Product brands · 5 min read

What should a manufacturing agreement with my maker say?

The short answer

A manufacturing agreement should fix what is made (specification), how it is tested (quality and rejection), what you pay and when (price, minimum order, advance), who owns what (formula, design, artwork, tooling), whether the maker may sell the same product to others, who recalls a bad batch, and how either side leaves. If the maker only gives a quotation and a purchase order, you have a price but no protection. Get a lawyer to read the draft before you pay the first advance.

Not sure about your case? Ask an expert, free ↓

When the sample is good and the paperwork is a WhatsApp chat

The sample feels right. The maker says the minimum order is fixed, the advance is half, and "we will work out the rest as we go". Six months later the second batch is a different texture, the maker is selling a near-copy to someone else, and the only record of what you agreed is a chat. A written agreement turns a friendly arrangement into something you can enforce, and it forces both sides to decide the awkward questions on day one.

This page covers the clauses that hold whatever your product is. Who owns the recipe or pattern has its own page, who owns the formula, because it is the clause brands most often lose. Some categories also require a written agreement for a licence, such as a cosmetics loan licence; ask the licensing office what it needs.

The clauses that matter most

Our own checklist from practice and trade explainers, not a statutory list. A lawyer should adapt it to your product and State.
ClauseWhat to writeIf you skip it
Product and specificationA written spec: materials, formulation or pattern, dimensions, packaging, approved sample referenceA "similar" product ships and you cannot show it is wrong
Quality and testingTest reports per batch, who tests, accepted tolerance, what happens to rejected unitsYou pay for stock you cannot sell
Minimum order and priceMOQ per SKU, price steps by quantity, how long the price holds, when it can changeA price rise after your first sell-out
Lead time and delayDays from order to ready stock, a remedy if lateYour ad budget runs while stock is delayed
PaymentAdvance, balance on dispatch or inspection, who bears tax and freightCash gone with no goods
Ownership of IPFormula, pattern, design, artwork, moulds, tooling: who owns eachThe maker keeps the one thing you needed
Exclusivity and confidentialityMaker will not sell your product or a copy to others; NDA on specsYour product appears under another label
Audit and inspectionRight to visit and inspect before dispatchNo way to check quality
Recall and liabilityWho bears the cost of a defective or unsafe batchYou refund customers and the maker walks away
Term and exitHow long it runs, notice to end it, return of tooling and stock, handover of filesStuck with a maker you cannot leave

Money and timing: where first-time brands lose most

Advances are the usual flashpoint. A large share paid upfront with no inspection right leaves you with nothing to bargain with if the batch is wrong. Try to tie part of the balance to an inspection or a pass report, and put the advance against a written purchase order that names the specification. Check whether the maker charges for tooling, moulds, screens or a custom pattern, and who keeps them if you leave.

Minimum order quantity (MOQ) differs sharply by maker and by SKU. Third-party skincare listings show 500–2,000 pieces per SKU; apparel units and small-batch makers can be lower. Ask whether MOQ applies to each colour or fragrance separately, and whether a smaller first batch costs more per unit. See MOQs and samples for how to negotiate a first order.

Quality, rejection and recall

  • Define "defective". A percentage tolerance and a test method, not "good quality".
  • Say what happens next. Replace, rework or refund, within how many days, at whose cost including freight.
  • Keep a retained sample from each batch with the batch number, signed by both sides. It is your evidence if a customer complains months later.
  • Recall. If a batch is unsafe, who contacts customers, who pays for stock returned and who talks to the regulator? Put it in writing.
  • Insurance and licences. Ask for proof of the maker's licences and ask them to notify you if a licence lapses or changes.

For how to check a batch yourself once stock arrives, see quality control for every batch.

If you are small, or already bigger

A starter brand ordering a few hundred units has little leverage. Keep the agreement short: specification, price and MOQ, a clean ownership clause and an exit clause. A lawyer's review of a 4 to 6 page draft is far cheaper than a dispute. A brand with steady volume can ask for price review dates, volume rebates, a second source and agreed lead-time penalties. At that size, a maker who refuses to put anything in writing is telling you something.

What usually goes wrong

  • Signing the maker's standard form without reading the IP and exclusivity clauses.
  • Specification written as "as per sample" with no sample reference signed by both sides.
  • A full advance paid before a pre-dispatch check.
  • No clause on who owns tooling, so the mould stays with the maker when you leave.
  • An agreement that is not stamped or signed by the right person for the maker.
  • Letting the agreement lapse while the relationship continues on purchase orders.

This page is general information, not legal advice. Agreements, stamp duty and enforcement differ by State; have a lawyer review the draft before you sign and pay.

Before you pay the first advance

Pair this page with who owns the formula. If your draft is already in hand, tell us what it says and a person can point you to a lawyer who handles brand contracts.

Questions people ask

Do I need a lawyer for a small first order?

It is wise. A short review before you pay an advance costs little compared with the order. At minimum, make the maker sign a purchase order that names the specification and the approved sample.

Can a maker refuse to sign an agreement?

Yes, and many small makers prefer purchase orders. If they will not sign anything beyond a quotation, treat the first order as a test and keep it small.

Is a stamped agreement required?

Stamp duty on agreements differs by State and by the type of document. Check your State's rule or ask your lawyer before signing.

This is general information, not legal advice. Rules and fees change and differ by state and city; confirm with the department or a professional before you apply.

Where these numbers come from

  1. Minimum order quantity on third-party manufacturing listings: 500–2,000 pieces per SKU (India; IndiaMART private-label skincare listings (500, 1,000 and 2,000 seen); apparel, food and home goods not collected). Reported: IndiaMART listing (checked research 2026-11-14), checked 13 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Legal and licences · Product brands

More on legal and licences for a product brands

9 pages on this. You are on number 5.

  1. What are TCS and TDS on my brand's marketplace sales, and how do I claim them back?
  2. What must be printed on my product's label under Legal Metrology: MRP, quantity, date, origin and customer care?
  3. What do the E-Commerce Rules and dark-pattern rules require from a brand that sells online?
  4. What should a manufacturing agreement with my maker say?
  5. If a factory makes my product, who owns the formula, the pattern or the design?
  6. What can my brand claim in ads and on labels, and what are the rules for influencers?
  7. Does my brand need plastic-packaging EPR registration?
  8. When does my brand need an e-way bill to move goods?

and 1 more.

Reading about it is one thing; doing it in your product brands is another. If you'd like a hand getting your licences and paperwork right, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Next question · 5 of 8 in Getting the product madeIf a factory makes my product, who owns the formula, the pattern or the design? →

Where are you?

One tap, and we point you to the right next step.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert