the waste of cracked panels is real.
- LCD separator or freezer separator, vacuum laminator, bubble remover (autoclave), UV lamp and OCA or LOCA glue. As a set, expect roughly ₹45,000–1.8 lakh depending on size and automation (estimate).
- Do the sums first. Count how many glass-only jobs you would do a month. If it is under 15 to 20, buying refurbished glass-ready displays from a lab is cheaper than the machines, the glue and the rejects.
- Curved-edge OLEDs break more often during separation than flat LCDs, so the first month is usually a scrap pile. Price the wasted panels into your plan.
- Warranty differs. A re-laminated screen can show a faint halo or lose touch response with age; give a shorter warranty and say what it covers.
- It is a good wholesale business only after you have the volume and a technician dedicated to it, such as serving smaller shops that do not want the capital cost.
The counter, security and safety
Customers judge you before the phone leaves their hand. The counter has to look organised, and your own risk, from fire to theft to blame for existing damage, has to be controlled.
| Item | Estimated cost | Why it matters |
|---|---|---|
| Glass counter with lockable display and a locked drawer for received phones | ₹25,000–70,000 | Customers' phones should never sit loose on the bench; a locked drawer is also your answer to a missing-phone claim |
| CCTV with 4 cameras and a DVR or cloud plan, covering counter and bench | ₹12,000–30,000 | Settles disputes and deters theft of parts and phones; tell customers they are on camera |
| Lithium battery fire bin: a metal container with sand, and an ABC extinguisher nearby | ₹1,500–5,000 | Punctured or swollen cells can ignite; swollen batteries need isolating, not stacking in a drawer |
| Tagged storage: numbered trays, bags and tags that match the job card number | ₹2,000–5,000 | Phone, charger, SIM tray and back cover must stay together and tied to one job |
| Thermal label printer for job tags, with barcode or QR labels | ₹6,000–12,000 | Faster intake and fewer mix-ups once you pass 15 phones a day |
| UPS or inverter for the bench and lights | ₹6,000–15,000 | Power cuts mid-lamination or mid-flash can brick a phone |
Keep one clean surface for customers' phones and a separate surface for the parts you will fit. Mixing a customer's old part with new stock is how shops give back the wrong phone.
What to skip in the first six months
- A big universal tool kit with 200 bits. Buy bits for the phones that walk in. Replace as you go.
- Programmer boxes for chips you do not repair. Most vendor tools are priced for labs; one good iPhone programmer and one good Android flasher suffice.
- A second microscope or a second hot-air station. Add them only when two technicians are waiting for the first.
- Large parts stock for flagship models. Models change and prices of parts fall quickly; keep a lean stock of fast movers and order the rest from a supplier within a day. See where to find parts suppliers.
- Expensive test equipment such as thermal cameras (₹20,000 and up, an estimate). Use isopropyl, a power supply with current display and your fingertip first; buy a thermal camera when you are tracing shorts on a daily basis.
Be strict with accessories too. Chargers, cables and power banks are the part of the counter that sits on the shelf. Keep a small range of BIS-marked items, and read the playbook's licence section before you stock any.
Where to buy tools in India
Match the place to the item. Cheap precision tools differ enormously in quality, and a poor tip or a drifting temperature reading ruins a board.
- Wholesale electronics markets for tool kits, hot-air stations, soldering stations and consumables, with the advantage that you can see and hold the item: Nehru Place in Delhi, Lamington Road in Mumbai, SP Road in Bengaluru and Ritchie Street in Chennai are well-known clusters for these.
- Authorised distributors and brand websites for the better microscopes, power supplies and ESD gear, which come with a warranty and a GST invoice.
- B2B marketplaces such as IndiaMART for sourcing laminators and ultrasonic cleaners from manufacturers and traders, with a video call or visit before payment.
- Used-equipment sellers for microscopes and power supplies, where the saving can be real. Insist on a bench test and a short return window.
- Training academies and repair labs sometimes resell kits and refurbished machines to graduates; ask for a written warranty.
Ask for a GST invoice on everything, since input tax credit is available only against proper invoices once you are registered. Our GST billing software guide explains the invoice side. For the rest of the shop set-up, see the playbook for starting a mobile repair shop and, if you plan to resell phones, the second-hand goods playbook.
A buying order that protects your cash
| Phase | Buy | Cash needed (estimate) |
|---|---|---|
| Before opening | Level 1 bench, counter, lockable storage, CCTV, fire safety | ₹1.2–2.8 lakh |
| Months 2 to 4 | Preheater, camera for the microscope, ultrasonic cleaner, thermal label printer | ₹30,000–80,000 |
| Months 4 to 8 | Board-level tools and one programmer, once a technician can use them | ₹50,000–1.5 lakh |
| After 8 months, if volume is there | Screen refurbishing set | ₹45,000–1.8 lakh |
Put aside a small repair fund for the tools themselves. A tip, a nozzle, a heater element and a power supply fuse go in the first year; a budget of ₹10,000–20,000 a year is a reasonable guess.
In the mobile repair shop library
More on starting a mobile repair shop
- Start hereThe full playbook →Models, licences, startup costs and the steps to your first customer.
- Go deeperWho to hire →Technician roles, estimated pay, skill tests and controls against pilferage and poaching.
- Go deeperFinding suppliers →Parts grades, wholesale hubs, how to test suppliers and how to track dead-on-arrival rates.
Questions people ask
How much do tools for a mobile repair shop cost in India?
A Level 1 bench with a soldering station, hot-air station, power supply, microscope, multimeter and hand tools costs roughly ₹40,000–1.2 lakh. Adding a board-level kit and a programmer takes it to ₹1.5–2.8 lakh, and a screen-lamination set adds ₹45,000–1.8 lakh. These are estimates and vary by brand and city.
Which tools do I need for chip-level mobile repair?
You need a hot-air rework station, a preheater, a temperature-controlled soldering iron, a regulated DC power supply with current display, a microscope, a multimeter, BGA stencils and schematic software. A programmer for iPhone display and battery data is useful too. The skill of the technician matters more than any one machine.
Should I buy a screen lamination machine at the start?
No. Buy it only when you already do 15 to 20 glass-only screen jobs a month. Until then, refurbished glass-ready displays from a lab cost less than the machine, glue and scrap panels. Lamination also needs a trained technician, and the first month usually produces a pile of cracked panels.
Is it better to buy second-hand repair equipment?
Sometimes. Microscopes and bench power supplies hold up well second-hand, so test them on the seller's bench and ask for a short return window. Be careful with hot-air stations, heaters and lamination machines, where worn parts and unknown history cost more than the saving.
Do I need an inverter or UPS for a phone repair bench?
Yes, a small one is worth the money. A power cut during flashing can brick a phone, and a cut during lamination or a reflow can ruin a panel or a board. A UPS that holds the bench, lights and laptop for 20 to 30 minutes is usually enough, and it costs ₹6,000–15,000 (estimate).
