Product brands · 5 min read

If a factory makes my product, who owns the formula, the pattern or the design?

The short answer

Unless a written agreement says otherwise, assume the factory keeps what it developed. In private label the base formula or pattern usually stays with the maker, and you own only your name, artwork and trademark. If you gave the maker your own formula, pattern or design, you can protect it with a confidentiality clause, an ownership clause and an exclusivity clause, but only if they are written down before the first batch. Trademark, designs and copyright can be registered; a recipe or formula itself usually cannot, so contracts do the work.

Not sure about your case? Ask an expert, free ↓

The reorder that came back different

The first batch sold well. The second smells slightly different, the maker says a raw material changed, and then a stockist mentions a similar-looking product from another brand made at the same unit. You never wrote down who owns what, and now you cannot prove the product was yours. Trade explainers and reports on private-label products describe this pattern: many marketplace "brands" turn out to be relabelled products from the same few factories.

A single page cannot settle this for every category, but the principle is simple: the person who can show they created it and wrote the ownership down owns it. Everything below is about collecting that proof.

Which of your three models are you in?

General position described by trade and legal explainers; contracts and the facts decide each case. Not legal advice.
ModelWho usually owns the formula, pattern or designWhat you ownWhat to ask for
White label: the maker's finished product with your nameThe maker, and others may sell the same productYour name, packaging, listing and trademarkAt least exclusivity for your category and region
Private label: the maker's base formula or pattern with changes for youThe maker keeps the base; you may own your changes only if the contract says soYour changes, name, artwork, trademarkA clause that your variant is exclusive and not sold to others
Contract manufacture to your own formula, pattern or designYou, if you can prove you created it and the contract says it stays yoursFormula, pattern, design, artwork, nameOwnership clause, confidentiality, no-copy and no-sale clauses, return of files on exit

If the maker's staff improve your formula during development, the contract should say who owns the improvements. Without that line, both sides may claim them. For the difference between white label, private label and contract making, see white label, private label and contract manufacturing.

What you can register and what you cannot

  • Trademark. Your brand name and logo can be registered in a class that matches your product. The filing fee is ₹4,500 per class per mark per class for an individual, startup or small enterprise and ₹9,000 per class per mark for others. File in your own name or your company's, not the maker's. A separate page on registering a trademark is planned for this library.
  • Design. A new shape, pattern or configuration of a product can sometimes be registered as a design. A pattern in a fabric, a bottle shape or a distinctive pack may qualify; the idea or function does not.
  • Copyright. Artwork, photographs, copy and packaging illustrations are yours the moment you create them, but get written assignment from any freelancer or agency who made them.
  • Formula or recipe. The formulation itself is usually protected by confidentiality and contract, not by registration. This is why the NDA and ownership clauses matter more than any filing.

Clauses to write before the first batch

  • Ownership. A line stating that the formula, specification, pattern, artwork and any improvements developed for your product belong to you.
  • Confidentiality. An NDA that survives the end of the contract, with a named list of confidential material.
  • No-copy and no-sale. The maker will not make, sell or supply the same or a confusingly similar product to anyone else.
  • Staff and subcontractors. The maker must bind its own staff and any subcontractor to the same terms.
  • Tooling and files. Moulds, screens, patterns and digital files stay yours and are returned when the contract ends.
  • Exit. If you leave, the maker hands over specification and test data needed to move production elsewhere.

Put these in the agreement described on what a manufacturing agreement should say. Date and sign a copy of the specification and keep it with the retained sample from the first batch.

If you are small, or already bigger

A small brand buying white label cannot own the product, and should not pretend to. Differentiate through name, pack, content and service, and register the trademark early. A brand with its own formula should disclose it to the maker only after an NDA, and consider holding back one critical ingredient or step. A larger brand moving to a second maker should check the first contract's exit clause before it asks for samples, because moving without it may breach confidentiality or exclusivity.

What usually goes wrong

  • Assuming that paying for development means owning the result.
  • Letting the maker file the trademark or design, so it is theirs.
  • Sharing the full formula before signing anything.
  • Changing makers without a handover, and finding the old one keeps the specification.
  • Relying on a verbal "we won't sell this to anyone".
  • Not keeping records of who developed what and when.

This page is general information, not legal advice. Intellectual property law is fact-specific; have a lawyer who handles brand contracts review your draft before you share a formula.

Protect your own product

Once ownership is clear, the next job is checking the factory itself: how to check a factory. If the maker has already sold a copy, tell us what happened.

Questions people ask

Can I stop a factory selling a similar product to someone else?

Only if a written clause says so. Without one, a maker may sell what it developed. A trademark protects your name, not the product itself.

Do I need to register a design?

Only if the shape or pattern is new and valuable enough to protect. For a simple product it may not be worth the cost; for a distinctive bottle, motif or pack it might be.

What if I change makers?

Check the exit clause first. Without a handover of the specification and your files, you may have to rebuild the product from scratch.

This is general information, not legal advice. Rules and fees change and differ by state and city; confirm with the department or a professional before you apply.

Where these numbers come from

  1. Trade mark application fee, e-filed, individual, startup or small enterprise: ₹4,500 per class per mark (all India). Official source: IP India, trade mark official fees (checked research 2026-11-14), checked 13 November 2026.
  2. Trade mark application fee, e-filed, anyone else: ₹9,000 per class per mark (all India). Official source: IP India, trade mark official fees (checked research 2026-11-14), checked 13 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Legal and licences · Product brands

More on legal and licences for a product brands

9 pages on this. You are on number 6.

  1. What are TCS and TDS on my brand's marketplace sales, and how do I claim them back?
  2. What must be printed on my product's label under Legal Metrology: MRP, quantity, date, origin and customer care?
  3. What do the E-Commerce Rules and dark-pattern rules require from a brand that sells online?
  4. What should a manufacturing agreement with my maker say?
  5. If a factory makes my product, who owns the formula, the pattern or the design?
  6. What can my brand claim in ads and on labels, and what are the rules for influencers?
  7. Does my brand need plastic-packaging EPR registration?
  8. When does my brand need an e-way bill to move goods?

and 1 more.

Reading about it is one thing; doing it in your product brands is another. If you'd like a hand getting your licences and paperwork right, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Next question · 6 of 8 in Getting the product madeHow many units should your brand make in its first batch? →

Where are you?

One tap, and we point you to the right next step.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert