D2C brand · 5 min read

Should my D2C brand make its own product, or use a contract maker?

The short answer

Use a contract maker until three things are true: demand is steady and large enough to keep your own unit busy, you know the product well enough to make it consistently, and you can carry the machines, licences, staff and raw material stock. Making it yourself buys control, speed of change and a better gross margin; it costs cash, fixed overheads and management time. Most small D2C brands begin with a maker and bring production in only for the lines that earn it.

Not sure about your case? Ask an expert, free ↓

The kitchen that became a factory

A founder makes her first batches in her own kitchen, sells out on Instagram and decides to get a unit "to have control". Six months later she has a lease, a mixer, two helpers and a licence application. Sales are good, but not good enough to keep the unit busy in a slow month, and she spends her day on the floor instead of on the brand. The unit was the right idea at the wrong size.

What each route gives and costs

A qualitative comparison. We have no sourced capex range for a small unit, since it depends on the product and category. Get quotes for your own equipment, rent and licences.
Contract makerOwn unit
Money upfrontSmall to moderate: minimum order, samples, packagingMachines, premises, licences, raw-material stock
Fixed cost each monthNoneRent, staff, power, maintenance
Control of quality and changeLess: you depend on the maker's processFull, if you have the skill
Gross marginMaker's margin is inside the priceRoom to improve if volume is steady; the line analysts quote is 60% or more; 70% or more copes best with quick commerce
LicencesOften the maker's; a cosmetics brand using someone else's plant needs a loan licence (Loan licence: application COS-6, licence COS-9, decided by the State authority within 45 days if requirements are met; valid in perpetuity with a retention fee before 5 years)Yours, for the unit and the product
StaffNone for productionWorkers, a supervisor, and EPF and ESI once you cross EPF at 20 employees; ESI at 10 persons
Speed to new productDepends on the maker's queueAs fast as you can plan it
RiskCopy, drift, a maker who stops answeringIdle capacity, a bad month, a regulatory visit

Signs it is time to bring production in

  • Volume is steady, not a few viral weeks. You can predict three to six months of demand.
  • The maker is the bottleneck: long queues, minimums that force bad batches, or quality drift you cannot fix by checking.
  • Your edge is the product, and you worry about leaks or copies.
  • You know how to make it, or you have someone who does, and can write the process down.
  • The numbers work: your own unit cost per piece, including a fair share of rent and staff, is clearly below the maker's price at your volume.
  • Cash is available for equipment and stock without starving ads and operations.

None of this means all or nothing. Many brands bring in one line, such as the hero product, and keep a maker for the rest. See a brand that makes its own product for what that type looks like.

A simple cost check

  1. Maker's landed price per piece at your volume.
  2. Your own cost: raw material per piece, labour per piece at the output you can really reach, a share of monthly fixed cost divided by the pieces made, wastage and packing.
  3. Compare at three volumes: a slow month, a normal month and a peak. If your unit only wins at the peak, stay with the maker.
  4. Add the one-time cost of machines and licences, and spread it over the number of pieces you expect over its life.

Do not borrow a launch budget for this. The published launch scenarios (for example ₹3,00,000–6,00,000 for one product in the first 90 days) are planning figures for selling one product, not for building a unit. A unit is a different budget.

A path many brands take

  • Start with a white-label or private-label product to prove demand; see white label or a custom product.
  • Move to a custom spec with a contract maker once repeat buyers show.
  • Run a small pilot batch yourself, in a rented bay or a shared facility, to learn the process.
  • Commit to your own unit only when volume, margin and know-how are in place.

A shared or rented production bay, offered by some contract makers and clusters, can give you control of a few batches without owning machines.

What usually goes wrong

  • Buying machines for the viral peak, then running them half empty.
  • Underpricing your own time, so the unit looks cheaper than it is.
  • Forgetting licences: premises, product and, for food and cosmetics, hygiene standards.
  • Taking on staff before you have a process to train them on.
  • Spending the founder's days on the floor and none on sales.

Apply it to your brand

Write your maker's price and your own estimated unit cost at three volumes. If you win at the slow month's volume with a margin of safety, price the one-time costs. If not, keep the maker and spend the effort on the agreement and the standard. Tell us where you are if you want help comparing the two on your numbers.

Questions people ask

How much does it cost to set up a small manufacturing unit?

It depends on the product and category. We have no sourced range. Ask equipment suppliers and your licence authority for quotes, and add rent, deposit and raw-material stock.

Do I need a licence to make cosmetics or food myself?

Yes, categories like these have premises and product licences. The category rules decide the detail; check with the licence authority for your product.

Can I use a contract maker and my own unit together?

Yes. Many brands make their hero product in-house and use makers for the rest.

Where these numbers come from

  1. Gross margin that lets a brand carry ads and returns: 60% or more; 70% or more copes best with quick commerce (India; analyst reading of 34 brands). Ballpark The CPG Lab Substack scan of 34 Indian D2C brands (2026) read gross margin off filings; the analyst's own judgement, not a rule.
  2. Licence for a cosmetics brand that uses a contract maker: Loan licence: application COS-6, licence COS-9, decided by the State authority within 45 days if requirements are met; valid in perpetuity with a retention fee before 5 years (India; Cosmetics Rules 2020; category business will own the depth). Official source: CDSCO, Cosmetics Rules 2020 (checked research 2026-11-14), checked 13 November 2026.
  3. Staff counts at which EPF and ESI start: EPF at 20 employees; ESI at 10 persons (India; Code on Social Security; basics.epf-employee-threshold and basics.esi-employee-threshold hold the wage ceilings). Official source: India Code (checked research 2026-11-14), checked 13 November 2026.
  4. First-90-day cost, proper scenario: ₹3,00,000–6,00,000 (all India; Razorpay planning scenario; its own line items add to ₹3.6 to 7.1 lakh). Reported: Razorpay blog (checked research 2026-11-14), checked 13 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Operations · D2C brand

More on operations for a d2c brand

23 pages on this. You are on number 23.

  1. Which order, shipping and returns tools does a small D2C brand need?
  2. How much advance should a D2C brand pay a maker, and how do I protect it?
  3. What should a D2C brand have ready in the last two weeks before launch?
  4. Can I start a D2C brand while keeping my job?
  5. The factory sells the same product to someone else. Can my D2C brand stop it?
  6. The factory changed the material or formula without telling my D2C brand. What now?
  7. A bad batch is already sold. What should my D2C brand do for the customers and the brand?
  8. Should my D2C brand make its own product, or use a contract maker?
All 23 on operations →

Reading about it is one thing; doing it in your d2c brand is another. If you'd like a hand running it smoothly day to day, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

You finished the chapterBack to White label, contract makers and your own unit →

Where are you?

One tap, and we point you to the right next step.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert