Who to hire · mobile repair shop · 7 min read

Who to hire for a mobile repair shop in India

Roles, estimated pay and how to test a phone repair technician in India: L1 and board-level skill checks, parts-issue controls and how to stop staff leaving.

Planning this? Ask an expert, free ↓
Homecraft on-demand home repairs and maintenance
Runs on HomeCraft · Home services

Part of the playbook: How to start a mobile repair shop in India: costs and licences

Hire a hands-on technician before you hire anyone else, and test the skill on a bench rather than from a certificate. A first shop usually runs on the owner, one Level 1 technician and a counter person. Board-level engineers and a runner for parts come as volume grows. Salaries are estimates and depend heavily on city and on how many phones a person actually turns around.

Your real risks are not hiring mistakes about attitude. They are technicians who leave and open a shop two lanes away, parts that disappear, phones that get opened for curiosity and warranty claims on a job done by a person who has since quit. Set up the roles, tests and controls below before the first hire.

The roles in a repair shop

Estimated ranges for a tier-2 city. Metro pay can run 20 to 40 percent higher, and strong board-level engineers are paid above the range.
RoleWhat they doEstimated monthly pay
Owner-technicianIntake, quotes, complex faults, customer calls, supplier ordersDraw what the shop can afford; first-year income is often thin
Counter executiveIntake, job cards, photos, price lists, billing, delivery, WhatsApp updates₹10,000–18,000
Level 1 technicianDisplay and battery swaps, charging dock, speaker and mic, back-glass, software and flashing₹12,000–22,000
Level 2 or board-level technicianNo-power, no-charge, no-network, liquid damage, IC reflow, reballing, data recovery₹25,000–50,000
Parts runner or buyerDaily trip to the wholesale market, sorting and testing parts, supplier follow-up₹10,000–16,000
Pickup and delivery personCollects phones from offices and homes for repair, with signed receipts₹10,000–15,000 plus fuel

A single-counter shop usually needs the owner, a counter person who can also do simple jobs and one Level 1 technician. Add a Level 2 technician when you can see at least 15 to 20 board-level jobs a month going to other shops or sitting uncompleted in a drawer.

Where to find technicians

  • Other repair shops. A technician in a busy lane often knows who is looking. Poaching a neighbour's staff invites the same treatment; if you do it, be open about it.
  • Repair training institutes and academies run by local trainers in most mobile markets, where final-month students are usually available as trainees. Ask the trainer which students can open a phone without a demonstration.
  • ITI and polytechnic electronics departments. Graduates have the theory and need bench time. Many are a good fit for a counter-plus-technician role.
  • Skill-council programmes under the Telecom Sector Skill Council include handset repair job roles. I have not verified the current qualification pack names or fees; ask the training provider what certificate they issue and whether the job role is recognised.
  • Referrals from your own suppliers. A parts distributor sees which technicians pay on time and which do not.
  • Local job groups on Facebook and WhatsApp, and Apna or similar job apps, for counter and delivery roles.

Certificates help a customer's confidence and little else. Hire on a bench test, and treat a certificate as one point of evidence.

How to test a technician on the bench

A 90-minute practical test with real phones shows more than three interviews. Keep two or three donor phones for it, and run the same test for every candidate.

Run the test on donor phones. Watch the work rather than the speed.
LevelTestWhat you are watching
Level 1Replace a battery and a display on a sealed-back phone, then refit every screw in the right holeHeat control on adhesive, how they handle flex cables, and whether they photograph and bag the screws
Level 1Diagnose a phone that charges slowly: a dirty port, a bad cable or a swollen batteryWhether they test with a known-good cable and a power supply before replacing parts
Level 2Power a no-power phone from a DC supply and read the current: no draw, short or boot-loop patternWhether they know what each current range suggests and can name the next check
Level 2Lift and re-fit a charging IC or reflow a shield on a scrap boardPreheat, temperature, flux, nozzle choice and the quality of the finished joints under the microscope
Level 2Explain how they would approach a liquid-damaged phoneDisconnect the battery first, clean in an ultrasonic bath, do not power it on to see if it works
CounterRole-play an angry customer with a pre-existing crackTone, clarity and whether they stick to the intake record
  • Ask for the names of two earlier employers and call them, with the candidate's knowledge.
  • Ask how many comebacks they had last month, and what they did about them. Those who cannot say probably did not count.
  • Ask what they would refuse to repair. A good technician has an answer, such as a phone whose owner cannot prove it is theirs.

Pay structure that rewards quality

A flat salary rewards the technician who does the fewest jobs. A pure commission rewards the one who rushes. A base plus a per-job incentive, with comebacks deducted, works better for most shops.

Structure only; amounts depend on your volume and margin and are not suggested figures.
Part of payHow it can workWatch out for
Base salaryCovers the minimum standard of living and is paid on time every monthA base that is too low pushes people towards side jobs on shop time
Per-job incentiveA small fixed amount per completed job, higher for board-level workCounting jobs the shop did not charge for
Comeback deductionA repeat repair for the same fault within the warranty window is unpaid or partly deductedBlaming the technician for a bad part; check the supplier log before deducting
Quality bonusA small monthly bonus for a low comeback rate and clean intake recordsA bonus so tied to comebacks that technicians stop admitting mistakes

Write the terms down and sign them, including the warranty-window rule. Salary dates, holidays and overtime during festival rush (Diwali, new model launches) should be agreed before the first busy week.

Controls: parts, phones and data

Assume any shop will have a missing part or an angry customer. These controls cost almost nothing and settle most disputes.

  • A parts issue log: every part leaving the stock cabinet is written against a job card number, by a person other than the one fitting it. Weekly stock counts reveal gaps within a week.
  • One job, one tray. The phone, old parts and screws stay together in a numbered tray until delivery. Old parts go back to the customer on request, which stops disputes about replacement.
  • CCTV over the bench, disclosed to staff and customers, and a rule that no personal phones are used at the bench.
  • No browsing the phone. A written policy, signed by every technician, that gallery, chats and payment apps are never opened, and that any test that needs access happens with the customer present.
  • Passcode and FRP policy on the job card: who sets or removes locks, when and what is recorded.
  • A non-solicit and confidentiality agreement covering customer lists and supplier terms. Enforceability of such clauses is limited; keep them reasonable and ask a lawyer to review them.

The customer-data duties behind these controls are explained in our DPDP Act checklist, and the licences and waste points in the playbook.

Training and retention

Skill is your main asset and it walks out at six in the evening. A few habits cut the churn.

  • Pay for one course a year such as a board-level or iPhone-specific batch, with a clear agreement that the person stays for a set period.
  • Share a bench of new tools and let a good technician choose their own tips and tweezers. People look after tools they chose.
  • Pair a Level 1 with a Level 2 on tough jobs, so the Level 1 learns on live work and the Level 2 stops being a single point of failure.
  • Give titles and a path. Level 1 to Level 2 to lead technician, with a pay step at each stage.
  • Document the repairs. A shared sheet with faults, fixes and parts used by model means a departure does not take every repair with it.

Labour rules depend on your state and on headcount, including minimum wages, provident fund and ESI, weekly offs and Shop & Establishment conditions. I have not verified current thresholds. Confirm with your state labour department or a CA. This is not legal advice.

When to add the next person

Hire against a backlog you can count, not against a feeling.
SignalLikely hire
Phones wait more than two days for a free technicianA second Level 1 technician
You turn away no-power and liquid jobs weeklyA Level 2 technician, or an arrangement to send board work to a lab
You are at the wholesale market for two hours most daysA parts runner
Office and college pickups keep slippingA pickup person, or a tie-up with a local courier
The owner is stuck at the counter all dayA counter executive, so you can return to the bench or to suppliers

For the equipment these people will use, see what to buy. For the systems that keep their work traceable, see software to run a repair shop.

In the mobile repair shop library

More on starting a mobile repair shop

Questions people ask

How much do mobile repair technicians earn in India?

Estimates vary by city and skill. A Level 1 technician who does screens and batteries earns roughly ₹12,000–22,000 a month in a tier-2 city, while a board-level engineer earns ₹25,000–50,000 or more. Metros pay more, and strong board-level engineers are paid above the usual range. These are ballpark figures, not market data.

How do I test a mobile repair technician before hiring?

Give a 90-minute bench test on donor phones: a battery and display swap on a sealed phone, a power-supply diagnosis of a dead phone and, for board-level staff, a chip reflow on a scrap board. Watch how they handle heat, flex cables, screws and measurements. Then call two previous employers.

Do I need a certificate to hire a repair technician?

No. A certificate is helpful context, but it does not show that someone can work under a microscope. Hire on a practical test and references. If you want certified staff, ask the training provider what the certificate covers and check whether it is tied to a recognised skill council or just to the academy.

How do I stop a technician from taking my customers?

You cannot fully stop it, but you can make it harder. Keep customer records in the shop's system rather than a technician's phone, use the shop's WhatsApp number for updates, pay fairly, and sign a reasonable non-solicit agreement. Restrictive clauses have limited enforceability, so a lawyer should review yours.

Should I hire a freshly trained student or an experienced technician?

Hire an experienced Level 1 technician first, because he or she can work unsupervised from day one. Add a trainee later as a paid apprentice for simple jobs such as software and battery swaps, with a bench mentor. Do not leave a trainee alone with customers' phones in the first months.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert