D2C brand · 4 min read

What should I ask a D2C product maker at the first meeting?

The short answer

Bring a one-page brief and ask the same dozen questions of every maker: who else buys this product, your minimum per item and the price at three quantities, what the quote includes, the sample cost and time, the lead time per batch, how they check quality, what licences they hold, who owns the formula or pattern, payment terms, what happens to a faulty batch, and whether they will put it in writing. Write down their answers in the meeting, and send them a summary the same day.

Not sure about your case? Ask an expert, free ↓

Forty minutes, no notes

A founder drives two hours to a unit, is shown the machines, drinks a cup of tea and is told "don't worry, we will take care of everything". She comes home with no price in writing, no lead time and no idea whether the maker's other customers include her rival. A week later the quote arrives, higher than the phone price, with a minimum she did not hear.

A first meeting is the cheapest chance to learn how a maker works. Go with a brief and a list, and leave with numbers.

What to bring

  • A one-page brief: product, variants, target quantity range, target landed cost, quality standard, pack, label.
  • A reference sample or photos of what you want, and what you do not.
  • Your question list printed or on your phone.
  • A notebook, or permission to record notes on your phone.
  • Your GST number and a visiting card, so you look like a buyer, not a browser.

A brief that says what quality you want in numbers (dimensions, fabric weight, ingredient list, shelf life) gets a more accurate quote than a brief that says "good quality".

The questions, in order

A question set from how operators and sourcing guides describe a first supplier meeting. Adapt it to your category.
TopicAskWhy it matters
Who else buys itDo you make this exact product for other brands? Can you tell me how many?White label means others have the same product. Listed minimums run 500–2,000 pieces per SKU per item, so ask what your minimum buys.
PriceWhat is the price per piece at three quantities, and what is excluded: packaging, labels, testing, freight, GST?Listing prices are before extras
SampleWhat do samples cost, how long do they take and is the sample the same as bulk?Free samples are often catalogue stock
Lead timeHow many weeks from advance to dispatch, and what happens at Diwali?Plan stock around real lead times
QualityWhat do you check, and can I see a record? Can I inspect before dispatch?Quality is a process, not a promise
LicencesWhich licences do you hold for this product, and can I see them?Category rules apply to you as well
OwnershipWho owns the formula, pattern or design? Will you sign a confidentiality and non-compete clause?The maker often keeps the base
PaymentWhat advance, what milestones, what balance before dispatch?See the advance page
FaultsIf a batch is bad, what do you do and by when?A maker with no answer has a problem
CapacityWhat is your usual order size and where would my order stand?A big plant may deprioritise you

Read the room

  • Do they ask you questions back? A maker who asks about your market, your pack and your shelf life is planning to make something good.
  • Do they tell you what they cannot do? That is a good sign.
  • Is the person you spoke on the phone the person who decides? If not, meet the decision maker.
  • Is the unit clean and organised, with other brands' stock visible?
  • Do they hesitate on exclusivity, licences or put-in-writing? Note it.

For a full factory visit checklist, see how to check a factory's quality before you pay.

After the meeting

  1. Send a summary the same day: "Per our meeting, you will quote X at three quantities, sample in Y days, minimum Z." Ask them to confirm.
  2. Ask for the quote in writing with all inclusions and exclusions.
  3. Meet two or three makers and compare; see how to find a maker.
  4. Order paid samples from the two you like most. Test them; see minimum orders and samples.
  5. Hold the advance until you have a written agreement; see how much advance to pay.

What usually goes wrong

  • Meeting only one maker, so you have no yardstick.
  • Accepting a verbal price. It will be different on paper.
  • Forgetting to ask what is excluded.
  • Falling for the tour and the tea, and skipping the hard questions.
  • Telling the maker your full plan and budget, then getting a quote shaped to your budget.

You do not need to be rude to ask these questions. A good maker expects them and may respect you more for asking.

Apply it to your meeting

Print the question table, fill the brief and book two makers in the same week so the meetings are fresh together. If you want someone to go through a quote with you, tell us where you are.

Questions people ask

Should I tell a manufacturer my budget?

Share a target landed cost range, not your full budget. A maker who knows how much you can spend will often shape the quote to match it.

How many manufacturers should I meet?

Two or three, in the same week if you can. You need more than one price and one way of working to compare.

Do I need an NDA before sharing my idea?

For a custom product, a confidentiality and non-compete agreement is worth asking for before you share a formula or design. For a catalogue white-label product, there is little to protect yet.

Where these numbers come from

  1. Minimum order quantity on third-party manufacturing listings: 500–2,000 pieces per SKU (India; IndiaMART private-label skincare listings (500, 1,000 and 2,000 seen); apparel, food and home goods not collected). Reported: IndiaMART listing (checked research 2026-11-14), checked 13 November 2026.

Fees, rates and rents change. Check the official source before you pay or sign anything.

Operations · D2C brand

More on operations for a d2c brand

23 pages on this. You are on number 11.

  1. My D2C stock is not selling. Should I discount, bundle, liquidate or write off?
  2. What do I do when a marketplace suspends my D2C seller account?
  3. What should I ask a D2C product maker at the first meeting?
  4. How much should my D2C product's packaging cost, and when is it too much?
  5. How should an Instagram or WhatsApp D2C brand handle COD risk?
  6. How do I write SOPs so my D2C brand runs without me?
  7. Return-to-origin (RTO) rates in India, source by source
  8. Which order, shipping and returns tools does a small D2C brand need?
All 23 on operations →

Reading about it is one thing; doing it in your d2c brand is another. If you'd like a hand running it smoothly day to day, tell us where you are and a person will reply, free.

Get help with this ↓

What now?

Next question · 4 of 15 in White label, contract makers and your own unitHow to check a factory's quality before you pay for your brand's first batch →

Where are you?

One tap, and we point you to the right next step.

Menu

Read

Ask an expert Ask an expertFree, real peopleHub
Ask an expert