Software to run it · modular kitchen business · 6 min read

Software for a modular kitchen and wardrobe business

Software for a modular kitchen maker in India: layout and 3D tools, cut-list optimisers, running-foot quotes, job tracking, GST billing and when custom pays.

Planning this? Ask an expert, free ↓
Nookly room-scale furniture shopping and turnkey interior design
Runs on Nookly · Furniture & interiors

Part of the playbook: How to start a modular kitchen business in India

Start with a layout and 3D tool, a cut-list optimiser, a quotation spreadsheet and WhatsApp plus a simple CRM sheet. Move to cabinet-specific design software when drawing errors cost more than a licence, and to a custom system only when quotes, production and warranty need to share one record.

Software prices and plans change often and I have not verified current ones, so check each vendor before budgeting. Tool names below are examples to evaluate, not recommendations. The business context is in the modular kitchen playbook.

What the trade actually needs software for

A kitchen maker's information flows in one line: enquiry, site measurement, layout, quote, booking, final measurement, cut list, production, delivery, installation, snag list, warranty. Most errors come from copying data between steps by hand, so judge any tool by how many of those copies it removes.

Categories first, products second. Your volume decides how many you need.
JobCategory of toolTypical failure without it
Layout and 3DKitchen and cabinet design software, or general 3D with a cabinet plug-inClients cannot picture the kitchen, so revisions multiply
Cut list and board optimisationPanel-nesting optimiser that outputs a cutting diagram and labelsBoard wastage above plan, wrong dimensions, missing grain direction
Edge-band and hole dataCabinet software output or a spreadsheet templateWrong edges banded, 32 mm holes drilled on the wrong face
Quotation by running footA rate-card spreadsheet or quotation moduleInconsistent quotes and forgotten items
Lead and job trackingCRM or a job boardLeads forgotten, site visits double-booked
Production and deliveryOrder tracker with status and labelsPanels missing at site, repeat trips
Billing and GSTAccounting software with e-invoicing where applicableUnmatched invoices and delayed collections

Layout, 3D and drawings

General 3D tools such as SketchUp, with cabinet plug-ins, are enough for the first jobs. They are flexible and cheap but depend on the designer's discipline, so every cabinet is only as correct as its drawer. Dedicated cabinet design software such as Polyboard, Cabinet Vision, imos, KD Max or Pytha generates parts, edge flags, drilling data and hardware lists from the design itself; the cost and the learning curve are higher.

  • Free or low-cost: general 3D with a cabinet extension, a CAD for plan drawings and a spreadsheet for BOQ.
  • Paid cabinet software: worth it when you have a detailer and your factory accepts its output files for the saw and edge bander.
  • Rendering: a quick render service per view, or a real-time render plug-in, before buying a render workstation.
  • Manufacturer tools: some hardware makers offer free drawer and hinge configurators; check which fittings they cover.

Before buying anything, ask your processing factory which file formats and cut-list layouts it accepts. A tool whose output the factory cannot read is a tool you will re-type.

Cut lists and board optimisation

A kitchen needs about eight to fourteen full sheets of 8 by 4 ft board for carcasses, plus shutters, backs and shelves, so a 5% saving on wastage is real money across a month. A cut-list optimiser such as OptiCut, CutList Optimizer or the nesting module of cabinet software arranges parts on sheets, respects grain direction, and prints labels.

A checklist your detailer ticks before sending the file to the factory.
Check on every cut listReason
Panel thickness and board type per part18 mm carcass, 8 mm or 6 mm back, 25 mm countertop support, mixed boards
Grain direction on shutters and visible panelsMismatched laminate grain is obvious on a straight run
Edge-band flags on each sideVisible edges banded, hidden edges as per spec
Hole positions on the 32 mm systemShelf pins and cams on the correct face
Part labels by room, wall and unit numberInstall crews rely on labels, not memory

Keep a standard parts library for repeating units such as a 600 mm base with two drawers or a 900 mm tall unit. Reusing tested units cuts drawing errors and makes quotes consistent.

Quotation, CRM and job tracking

A spreadsheet with a rate card handles quotes at the start: a table of base, wall and tall units by running foot, a hardware catalogue with prices, stone and installation lines, and a PDF export that matches your brand. Add a lead sheet with source, stage, next follow-up date, site-visit date, quote value and lost reason.

Volumes are rules of thumb; your own error rate is the real test.
VolumePractical setupMove on when
Up to 10 open jobsSheet quotation, lead sheet, WhatsApp groups per jobReplies are slipping or quotes disagree
10–30 open jobsA CRM with stages and reminders, a job board for production and installation, shared cut-list foldersProduction status is asked on calls every day
30+ open jobs, or multiple branchesIntegrated quote, production, inventory and warranty systemSpreadsheets cannot show where each job is stuck

A business inbox and CRM that brings WhatsApp, calls and forms into one place is the lightest upgrade. WhatsApp itself can be tied into a CRM; see WhatsApp for business apps for what is possible and the limits.

Billing, GST and payments

Stage payments, advances and the final balance need to match tax invoices. How a supply-and-install contract is taxed depends on how it is structured, so let your CA decide the invoicing method before you buy software. Our GST billing software guide lists what to look for in accounting tools, and a billing app can be built when stage billing is unusual.

  • Issue a proforma at booking and a tax invoice at the point your CA advises.
  • Track receipts against each job so you know which kitchens are paid ahead of production.
  • Reconcile supplier invoices before paying, particularly for board and hardware.
  • Keep copies of signed drawings and measurement sheets attached to each job file.

When a custom system pays and what it would cover

Custom software is not worth it for a studio with a handful of jobs. It starts to pay when a single record per job is missing: when the quote, the cut list, the factory order, the delivery and the warranty claim live in five places and the team spends hours stitching them together.

A custom system should replace specific hand-offs, not copy a large ERP.
ModuleWhat it would coverWhy off-the-shelf struggles
Rate-card quotingRunning-foot rates, finish and hardware packages, stone as a separate line, version history and client approvalGeneric quoting does not know a unit is a 600 mm base with a corner carousel
Job recordMeasurement sheets, drawings, approvals, change requests and photos by wallWhatsApp threads lose context
Factory orders and trackingCut list to factory, status by stage, labels, delivery slot and crew assignmentSpreadsheets are not shared in real time
Warranty ticketsInstall date, hardware set, claim history, spare parts usedWarranty is remembered, not recorded
Client viewA page to see layout, payments and handover dateReduces progress calls

As a ballpark, a small custom job-and-quote tool is a project in the lakhs, not thousands; see what an app costs in India and start with a narrow first version.

Our concept build and The Saral

Our concept build Nookly is a room-scale furniture and interiors storefront with AR previews and swatch selection. It does not do cut lists, quote by running foot, drive panel saws or handle installation scheduling. What carries across to a kitchen business is the room preview, finish swatches and the milestone tracker that keeps clients informed.

The Saral builds websites and apps for small businesses at a fixed quote. If you want a gallery site with an enquiry form, a client quote portal or a job tracker built for your own rate card, send a brief. If a spreadsheet and a CRM still work for you, keep them.

More on starting a modular kitchen business

Questions people ask

What software do modular kitchen businesses use?

Most use a 3D layout tool, often SketchUp or dedicated cabinet software, a cut-list optimiser, a quotation spreadsheet, WhatsApp and a CRM or lead sheet, plus GST accounting software. Start cheap, and upgrade to cabinet software when drawing errors and remakes cost more than a licence. Check each vendor's current pricing.

Do I need cabinet design software like Polyboard or Cabinet Vision?

Not at the start. General 3D with a spreadsheet works for the first jobs. Dedicated cabinet software helps once you have a detailer and your factory accepts its output files, because it produces parts, edge-band flags and hole data directly from the design. Ask your factory which formats it accepts before buying.

How do I calculate a modular kitchen quotation?

Build a rate card by running foot for base, wall and tall units, with separate lines for shutter finish, hardware set, accessories, stone and installation. Add your wastage, transport and warranty reserve. Test the card against your last five jobs, then keep stone separate because suppliers and prices differ.

When should a kitchen business build custom software?

When one job's quote, cut list, factory order, delivery and warranty history live in several places and staff spend hours reconciling them. Build a narrow tool first, such as a rate-card quote and job tracker, rather than a full ERP. For a few open jobs, a spreadsheet and CRM are cheaper and enough.

Can WhatsApp run my customer follow-up?

For a few jobs, yes, with a group per job and saved replies. As volume grows, messages get lost, so tie WhatsApp to a CRM that records stage, follow-up date and quote value. Check Meta's current rules and pricing for business messaging, because they change and I have not verified them.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert