Product brands · 5 min read

Minimum order quantity and samples: how to get a smaller first order from a maker

The short answer

A minimum order quantity (MOQ) is the smallest batch a maker will run for one item, because setting up a machine, a fabric roll or a mixing batch costs the same whether you order 50 pieces or 500. Listings you will see in private-label skincare quote minimums of a few hundred to a couple of thousand pieces per item. You can often get below the MOQ by accepting a standard pack, fewer variants, a higher price per piece or a different maker. Always pay for samples and test them before you commit.

Not sure about your case? Ask an expert, free ↓

"Minimum 1,000" and ₹60,000 of savings

A new founder finds the right face wash on a listing. The price per piece looks small, the minimum is 1,000, and the maths says ₹70,000 before packaging, labels, testing and GST. Her savings for the whole launch are ₹60,000. She does not ask whether 1,000 is a fixed rule or a starting position, and so she drops the idea. A founder with the same product and a better question would have found out that there were makers with a lower minimum and that this one would run 300 in a standard bottle.

Why a minimum exists, and what listings show

A maker has to prepare a machine, mix or cut a batch, clean down and pack. Those costs are fixed per run, so small runs earn them almost nothing. The MOQ is the point where your order is worth running. It is also a way to filter casual enquiries.

Seller-posted private-label skincare listings we read in November 2026 showed minimums of 500, 1,000 and 2,000 pieces per item, with posted prices of about ₹50 to ₹140 a piece depending on the product. One manufacturer's guide said custom creams and lotions usually start at 500 to 1,000 units per item and asked buyers to request quotes. These are listing prices, before packaging, labels, GST and testing, and they are a starting point for a call, not a quote. Apparel, food and home goods minimums were not collected; ask your own makers.

Minimums are per item, not per order. Three shades or sizes of one product are three items, each with its own minimum, unless the maker agrees otherwise.

How to get below the minimum

  • Take the standard version. The maker's usual bottle, bag, fabric or colour is cheaper to run than a custom one. Your label and outer pack carry the brand.
  • Cut variants. One shade or size at the full minimum beats four at a quarter each.
  • Offer a higher price per piece. A first order at a premium is fair if the maker takes the setup loss. Put it in the quote and promise a repeat order at the normal price if the batch sells.
  • Promise a plan, not a favour. "If the first 300 sell, the next order is 1,000 within three months" is worth more than "please".
  • Combine with another brand. Some makers will pool two small orders for the same base. Ask; many do not advertise it.
  • Try a smaller maker or a cluster tailor. Small units often accept lower minimums than plants built for large clients. Founders' accounts of small kurti brands describe starting with ten pieces from a local tailor and moving to a unit with a minimum of 250 later.
  • Ask about ready stock. A maker may have a catalogue item already made that you can label for a few dozen pieces.

How to sample without wasting money

  1. Pay for samples. Free samples are usually catalogue stock; a paid sample is closer to what you will receive.
  2. Order from two or three makers and compare side by side. Number each sample and write what you asked for on a tag.
  3. Sample the packaging as well as the product. Leakage, colour bleed or a loose seal show up only when you ship one.
  4. Test it the way a customer will. Wash a garment ten times. Leave a cream in a warm room for two weeks. Drop-test a bottle in its pack.
  5. Hand samples to five people who will tell you the truth and ask what they would change.
  6. Revise once or twice, then freeze. Each revision costs time; write the final spec into the quote.

Asking for a sample of the batch that will actually be sent, not a hand-made one, is the single most useful request. A good maker will agree to a "pre-production sample" for a fee. See how to check the factory for a signed quality standard.

What usually goes wrong

  • Taking the MOQ as law, then buying more stock than the first month can sell. A bigger first order is not a cheaper brand; it is a bigger bet. See how many units to make first.
  • Ignoring the costs that sit on top of the piece price: packaging, labels, testing, freight, GST.
  • Getting a low MOQ by accepting a lower-quality material, then finding the reviews punish it.
  • Changing the product after sampling and not re-sampling.
  • Treating a verbal "you can order less next time" as a term. Write it in the quote.

Apply it to your quote

Take your lowest serious quote and work out the cash the minimum ties up: pieces times landed cost, plus packaging and testing. If that is more than you can afford to lose, go back with one of the tactics above. If you are stuck, tell us where you are.

Questions people ask

Can I negotiate the MOQ?

Often, yes, especially for a first order and for a standard pack. Expect to pay more per piece or give up variants. Ask in writing and ask what the maker would need to say yes.

Do I have to pay for samples?

You usually should. Many makers charge for samples and some adjust the fee against a later order. Ask before you order.

Is a lower price per piece at a higher MOQ worth it?

Only if you can sell the extra stock in a time that does not strain your cash. Compare the saving per piece with the cost of stock sitting unsold.

Operations · Product brands

More on operations for a product brands

16 pages on this. You are on number 10.

  1. How to plan stock and cash for Diwali, wedding and sale seasons in your brand
  2. Which courier or shipping aggregator should your brand use in India?
  3. Minimum order quantity and samples: how to get a smaller first order from a maker
  4. What is an NDR in shipping, and what should your brand do when a delivery attempt fails?
  5. How to pack products so they arrive unbroken without overspending on packaging
  6. What happens when a courier loses or damages your customer's parcel?
  7. How many units should your brand make in its first batch?
  8. How should your brand set a return and refund policy in India, and what must it honour by law?

and 8 more.

Reading about it is one thing; doing it in your product brands is another. If you'd like a hand running it smoothly day to day, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Next question · 4 of 8 in Getting the product madeWhat should a manufacturing agreement with my maker say? →

Where are you?

One tap, and we point you to the right next step.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert